The RCNetwork I had no idea they offered different options, I use the “Bedliner” type ones, the coating just feels so durable. For anyone wondering it’s just a fine sandy textured coating, very nice rough finish but not too rough.
The RCNetwork I just started Brazing up a cage for a tundra, I’ve got a BJ75 body on the way and a Mojave that I’m going to do next. It’s way easier than it seems.
@@TheRCNetwork I live in the Mojave Desert, and ADV is short for Adventure. I was doing some motorcycle adventure riding stuff, off-road and rally racing. Got into the RC stuff will recovering from a moto crash.
I don't have the trx 4 but one thing that always got me was also the stock bumpers, I have to admit it looks amazing and really dressed up that body, I am very impressed, as always I love RCNetwork and look forward to the video's, I am a little late to this one because I don't remember getting the notification,ty
Good video as always. I wanted to commend you for staying true and consistently delivering quality RC content that’s hard to find on RUclips. God bless
And there you have it another great video well done I really enjoy the scalerfab products I have quite a few of their bumpers and skid plates on a bunch of my custom crawlers. Love your reviews
You mentioned putting up a link to where someone could you and purchase these items, did not see one anywhere. I've got there 79 bronco trx4 and looking for a different bumper.
Hi, amazing video once again, I’ve just ordered some. Your black arches did you paint them from the inside or the outside? Also is it just a Matt Black?
Ian Moughton yeah, funny story. I painted the entire body that blue....forgot to make the flares black. Ended up re-taping the outside of the body and sprayed black and then some testors Dullcote (flat clear)
Can you please tell us what the internal width/measurement is (in millimeters) for the rail mount bars/slots on the bumpers? I have a different crawler and wanted to know if this bumper kit would fit it's chassis rails. Also, if you pull the front bumper all the way forward, is there enough room to fit a winch between the body and lower/front bumper plate? Thanks.
@@javyjav1977 genius, I was there…..these bumpers were stock on the TRX4chassis kit I built. I put the camper body on, which needed different sized bumpers. Go take a look since you’re the expert here: traxxas.com/products/models/electric/trx-4-kit
@@TheRCNetwork Well servo might not have common traxxas servo burning issues but its really overpriced for what you get. Same goes for the batteries you can get the gens for half the price and get tiple the performance. I work at traxxas specialised hobby store and belive me I've tested both many times. Servo might not have failed on me but for its price it underperforms.
Ev0ltion I get it, and everyone has options and budgets. Is Traxxas over priced in comparison? Sure....but they also have responsibilities. For $99 for the 400 oz/in servo from Traxxas, you get the backing of a warranty. Sure, you can get an “ABC” brand servo with 400oz/in for $69-75 but good luck if anything goes wrong, of if that servo is even really 400oz/in. I’m a huge GensAce fan as well, but they’re not perfect either. I’ve had just as many TRX batteries puff as Gens Ace.
Well my expirience with savox as a cheaper brand was pretty flawless out of like 20 servox i've burned one(totally my fault. Forgot to turn off my baja before switching radio to the other car so the brake was engaged stressing servo for like an hour) Still got the warranty refound (distributor was waiting for delayed shipment) right away. But to sum it all up we all have diffrent expiriences and base what we use on them. All i know for sure is that these bumbers look good :P
What bumper do you run? 🤔
The RCNetwork I had no idea they offered different options, I use the “Bedliner” type ones, the coating just feels so durable. For anyone wondering it’s just a fine sandy textured coating, very nice rough finish but not too rough.
Stock custom cut. But i did order a scalerfab front bumper for the fact my plastic one is breaking.
Nice!
I need to learn how to weld next!
The RCNetwork I just started Brazing up a cage for a tundra, I’ve got a BJ75 body on the way and a Mojave that I’m going to do next. It’s way easier than it seems.
You know you're doing a great job when a person that doesn't own the product you're working on still watches the content. Well done Sir.
Mojave ADV Exactly, I agree with you. I’m not even into this hobby but I dig his video-style and attention to detail.
Wow, thanks MADV! Glad to have you watch.
Still trying to figure out what your handle means....
@@TheRCNetwork I live in the Mojave Desert, and ADV is short for Adventure. I was doing some motorcycle adventure riding stuff, off-road and rally racing. Got into the RC stuff will recovering from a moto crash.
Ahhhh, makes sense
Scaler fab is my go-to bumper and slider shop. The coating is very nice and they feel very good. Keep it up Rich.
Yep, great stuff! I had the bedliner coating on the bomber set up.
I don't have the trx 4 but one thing that always got me was also the stock bumpers, I have to admit it looks amazing and really dressed up that body, I am very impressed, as always I love RCNetwork and look forward to the video's, I am a little late to this one because I don't remember getting the notification,ty
Thanks DD for tuning in! The TRX4 has truly impressed me...and I agree, the stock bumpers had to go!
Coming back to your video 😄... still so awesome and thanks for introducing the Scalerfab for me 👍... they look fantastic
Glad to help, buddy!
I like the white cab, nice rig brother...
Thanks buddy!
Good video as always. I wanted to commend you for staying true and consistently delivering quality RC content that’s hard to find on RUclips. God bless
Thanks GC! My style won't change...just my upload consistency for now. Thanks for sticking around!
Very cool!!! I'm going to order that rear bumper!!!
Nice! It's great stuff
And there you have it another great video well done I really enjoy the scalerfab products I have quite a few of their bumpers and skid plates on a bunch of my custom crawlers. Love your reviews
Thanks James! ScalerFab makes some great stuff - They're quality has always been great, and as of late, the details are even better
You mentioned putting up a link to where someone could you and purchase these items, did not see one anywhere. I've got there 79 bronco trx4 and looking for a different bumper.
all links are in the video description
I wonder if the front bull bar bumper would fit my trx4 blazer🤔🤔🤔?
You may have to notch the body a bit...
Nice video and good info 😉👍.... I like the way you have painted the body 😄👍
Thanks MG! I appreciate the kind words
Awesome vid! I checked out those bumpers.... Thanks!
No problem 👍
That's a nice looking truck
Thanks Paul!
Hi, amazing video once again, I’ve just ordered some.
Your black arches did you paint them from the inside or the outside?
Also is it just a Matt Black?
Ian Moughton yeah, funny story. I painted the entire body that blue....forgot to make the flares black. Ended up re-taping the outside of the body and sprayed black and then some testors Dullcote (flat clear)
Looking awesome dude, Love it. They do have great products. Appreciate you sharing rich as always Great videos
Andy Richey thanks Andy - always cool seeing you in the comments! 😃👍
Nice mods! Are those the factory fender liners? Mine are so huge
The inner fenders? No, the ones that cam in the kit are really wide. I opted for the stock narrow fenders to fit the Sport body better
@@TheRCNetwork thanks. I was thinking of getting that body. But I have crawler kit w/ wide fenders. Sucks trying to find a body that fits as is.
Can you please tell us what the internal width/measurement is (in millimeters) for the rail mount bars/slots on the bumpers? I have a different crawler and wanted to know if this bumper kit would fit it's chassis rails. Also, if you pull the front bumper all the way forward, is there enough room to fit a winch between the body and lower/front bumper plate? Thanks.
My body doesn’t fit in the back
You have to really fit it to the bumpers....I had to trim a bit of body and adjust the body mounts to make it all work
Hi, where did you get the rear canopy from please ?
The camper shell? Traxxas offers a truck version and this camper version.
will the front bumper qualify for class 2?
I'm not sure on the Class 2 specs....maybe a quick note to ScalerFab?
Do you have a part number for this rear pre-runner bumper that fits the Sport Body well?
www.scalerfab.com/products/trx4-sport-prerunner-series-rear-bumper?variant=27914691444759
Do they ship to Portugal?
Contact Scaler Fab, I'm sure anything is possible
Sweet great video
William Green thanks WG!
will this fit for the trx4 bronco?
It will fit....but not ideal as you may have to cut additional of the body
@@TheRCNetwork ok tanks
is it possible to ship them to germany?
Contact Scalerfab - I have a link to their site in the description
where can i get these in the uk
As far as I know, only from scalerfab.com
Well no shot Sherlock, you have the defender bumpers on
They were the bumpers from the Chassis kit, genius.
Mm those are different bumpers then my stock sport odd
Yeah, this was the regular builders kit
Them the ain’t the stock bumpers, of course they gonna stick out wider. Lol
They're stock for the TRX-4 Chassis Kit....
@@TheRCNetwork this ain’t for the trx4 sport tho. Those for a different trx4
@@javyjav1977 genius, I was there…..these bumpers were stock on the TRX4chassis kit I built. I put the camper body on, which needed different sized bumpers. Go take a look since you’re the expert here: traxxas.com/products/models/electric/trx-4-kit
@@TheRCNetwork what I’m saying is THOSE ones in the beginning ain’t for the sport. I have the sport they never once stuck like that.
@@TheRCNetwork so I’m right then. Those are a different trx4 NOT the sport that u show in the beginning
Nice bumpers, but much too expensive for what they are.
They're handmade steel bumpers. The value, IMO is there
My trx4 did not come with those awful looking bumpers
I had the Chassis Kit, so it was meant for a different body than the Sport (which is a bit narrower)
👍🏽🐒
Thanks for stopping by!
Traxxas servo and batteries D: Overpaid and overall weak.
Ev0ltion I can’t comment on the battery yet, but this servo is different from the typical TRX servos. js
@@TheRCNetwork Well servo might not have common traxxas servo burning issues but its really overpriced for what you get. Same goes for the batteries you can get the gens for half the price and get tiple the performance. I work at traxxas specialised hobby store and belive me I've tested both many times. Servo might not have failed on me but for its price it underperforms.
Ev0ltion I get it, and everyone has options and budgets. Is Traxxas over priced in comparison? Sure....but they also have responsibilities. For $99 for the 400 oz/in servo from Traxxas, you get the backing of a warranty. Sure, you can get an “ABC” brand servo with 400oz/in for $69-75 but good luck if anything goes wrong, of if that servo is even really 400oz/in. I’m a huge GensAce fan as well, but they’re not perfect either. I’ve had just as many TRX batteries puff as Gens Ace.
Well my expirience with savox as a cheaper brand was pretty flawless out of like 20 servox i've burned one(totally my fault. Forgot to turn off my baja before switching radio to the other car so the brake was engaged stressing servo for like an hour) Still got the warranty refound (distributor was waiting for delayed shipment) right away.
But to sum it all up we all have diffrent expiriences and base what we use on them. All i know for sure is that these bumbers look good :P
@@Ev0ltion Thanks Buddy! Yeah, ScalerFab makes some great stuff
you sound like a student of William Shatners school of oration ..... hard to listen to
Gee thanks - the trolls are alive today