7 MOST USEFUL INVENTIONS
HTML-код
- Опубликовано: 21 окт 2024
- 7 Homemade creative ideas
SUBSCRIBE-goo.gl/gYkBdJ
Other video!!!
Popular videos-goo.gl/KZCCXW
Awesome life hack -goo.gl/SCZiAr
3 Drill Machine Life Hacks You Should Know-goo.gl/7Ckdfh
How to make -goo.gl/g2Ph4P
Welcome to MR SUNY channel
Our channel include of guiding videos:
Life hack
-DIY
-How to make
-Awesome ideas
-Tips
You are interested in handiwork, craft or you just have nothing to do, haven't you? You have found the channel you really need. Here you can find lots of crafts, hand made items, and the main thing is that they all made of make-shifts and at the lowest cost!
You can criticise all you like. The man does it as crude as some of it is, it works. He is a doer.
>>>AMEN
You have a very fertile brain and your videos are never boring and your editing is great and keeps us viewers entertained for the whole video. Thanks for all your hard work on the show~!!
*The colour of the steel resulting from the oil-quenching is amazing*
धेरै धेरै राम्रो लाग्यो । भिडियोको लागि धन्यवाद ।
Mi amigo usted es único, tienes un talento súper especial, que DIOS TE BENDIGA Y TE DÉ MAS CONOCIMIENTO. Un abrazo grande desde Cuba.
OK! 'Fair point ie that some of these home-made tools are already mass-produced. But make enough of them and, in time no doubt, the savings would mount up.
Make any of them and the savings is there because it's probably much better quality using solid metal and you can do it for free instead of buying. You're also assuming everyone watching lives in a place where such mass produced tools are even available or can afford them.
Обжимка кабельного наконечника полная ерунда. После такой "опрессовки", даже при небольшом протекающем токе, соединение сгорит. Слишком маленькая площадь контакта пары жила-наконечник и усилие зажима.
That drill case made from a water jug has absolutely no other use than to say "because I fucking can" and I can respect that!
Sir,
Only 4 bearings is needed which will make the system smoother and faster
excellent ideas ... and how an sandpaper would be made to clean the wiring or mesh that the bed frame brings (sanding it) since it is very tight mesh
The wrench hanger and trolly were really clever!!
Cool I like good work and good ideas.
Good job
Огромное спасибо за потраченное время очень много полезных самоделок ещё раз спасибо от души
ЗдраАСсссЬьь!!! У меня кот рыгал и плакал когда увидел это разложение здравого смысла на атомы и выделения.
Я до сих пор не понял, вот та хрень что на превью за чем она нужна?
Do u patent ur designs? Are they free for commercial purposes?
Instead of watching all of this I turned it off and went outside in the dark to watch the grass grow, at least it was is more useful than anything in this vid.
First one was actually very useful, haven't watched the others yet but I'm hoping to enjoy them just as much.
Second one was pretty useless in my opinion, the third and fourth we're actually pretty nice. The fifth one is like a design I've done before and have seen pop up on cnc zone quite often so unless you consider professionals to be stupid then I'd recommend you rethink how you view the practical creativity of others.
And what's wrong with the sixth one (that awesome tool carrying case)? The seventh one, the sander, I already made myself because it works great for hand sanding irregulars surfaces.
Honestly the second one is the only one I have any problem with and even that could be repurposed for many useful purposes, I think you just have no idea how to do much in a shop or you've been handed everything on a silver platter and never faced any difficulty that needed creativity and perseverance to overcome.
@@lazyh-online4839 My grass is green.
@@Jpgundarun sounds good. Personally I feel like grass looks like a plasticy cheap carpet so we eliminated ours in favor of wood chips and practical plants such as tomatoes, cucumbers, melons, figs, peaches, apples, mangos, pineapples etc.
Just let the man do his thing=Geeze~!!
Это называется, а чтоб ты всю жизнь так наконечники обжимал....
А луком из абразивной бумаги подтирался🤣
Поел репчатого лука с битым стеклом
Trabajos ingeniosos y fáciles de hacer ,algunos útiles otros no tanto. Gracias
4:10 seems like an awful lot of work to make a wire crimp tool that you can buy for less then 10 usd.
The last one was dope👍🏼
Trabajos cencillos pero. De mucha utilidad felicitaciones
Most of his ideas are reinventing more complex versions of already existing ideas! Most are ridiculous
Я все ждал когда начнёт сверлить и отрезать сразу маркером. Это мастер конкурент пакистанским рукоблудам
В любой непонятной ситуации приваривай подшипник.
Срочно к Доктору
(я думаю вы поняли о каком докторе идёт речь)
Доктор Дью это наше все!
If someone pulled out that drill I would die laughing!
@Gordon Conner Didn't work. Required payment and wouldn't work
Use oil when cutting the glass, it will work Much better.
Build a spanner rack, then take all the spanners off and put them away somewhere else so you can fold the rack out of the way. Am I missing something here????????
Most useful said.........
No One Ever.
Bardzo świetny pomysł z tymi żeczami pozdrawiam twórcę tego filmiku i tego kanału na RUclips 👍👍👍👍
You got some pretty neat ideas.
WE HAVE THE CREATOR'S MIND, FANTASTIC VIDEO
Good work nice idea
Welding ball bearing!!!! My eyes are bleeding oh God No pls Noo !
Biggest sin you can do, you will take out the toughness made by the heat treatment they have, in the steel and essentially anneal them and therefore wreck them. Anyone can put up a video on RUclips, accuracy and safety are always comprised by amatuers.
AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAJAJAJAJAJAJAJAJAJJAJA!!!!!!
@@fernandoviera8583 I gather you liked my comment?
@@fernandoviera8583 tjdvsh
These are some of the most stupidest things... like ever... Omg
some people have waaayyyy too much time on their hands don't they.
@@Jpgundarun or have no access to these tools so simply make it themselves instead of complaining on RUclips and not accomplishing anything useful in their lives.
they are but.... theyre interesting to watch people make
А для чего тележка из подшипников? Для чего она должна кататься по трубам и уголкам??? Второй день голову ломаю, объясните мне кто-нибудь!!!
Great video!
handle each end could be better on pipe sanding thing
Had me at welded bearing
Just the fact that this guy is using a gigantic tipped marker, instead of a scribe, already shows he doesn't know what he is doing.
90% of this is pointless, but those are some nice welds though.
Una forma practica y util de cortar botellas y frascos
Good trick idea to easier work
Nice video,thanks :)
Buen video pero una pregunta, para qué sirve ese invento de la carátula? El de los rodamientos..
Me pregunto lo mismo....
6:20 I liked that idea it saved me lots of money. Thanks
What did you use this for?
I used to think you are McGyver until I met "Ax Creates"
Bonjour,
Tu devrais investir dans une foreuse colonne. Ton travail est vraiment très bien fait. Tu es précis et méticuleux. Bravo!!
Все видео очень красное. Цветокоррекция дальтоников?? А нет, стоп, простите!! Это кровь иидет
У меня от конистры 2й день понос😁
А я на "херне" для ключей чуть-чуть со смеха не обоссался🤣🤣🤣 где их хранить, когда она сложена??? 😂😂😂😂😂
Keine ganz schlechte Idee, aber wie oft hast du schon mit irgendetwas von der falschen Seite gegen den Schraubenschlüssel halter gehaun ? ..klimper.. Aber vielleicht hilft noch nen Magnet ? 🤔
Todos muy buenos, la placa con rodamientos me gustó para adaptarla en un taladro de banco.
Woowww... supper.... ❤️😁👍🤝 can you tell me it's tool equipments name please...... ???? 🤨😊🤔
After watching many drill hole made can I make a suggestion, try showing a centre punch mark, then you would know what you are doing!!!!!
I don't bother unless I need the extra precision, kind of pointless to wear out a tool that I'm not needing in the moment
Не понял.Для чего такая коретка??? САНЯ объясни пожалуйста!
You can safely throw the worx in the garbage can where it belongs, it has a shitty chuck and the batteries will die with a year or so, or it’s charger will go belly up.
The most useful channel in RUclips. Greatings from Brazil!
Don't you need to clean the metal before welding?
Me en canta estos video para tener muchos conocimiento y aprender de esos video
INCREDIBLE!!!!!!!!!
These ideas are already out ther.....i cant see any useful yet. If i build these for the heck of it then id be stuck w alot of useless tools, but fabrication is more on my interest so thats why i havent found much use yet. I hope ill be seeing some fabrication ideas soon. Still fun to watch.
Nice video broo, each one of you has few people to know so many useful and interesting things to do
Good and useful Idea's thanks for sharing.
With 💗 from India
Ya nadie usa el arco con sierra manual?
Gracias por compartir.
Yo
nice sharing sir
Nice to see your face for once
!
Your videos are really great!
Very intersting and informative. Thanks
Nice invention
Great work. 👍
Good idea
I love the sandpaper saw
The WORST part of these videos is the music. Almost had to cut this one off. Than God for volume controls.
I'd rather listen to the sound of grinding metal and drills lol
@@DixieDee Hey you can't use that flag~Peelosi and the PC Police have your number now~!😁
Nice try but there was nothing useful about any of them. I'm still trying to work out why anyone would want to hang their spanners from a post like that.
Excelente canal muy necesario me a ayudado mucho, Bendiciones colega
To make all those useless things, you need to spend a lot of money.
Wie geil er irgendwelche 3€ Werkzeuge in schrottig nachbaut.
Und Holz mit der Flex abschleift...
Meinst du das schlecht oder gut?
@@martingerstmayr1775 er meint das ironisch
Very nice job
Nice good job
Just because you can doesn’t mean you should.
Bonjour. Très interessant mais dommage qu'il ne donne aucune explication, dimension ou mesure ! S'il pouvait nous les envoyer par message privé, ce serait super ! Merci.
Which camera do you use sir..?
Please reply sir 🙏
Just use whatever camera is available, there is no purpose in answering that question.
The reason they sell tools is so you have time to get some work done.
Puedes hacer un Atril o burro o rack para transportar vidrios en una pickup. podrias hacerla?
You are amazing excellent job
آفرین.bravo
In the 1st I am trying to figure out what the "Invention" was. Glass bottles, wood, vases and glass cutters have been around forever. Maybe you grew up Amish or something.
Good job ‘ Mr Sunny
7 ways to waste your time instead of spending a few dollars to buy a proper tool and use your time to do something productive
Poor people sure do love them some angle griders and black markers.
Кто нибудь срочно вызовите доктора, доктора Дью.
what about changing the title to 7 WAYS TO WASTE YOUR TIME
I think that his things is roughy and ugly
Всё умеет но тески заводские? а за видео спасибо интересно.
Maravilhoso, parabéns!
Very good work
Mate, you have too much time on your hands.... your vid should be titled *How to make stuff you could just buy for next to nothing* or *How to use tools the wrong way*
Okeh
Legit and useful
At 7:00, instead of could unicel be a sponge ?; Greetings from Mexico.
👏👏👏BRILLANTES IDEAS!!!FELICITACIONES!!!
Thank you good ideas!
Genius!!!! Congratulations!!!!
For any one that doesn't want to watch they basically take everyday items and either remakes them overly complicated or pointless. A folding spanner holder that you have to remove the spanners to fold 🙄