The piece looks fantastic, the resin is stunning as is the burl. Just another fine work of art by "Sprague Woodturning". Just outstanding sir, outstanding indeed. Thanks for the post and your channel, one of the best on RUclips.🌿 ✨✨✨✨✨
All three of these players are absolutely awesome and beautiful. I like this one a lot but the blue one would be my favorite because I am partial to blue. Love them 💕
This gorgeous platter would make an awesome lazy Susan for the middle of a table. Consider turning a small stand for it or a future platter with the lazy Susan mechanism in embedded
I was also thinking it’s to late for this piece; but a gorgeous piece of art twirling in the middle of a table would really sell. Especially as gorgeous as these box elder burl type platters.
Thanks for the platter comparison pictures. I thought the stabilizing would give truer colour to the burl, but with the comparison, I now think the blue platter without stabilizer is a more interesting and striking piece. Thanks for sharing and for the detail of your videos.
A note to address your epoxy voids. As a retired iron worker. Welders often use a tool called. A needle gun. Remove the top to reveal the plunger. Great vibrator to use under your table. Note 2. Make sure the pieces are well secured and ready to rock & roll. This tool is a serious vibrator.
Once again you are amazing. I have seen a few other woodturner and I can truthfully say that I love your work more then any others I have seen so far. If I had a dream it would be to spend a week with you in your work shop making awesome things. Not to keep for myself but to just experience the joy of seeing something unique happen. As I approach my 70th year and failing health I could never get to visit you so I am restricted to watching your videos. For this I am so thankful to have come across you on you tube. May you be abundantly blessed in your creative world as well as your health and your family life. You are one awesome man.
I have 1 suggestion you can try if you like. While drying your wood in the toaster oven, when it begins to smoke and creates moisture, you can prop the toaster door open about 1/16 to 1/4 inch to allow moisture to escape which stops the moisture from sitting in and building up inside the over! I’ve done this and it dries a lot faster. Just a suggestion anyhow! I absolutely love the “blue resin” I never get tired of seeing you use it! I absolutely love your work and channel 👏👏👏👏👏
Many decades ago my tutor told me that, in order to be a good teacher, you need a thorough knowledge of the subject and the ability to impart that knowledge. I added the willingness to impart that knowledge. It’s so good of you to take the time to share your expertise 🌞
@@SpragueWoodturningI watch as my social life,my fun time.I am 71 and disabled,limited of outside activities I really enjoy what you do.I love the beautiful work you do.You make my every day better and brighter. THANK YOU SO VERY MUCH.Do you ever sell small works that seniors can afford ?even very imperfect work.I would love to have anything you make.How would one contact you?
From rotten pieces of wood to a thing of beauty. I love your work and as I am a person with no woodworking or epoxy knowledge, I thank you for an editorial that I can understand the process of how you created these beautiful results. 😌😂
Jim with those flaws in the finish I think you should send it to me for disposal. It's a beautiful piece and that colour goes great with the box elder. Hope you get the issues sorted out.
I do have a fireplace in the house but I'v heard the resin gives off toxic fumes when burned so that wouldn't be an option. Maybe just keep it in the shop as an example to aspire to do someday.
Nice video, I enjoyed that you show how to fix the little imperfections and the true nature of woodworking, its all about overcoming the obstacles to end up with a unique and beautiful product. I've learnt a lot from your videos, thank you.
That magenta piece was just CRAZY BEAUTIFUL 👌 🌷. I'd love to see magenta used alongside a really hot blue.💗💙 But keeping the swirling going. 👍 AMAZING!!!!!!!
Love you’re honest about the issues and hold your quality of work too high standards. Can’t wait to see it when you solve the finish problems. Beautiful craftsmanship as always.
Hé Jim, this peace looks on the television of a 3D print. Another stunning peace and i will look today to your other peace, who was not finished yet. I prusume that you make chapter 2 next week. Today it is Friday the 20th of september 2024. Time here: 19.48 hours Greetings from Gert from the Netherlands.
Jim what can I say you have such an ability to produce superb quality of workmanship it’s a pleasure to watch you create works of art all though I am a novice you inspire me to have a go thankyou
The process of learning is to manage our time , but we cannot manage our time we can only manage our priorities . Cheer , glad to see you in your initiatives to move on . Love brothers .
I enjoy watching you create your magic. They are beautiful. I have watched others working with resin and they sand 4 or 5 times and go up to (I think it was) 1200 grade sandpaper. Nick Zamitti is another great artist with wood and resin. You keep up the good work. Be blessed.
I like the blue, ghost and magenta, in that order. I like the different shades in the wood. I’d like to see a resin and burl project where the colour isn’t quite as opaque. Not wishy washy... but where more of the peaks and valleys in the wood are visible. As usual beautiful job! Stay safe.
Him Jim.. thanks for taking us on your journey of discovery with these burl and resin creations.. I agree with you that this latest is probably the best of the three, but it’s a close call; it is most definitely a really beautiful piece of art.. by the way, don’t you go listening to all those complainers; BLUE resin is the best, haa haa 😁
Thank you, Jim, for the great pieces you have made but even more for the information shared regarding the steps taken. The pieces are very eye-popping. Excellent!
Even with whatever finish issues you were having with this platter, it is beautiful. Always love watching your work and listening to you explain your process! Thank you. You really help a rookie turner such as myself.
I'm a huge fan of blue, too. I also love pearlescent finish. I discovered an acrylic paint additive, called iridescent medium, back in high school art class; it does the same thing, but for acrylic paints.
What a beautiful platter! I love the burl! It reminds me of coral. The magenta is perfect. I, too, love blue, but am glad you made this choice for a change. Love it! Thanks, Jim!
Nice to see someone using the tools for more than their official use.
Thanks 🙏
I live the combination of that magenta with the burls. The contrasts are stunning ❤❤❤❤❤❤
Thank you so much!
Beautiful color, beautiful burel, beautiful plater. Thank you for not using blue.
Lol, your the blue hater, haha. Thanks!
I love your explanations of how to use your various products. Thanks.
Thanks Vernon!
Oh my… that is beautiful! This magenta is very pretty with the Mother of Pearl
Thanks for watching!
The piece looks fantastic, the resin is stunning as is the burl. Just another fine work of art by "Sprague Woodturning". Just outstanding sir, outstanding indeed. Thanks for the post and your channel, one of the best on RUclips.🌿 ✨✨✨✨✨
Thank you very much!
All three of these players are absolutely awesome and beautiful. I like this one a lot but the blue one would be my favorite because I am partial to blue. Love them 💕
I’m a blue lover to, lol. Thanks
You have a wealth of knowledge on your craft and you must have invested heavily on your equipment. Thanks so much.
Yes I have! Probably 25k to make things related to the lathe. Thanks 😊
It’s been two months since your posting and according to my screen you have surpassed 26k subscribers. Congratulations 🎉🍾🎈
Thanks, been doing uploads every week, thanks for watching!
The magenta is indeed beautiful. With the yellow wood I think dark green would look good too.
Gramma Kat
Totally! Thanks 😊
this plate could be anything so awesome.
Thank you very much!
I love the blue with the mother of pearl, but I must say the magenta and mother of pearl is my absolute favorite! Great work Jim!! ❤
Agreed, need to do another one with the Magenta, thanks
Please do, that with the mother of pearl is gorgeous. Maybe with some blue with the same?
You are far more patient than I am. Nice job. I prefer the blue platter.
Trust me it was frustrating, lol. Thanks
I stabilized a lot of burls but I learned a lot from this video. Lot's of tips to make my projects better.
Awesome! Thanks so much!
Chrystal Purple Pursuasion, my favorite ❤
Thank you so much!
This gorgeous platter would make an awesome lazy Susan for the middle of a table. Consider turning a small stand for it or a future platter with the lazy Susan mechanism in embedded
A lazy susan project is a good idea, can’t do it to this platter tho, lol.
I was also thinking it’s to late for this piece; but a gorgeous piece of art twirling in the middle of a table would really sell. Especially as gorgeous as these box elder burl type platters.
Thanks for the platter comparison pictures. I thought the stabilizing would give truer colour to the burl, but with the comparison, I now think the blue platter without stabilizer is a more interesting and striking piece. Thanks for sharing and for the detail of your videos.
No problem, thanks for watching!
I like it and appreciate all the work you did to make it right! 😊
Thank you! 😊
Love this platter...the color is spot on. Would make a great center piece on my table
Yes! Thank you!
The finish brings out the pearl very good. Very pretty 💙💙💙💙💙💙💙💙
Thank you very much
Love the magenta!
Me too! Thanks 🙏
A note to address your epoxy voids. As a retired iron worker. Welders often use a tool called. A needle gun. Remove the top to reveal the plunger. Great vibrator to use under your table. Note 2. Make sure the pieces are well secured and ready to rock & roll. This tool is a serious vibrator.
Someone else suggested this too, thanks 🙏🏻
Your not the only RUclipsr that has compatibility issues with stabilizing resin...
Good, I hate being alone, haha. Thanks
Nice to meet another left handed wood turner.
We’re in short supply, lol. Thanks 🙏
Magical Magenta. Looks like a river that can only be seen from above.
Lots of map comments, thanks
Thank You Jim for sharing this beautiful looking platter
Thanks for watching!
nice blend of form and color very nice piece !
Thanks!
(Designer Epoxy)the colour looks wonderful. nightmare or not.. you did it :-)
Thank you!
Once again you are amazing. I have seen a few other woodturner and I can truthfully say that I love your work more then any others I have seen so far. If I had a dream it would be to spend a week with you in your work shop making awesome things. Not to keep for myself but to just experience the joy of seeing something unique happen. As I approach my 70th year and failing health I could never get to visit you so I am restricted to watching your videos. For this I am so thankful to have come across you on you tube. May you be abundantly blessed in your creative world as well as your health and your family life. You are one awesome man.
Wow, thank you very much! I really appreciate it!
I have 1 suggestion you can try if you like. While drying your wood in the toaster oven, when it begins to smoke and creates moisture, you can prop the toaster door open about 1/16 to 1/4 inch to allow moisture to escape which stops the moisture from sitting in and building up inside the over! I’ve done this and it dries a lot faster. Just a suggestion anyhow!
I absolutely love the “blue resin” I never get tired of seeing you use it! I absolutely love your work and channel 👏👏👏👏👏
Thanks for your suggestion, I will put it to use next time. Jim
Many decades ago my tutor told me that, in order to be a good teacher, you need a thorough knowledge of the subject and the ability to impart that knowledge. I added the willingness to impart that knowledge. It’s so good of you to take the time to share your expertise 🌞
It’s been a pleasure to pass on knowledge, RUclips has been so rewarding to me, thanks for watching!
@@SpragueWoodturningI watch as my social life,my fun time.I am 71 and disabled,limited of outside activities I really enjoy what you do.I love the beautiful work you do.You make my every day better and brighter. THANK YOU SO VERY MUCH.Do you ever sell small works that seniors can afford ?even very imperfect work.I would love to have anything you make.How would one contact you?
AGREE ❤️
From rotten pieces of wood to a thing of beauty. I love your work and as I am a person with no woodworking or epoxy knowledge,
I thank you for an editorial that I can understand the process of how you created these beautiful results. 😌😂
Thanks for watching!
Jim with those flaws in the finish I think you should send it to me for disposal. It's a beautiful piece and that colour goes great with the box elder. Hope you get the issues sorted out.
Do you plan on using it for firewood? I’m told resin burns well, 😜😜
I do have a fireplace in the house but I'v heard the resin gives off toxic fumes when burned so that wouldn't be an option. Maybe just keep it in the shop as an example to aspire to do someday.
Jim, Jim, Jim,,,,,,, you have created how I envision the parting of the Red Sea.
Great piece!!
It’s a pretty cool piece, thanks 🙏
JIM ITS GONA LOOK AWESOME .FROM DOUG
In the follow up video, I show this piece completed and ready for its new home. Thanks for watching!
The magenta pigment was the right choice! Awesome figure in the burl! Looks great Jim!!
Thanks Brad!
I would love to see a cherry bowl with a burnt edge and a very light magenta epoxy! BAM! did I just blow your mind🤯
Good combo. Thanks
So far it is beautiful. You keep topping yourself. Every piece is more spectacular than the previous one.
Thank you very much!
Your perfectionism is commendable!
Thanks 🙏
Nice video, I enjoyed that you show how to fix the little imperfections and the true nature of woodworking, its all about overcoming the obstacles to end up with a unique and beautiful product. I've learnt a lot from your videos, thank you.
That’s great! Thank you for watching!
I would love to see a cherry bowl with a burnt edge and a magenta epoxy that is just barely see-through. BAM! did I just blow your mind🤯
Good combo again. Thanks
@@SpragueWoodturning sorry, didn’t mean to send it twice.🥴 I would say I was losing my marbles, but the truth is, I lost them a long time ago.
That magenta piece was just CRAZY BEAUTIFUL 👌 🌷. I'd love to see magenta used alongside a really hot blue.💗💙 But keeping the swirling going. 👍 AMAZING!!!!!!!
Thank you! 😊
Your artistic side is awesome. Really injoy watching what you do!
Thanks 🙏
Jim another beauty......I like the magenta color. Thanks again for sharing.
It seems to be popular, thanks!
Love you’re honest about the issues and hold your quality of work too high standards. Can’t wait to see it when you solve the finish problems. Beautiful craftsmanship as always.
Thanks, still working on it, lol.
Thank you for always explaining everything so well.
Your welcome, thanks 🙏
It was interesting the process and struggles you had. In the end the platter bowl was still a successful project.
It’s still a really nice piece, thanks
One thing's for certain, wood crafting of any type is a never ending learning process. Very nice piece Jim.
It sure is, thanks 🙏
You said it, Jim. That is awesome. It is so hard to believe that the burl comes from a tree and not the ocean. Well done. 👍👍
It’s pretty awesome! Thanks
Hé Jim, this peace looks on the television of a 3D print. Another stunning peace and i will look today to your other peace, who was not finished yet. I prusume that you make chapter 2 next week.
Today it is Friday the 20th of september 2024.
Time here: 19.48 hours
Greetings from Gert from the Netherlands.
Thanks for watching!
Jim what can I say you have such an ability to produce superb quality of workmanship it’s a pleasure to watch you create works of art all though I am a novice you inspire me to have a go thankyou
Awesome! Thanks 🙏
Just love the pearl look keep them coming Jim. My wife and i just love watching your channel together it's amazing how talented you are
Awesome! Thanks 🙏
This is another masterpiece! I absolutely love it! That Boxelder Burl has no limits! Gorgeous work and talent!
Thank you so much 😀
Even for an experiment, truly beautiful 💖 a job well done! Thank you 🥰
Thanks for watching
The process of learning is to manage our time , but we cannot manage our time we can only manage our priorities . Cheer , glad to see you in your initiatives to move on . Love brothers .
Thanks 🙏
Love the plater ,this is my husband favorite color
Thanks 😊
I enjoy watching you create your magic. They are beautiful. I have watched others working with resin and they sand 4 or 5 times and go up to (I think it was) 1200 grade sandpaper. Nick Zamitti is another great artist with wood and resin. You keep up the good work. Be blessed.
Thanks Joy!
They are all fantastic but I am partial to the color red. Great job and I think it will end up perfect. Two thumbs up 👍 👍
Thanks Janice!
That's my favorite piece so far it's absolutely beautiful
Thanks, it’s a beaut!
Stunning platter Jim. I really like the color with the box elder. Even better than the blue.
It’s pretty cool! Thanks
As usual you blow me out of the water with what you do. Gorgeous, but still like the one with the ghost pigment in it.
Thanks 🙏
Wow, just wow. You should be very proud.
Thank you, I really appreciate it!
I like the blue, ghost and magenta, in that order. I like the different shades in the wood.
I’d like to see a resin and burl project where the colour isn’t quite as opaque. Not wishy washy... but where more of the peaks and valleys in the wood are visible. As usual beautiful job! Stay safe.
I agree, I will show it on a bowl in a video sometime in the future, thanks
burl wood is so pretty and goes so well with the magenta very nice
Thanks 😊
I like the blue one best. Vivid rich colour.
Thanks 🙏
Your channel is very informi am a new Turner and I've learned so much. I thank you, have an uber read with a new hobby
Welcome aboard! Thanks
love this even with the small blimishes
Thanks 😊
Him Jim.. thanks for taking us on your journey of discovery with these burl and resin creations.. I agree with you that this latest is probably the best of the three, but it’s a close call; it is most definitely a really beautiful piece of art.. by the way, don’t you go listening to all those complainers; BLUE resin is the best, haa haa 😁
So true! Thanks 🙏
Love it.learn some thing every video.my wife bought me my very own micro wave!!!
Thanks I even use mine to heat up finish sometimes, lol.
Thank you, Jim, for the great pieces you have made but even more for the information shared regarding the steps taken. The pieces are very eye-popping. Excellent!
Thanks Ray! I really appreciate it!
Tout simplement MAGNIFIQUE 👍👍👍
Thanks 🙏
It’s gorgeous. Obviously you’re a perfectionist. All the best from Bonnie Scotland.
Thanks 😊
Thank you Jim, you said it; fantastic.
If things ever stabilize on my side, I will absolutely pick up a piece of your art.
Thank you very much!
Jim very nice looks like a lava flow. We like it. Stay safe my friend
It sure does, thanks 🙏
Like the color. The burl looks amazing. Wish i could find some of that....lol. great job as usual.
Thanks Brent!
Great choice with the colours of the resin it really works beautifully.
Thanks 🙏
Wow Jim, that turned out beautiful. I love the color with the burl. As always, I love your videos. Thanks for all the great info.
Thanks Jean!
I dig your work. Me I haven't got the talent you have but wood working has always been an interest of mine.
Thanks!
The wood is so unique. Love colors!
It’s a very unique piece, thanks 😊
Even with whatever finish issues you were having with this platter, it is beautiful. Always love watching your work and listening to you explain your process! Thank you. You really help a rookie turner such as myself.
Great Darryn, glad to help!
Its very very pretty Jim! The combination of magenta and burl is just great! Thanks!
It’s a beauty! Thanks 🙏
Absolutely brilliant Jim 👏🏼👏🏼👏🏼
Thanks 🙏
I'm a huge fan of blue, too. I also love pearlescent finish. I discovered an acrylic paint additive, called iridescent medium, back in high school art class; it does the same thing, but for acrylic paints.
Thanks for the info, Jim
It's beautiful. I learned a lot from your commentary and watching you do this. Thank you
Thanks for watching!
What a beautiful platter! I love the burl! It reminds me of coral. The magenta is perfect. I, too, love blue, but am glad you made this choice for a change. Love it! Thanks, Jim!
Thank you so much!
Very nice will be looking forward to seeing the final finished platter.
Thanks 😊
Looks amazing I can see why it’s your favourite beautiful. 😁
Thanks 😊
The magenta is absolutely beautiful. Thank you for sharing.
Thanks for watching!
I do believe this is my favorite one yet. Thank you for sharing your thoughts and expertise.
Thanks for watching!
All 3 are beautiful.
Thanks 😊
The box elder burl is amazing, and the magenta is one of my favorite colors, such a beautiful pattern
Thank you very much!
You’re a perfectionist, Jim! Thanks for taking us on your learning process journey. Swirly, and pearly… full of peaks and valleys. Fascinating.
Thanks 🙏🏻
WOW! That turned out great!!! Love it. ❤️
Thanks 😊
Thanks for another great piece and a fun video. Til next week.....
Thanks 🙏
They are all amazing but if I had to pick it would be the blue!!
Thanks 🙏
looking great Jim can't wait to see it finished
Thanks Joe!
Regardless of the finish struggles, this has easily been one of my favorite pieces that you have done.
Me too, thanks 🙏
Awesome combo of colour and burl
Thanks 🙏
Love the pearl magenta with the burl, it is a beautiful combination.
I like it more than I thought I would, thanks 😊
Love your platters
Thank you very much!