Good day to you! I am a grandpa rider on HONDA motorcycle from Japan. Enjoying camping ,touring and upload video. Your boat fishing video is so nice! Awesome! Full supported ! Have a nice day my friend!
I love the way you made your modifications for your rubber boat it's looked so comfortable... Thanks for the idea you had shared, actually I'm planning to buy a trolling motor for my rubber boat too, that's why I keep on searching to gather more idea on how to handle it
I have same boat as you and I keep mine inflated and Rachet strap mine on the roof of my sadan. Little heavy though because I installed 1/4" plywood over the slats that comes with boat. Looking to get rolling wheels that attach to roof so I can roll boat on and off car.
Good ideas! Thx! I just saw another guy. He added cut foam noodles to each pole on motor mount bars. I think he used heavier electric motor. He also bought a solar panel with enough output to replenish battery as he fished, I thought those 2 ideas were good.
How's you attach the wheels to your motor mount? I'm has intex excirsion 5 now, I did some modification. I create dolly for my boat. I'm also split my flooring 2 piece to easy transport. I will love to get H grove for my flooring join. Thank you. Great video 👍
@@jaaebeeee I haven't measured its speed. I would guess 2mph tops. I just use it to go around the shoreline of the lake, or maybe do some trolling. Not trying to get anywhere fast.
3:00 great idea to wheel it down to the ramp using a secondary motor mount etc. I would like to see how you attached the wheels to it & did you use anything at the opposite end of the boat to lift it up a little easier than the standard handle?
That was done on purpose, when I used the TM with my inflatable pontoon boat. I prefer it backwards when used on that boat. Forgot to switch it back around for this trip, and didn't have a screwdriver to fix it in the field.
I can't tell in the video, are you using the included floor also with the slats? Love the video! Definitely want to copy just about everything you've done to mine now
I see that you are using a 30 in shaft motor. Any problems with the shorter shaft? Intex recommends 36 inch shaft motor. I was looking at the Newport Vessels 46 lb thrust with the 30 in shaft. They said it would work.
I use the 30" shaft without any issues, it pushes the boat fine. I have this trolling motor first for use in my inflatable pontoon boat (see my other videos), so I tried it with the Mariner and it worked. Longer might be better, but I can't confirm.
I've got a few questions about your setup here, if you don't mind my asking: How well does the 30 lbs. Endura work? Would you suggest a larger one? 55 lbs.? What size (AH) battery are you using, and what kind of runtime did you manage? Are you still using this rig? Have you made any changes? What would you do differently knowing what you do now? Do you think you could add a second seat and passenger comfortably, considering space, battery life and trolling motor power, etc.? Thanks for the video and the cool idea. I'm considering a similar build, also using a Mariner 4 and electric trolling motor (Minn Kota Traxxis 55?), using your design ideas as a starting point.
If you look at my other videos, you'll see my red inflatable pontoon boat - the 30lb Endura is ideal for that boat, so I just re-use it for this raft. It won't win any races, but I'm only using it to slowly meander around the shoreline of a 65 acre lake. I never have a need to get somewhere quickly, so no need for a larger motor. I have had this rig out a few times with two people, and the 30lb motor had enough power to move us about. My battery is a 40ah AGM battery meant for use in the mobile audio world. It came with the motor (I bought them used) and it worked well enough that I just keep using it. I do use a pulse-width modulator between the battery and motor to maximize battery life. A 55lb motor would be nice, as long as the back end of the boat can handle the weight. The nice thing about small motors is they use less power. However, if you were full with two people and lots of gear, trying to get back to the boat ramp against a strong headwind, having that extra power might be nice. I haven't run into that condition myself. I wish I didn't have to cut my one-piece floor in half, but my minivan was totaled and I didn't use this rig for 1.5 years due to no way to transport it. By cutting the floor in half, I can get everything into my Toyota sedan, so I'm back in business, and the H-channel idea does provide good stability at the butt joint where the two wood floor pieces meet, but I just wish I didn't have to cut it. I haven't used this rig since making this video. It hangs from the ceiling in my garage, getting no love. I usually fish by myself and just really prefer my one-man pontoon. And I just bought a float tube for smaller lakes. I do have one other video about my Mariner setup - it is approaching 300,000 views - if you want to see how much room there is. By keeping the battery, small tackle box and small cooler below the sliding tray in the middle of the boat, I feel like both passengers have ample foot room. The drink holder tray that I have mounted to the side of the seat does interfere with the rod storage if the front passenger tries to spin around and face the back. But that passenger can carefully move things around to make it work. Good luck with your build!
@@ndettwiler Thanks for the details! I'm encouraged by your results. It sounds like a 30 lbs. trolling motor is adequate, so I'd imagine a 55 lbs. model should be more than sufficient. I already own a (relatively cheap) fold-up Haul Master trailer from Harbor Freight (~$300), and plan to use it for transporting the M4 already inflated with the proposed custom flooring and other decking/chairs inside, so that it merely needs to be lifted off the trailer and set in the water at the lake-I'm fortunate that way in that I can keep the floorboard as a single, solid piece. I've found the Haul Master trailer to be especially useful; hauling furniture, leaves and other yard debris, and now, potentially hauling the boat. :) Might be something worth looking into yourself! Thanks for the advice, much appreciated.
@@ndettwiler I've got a small sedan, like yourself-a Hyundai Elantra. The small trailers from Harbor Freight are easily towable with a small car, and a hitch kit for yours would run maybe $125. You might want to look into it, it's a great solution for those of us who occasionally want or need a trailer or truck, but otherwise get by with a car!
@@ndettwiler I must be dense...thank you so much that is a life saver. Seen a couple of your videos, particularly found the mistakes were made video amusing. I would do something like that myself with the trolling motor.
Action camera. I mount a camera (like a GoPro) on a selfie stick and jam the handle into the pipe. Gets a cool up-high shot down the length of the boat.
Inflating the keel in this boat is a must. It helps provide the necessary structure for the hard floor, and helps the boat track straight. I once initially forgot to inflate it, and wondered why the boat was so sluggish in the water. Instantly cured that problem by remembering to inflate it.
@@ndettwilerOk thanks for your reply. Has it got a V shape type keel at the front. What I mean by that is its not a flat bottom inflatable like some Intex boats are?
I used 1" Schedule 40 PVC for the long horizontal white pipe, terminated on each end with a 1" Schedule 40 PVC 4-way tee. Flat bungee cords run through each tee and are secured to the boat. I cut up a 48" piece of Scotty Slide Track and attached with screws to the top of the horizontal white pipe.
Enjoyed your morning fishing excursion with a nice setup for Intex Mariner 4! It looked so peaceful and pleasant. I am going to buy an Intex Mariner 4 from Amazon. Can I ask your advice about the the electric trolling motor and related rechargeable battery? Thank you in advance!
My trolling motor is a Minn Kota 30lb thrust 30" shaft Endura C2. My battery is a 40ah AGM normally used in the mobile audio industry. It was included with the motor when I bought them used, about 5 years ago.
I bought the Mariner 4 for ~$180 shipped. It normally drops to this price a few times per year from various sources, although there is currently a shortage and the prices have skyrocketed. The seats were ~$25 each from Academy Sports. The swivels for each seat were ~$7 each. The seat posts were probably around $20 each (can't remember exactly). I think my plywood for the floor (and the sliding shelf) was ~$35. All of that PVC was probably ~$40. The Intex motor mount was around $20. The Scotty glue-on pad which holds the tranducer was ~$10. There's probably another $20 in hardware for the seat posts and the transducer mount. Hope that helps!
I covered that in the video. I mainly use my inflatable pontoon with a hands-free steering solution, so I'm able to turn the head of the TM around, which helps keep it out of the way. But I forgot to change it back before this trip, and didn't have a screwdriver to do it once I realized during launch. Dumb mistake.
I feel very comfortable and safe in it, on small lakes. Haven't taken it on anything more. And I prefer to sit while I fish, so I haven't tested the stability of standing in it much.
keep us posting when you test it the h channel with standing on the boat? i could not buy it in canada so i was thinking probably i just cut small playwood and stick in on one end and make another one on the other, so when put together it will perform like h channel but stronger and permanent, what do you think?
Mine is a VMax CT-1000 AGM deep cycle battery. It is a 40ah 12-volt battery. Duration depends on usage, but I use a pulse-width modulator to maximize its efficiency.
Mine had a small pinhole right up against the red & black rock guard that runs around the perimeter of the boat. It caused one of the four chambers to slowly lose air. It came that way, out of the box, so I filed a warranty claim.
Hi there, thanks for the video. It is really great. I think this is the perfect boat for my 7 year old and me to start fishing. Are any of those accessories shown available for sale anywhere? Ready to go? Is it ok to fish standing?
I personally don't fish standing. Most of my fishing is done in my one-man pontoon boat, so I have gotten used to fishing while seated. I'm sure you could stand in this boat if you add the wood floor. I'm a DIYer who likes to gather parts and make my own solutions, so the accessories you see here are not off-the-shelf ready to be installed, sorry.
That's a DIY battery pack made from a dry box. I used a 12 volt deer feeder battery, 7 amp hours I think, and added the outlet ports and switch inside the box. I also use this battery pack for my Garmin fish finder, and to power/charge my action cameras.
Yep! Mistakes were made! I had modified the motor to reverse the handle direction because it works better that way with another boat of mine, and I forgot to switch it back for this outing, and I didn't have a screwdriver.
The wood floor is in two pieces, and those pieces fit in the back seat of my sedan, standing on edge while resting on the back seat floor. The deflated boat is rolled up and transported in the trunk of my sedan. When I had a one-piece floor (before I cut it in half), I could not transport this boat after my minivan was totaled.
Good day to you!
I am a grandpa rider on HONDA motorcycle from Japan.
Enjoying camping ,touring and upload video.
Your boat fishing video is so nice!
Awesome!
Full supported !
Have a nice day my friend!
Awesome! Just planning my mods on my new Seahawk 4. You have some great practical add ons here. Will keep this in mind. Thanks!
you have by far the best boat mods I've seen on youtube. they are really engenius
Step by step assembly is a very informative way. Kudos!
WOW 3:30
I have a mariner 4 with a wood floor too, but I used a lock and door hinge.
I love the H channel Idea
Did you put the hinge on the top or bottom of the floor? Like facing up or down?
@@Jon-Hamersky-Shooting up
@@Jon-Hamersky-Shooting go watch my video
@@Jon-Hamersky-Shooting ruclips.net/video/EAGVdzhr0bs/видео.html&lc=z234fvupylm5dxtob04t1aokg2a0d1p2igilq2eseiq2bk0h00410.1624683710321695&ab_channel=TrevorDFrancisTrevorDFrancis
@@TrevorsCrabs Will do!
I love the way you made your modifications for your rubber boat it's looked so comfortable... Thanks for the idea you had shared, actually I'm planning to buy a trolling motor for my rubber boat too, that's why I keep on searching to gather more idea on how to handle it
I enjoyed the video. Would be nice to include parts you used and links, like a swivel chair
Ý tưởng của bạn rất tuyệt vời! là ra nhiều chức năng và công dụng! rất thoải mái khi đi câu cá! cảm ơn bạn đã chia sẽ ý tưởng hay!
Many good ideas, thanks from an Excursion 5 owner.
I have same boat as you and I keep mine inflated and Rachet strap mine on the roof of my sadan. Little heavy though because I installed 1/4" plywood over the slats that comes with boat. Looking to get rolling wheels that attach to roof so I can roll boat on and off car.
Could attach the h Chanel to one of the floor halfs. Finishing nails would hold it along with a little wood glue
Smart! It would make assembly a lot easier if the h channel was already attached to one side. Thanks!
Good ideas! Thx! I just saw another guy. He added cut foam noodles to each pole on motor mount bars. I think he used heavier electric motor. He also bought a solar panel with enough output to replenish battery as he fished, I thought those 2 ideas were good.
Great tip!
Smart idea with the H channel! Thanks
Nice Job with just a few easily correctable mistakes but still a great set up and don't forget your oars. Peace and Tight Lines
Thank you!
I wanted a link to where to buy the boat items, such as the rod holder, there is nothing here on Brasil
I made the rod holders from PVC pipe fittings. Hope that helps.
Nice video! Fish on! 🐟
Nice setup! I would keep the paddles with you incase the motor gives out
That's the plan! They're disassembled in a bag in the front of the boat.
How's you attach the wheels to your motor mount? I'm has intex excirsion 5 now, I did some modification. I create dolly for my boat. I'm also split my flooring 2 piece to easy transport. I will love to get H grove for my flooring join. Thank you.
Great video 👍
I attached square tubing to the motor mount, and drilled holes for an axle through the tubing.
how much thrust is your trolling motor?
30 pounds
@@ndettwiler how fast is it? i just got a mariner 4 with a 40lb but i'm thinking of gettimg the 55 instead for more speed
@@jaaebeeee I haven't measured its speed. I would guess 2mph tops. I just use it to go around the shoreline of the lake, or maybe do some trolling. Not trying to get anywhere fast.
@@jaaebeeee 40 is good enough. Pushes the m4 well.
Great video man. I have a boat similar to this. I used the excursion 5 though. I used finished 3/4 plywood.
How did you mount your fish finder and transducer?
Sounds great!
See my video titled "Intex Mariner 4 Bass Boat Modifications"
great video.... loved you were willing to admit the part was actually in your carry case. That is something I would do...
Thanks! It was certainly a learning moment. I got frustrated and didn't think clearly.
Los portacañas de PVC qué medida son los los tubos de PVC qué medida son
Los tubos de PVC arriba está el riel para accesorios el tornillo que trae abajo de los portacañas para deslizarse donde los consigo
3:00 great idea to wheel it down to the ramp using a secondary motor mount etc. I would like to see how you attached the wheels to it & did you use anything at the opposite end of the boat to lift it up a little easier than the standard handle?
Hi Mark - I did lift only by the built-in handle. I'll see if I can share a photo of the transport wheel.
imgur.com/a/LyC8aYu
@@ndettwiler Hello Neil, thanks for your reply. Ok & yes please I look forward to you sharing it 😊
@@ndettwilerThank you Neil 😊 🙏
@@ndettwiler What size are the wheels please, diameter etc? Thank you.
El tubo de pvc de que medida tambien los coples y t
when you assembled the trolling motor you put the head on backwards the prop goes opposite the handle lol!
That was done on purpose, when I used the TM with my inflatable pontoon boat. I prefer it backwards when used on that boat. Forgot to switch it back around for this trip, and didn't have a screwdriver to fix it in the field.
I cut my floor into 3 pieces and attached 36 " piano hinges. Works great and takes up less room in the car.
Did you put the hinges facing the bottom of the boat or facing up?
@@Jon-Hamersky-Shooting up.
Do You use the original floor also at the same time or only plywood floor?
I ask couse many videos user use them at the same time.
Great job !!!
how do you protect the plywood with? can you provide the link of the paint or sealer you are using?
Thompson's WaterSeal TH.024101-16 Multi-Surface Waterproofer, Clear, 1 Gallon a.co/d/0I3IwMV
@@ndettwiler Thanks a lot
welldone uncle 😎👌
Did the Transducer mount came with the boat? I just ordered the intex excursion 5 but i dont think it comes with a transducer mount.
No. I added this glue-on pad, and then did DIY components from there. www.amazon.com/Scotty-341-BK-Glue-Inflatable-Boats/dp/B004O0FRGO
bana çok şey öğrettin teşekkür ederim botun boyu kaç metre ve zemini tahtamı?
10'9"
Yes, I made a plywood floor, which you see me install in this video.
Buenas noches la tabla que esta encima de la lancha medidas en pulgadas
I can't tell in the video, are you using the included floor also with the slats?
Love the video! Definitely want to copy just about everything you've done to mine now
No, I made the plywood floor to use instead of the included floor.
How thick was your ply wood? Thanks :)
I see that you are using a 30 in shaft motor. Any problems with the shorter shaft? Intex recommends 36 inch shaft motor. I was looking at the Newport Vessels 46 lb thrust with the 30 in shaft. They said it would work.
I use the 30" shaft without any issues, it pushes the boat fine. I have this trolling motor first for use in my inflatable pontoon boat (see my other videos), so I tried it with the Mariner and it worked. Longer might be better, but I can't confirm.
I've got a few questions about your setup here, if you don't mind my asking:
How well does the 30 lbs. Endura work? Would you suggest a larger one? 55 lbs.?
What size (AH) battery are you using, and what kind of runtime did you manage?
Are you still using this rig? Have you made any changes?
What would you do differently knowing what you do now?
Do you think you could add a second seat and passenger comfortably, considering space, battery life and trolling motor power, etc.?
Thanks for the video and the cool idea. I'm considering a similar build, also using a Mariner 4 and electric trolling motor (Minn Kota Traxxis 55?), using your design ideas as a starting point.
If you look at my other videos, you'll see my red inflatable pontoon boat - the 30lb Endura is ideal for that boat, so I just re-use it for this raft. It won't win any races, but I'm only using it to slowly meander around the shoreline of a 65 acre lake. I never have a need to get somewhere quickly, so no need for a larger motor. I have had this rig out a few times with two people, and the 30lb motor had enough power to move us about. My battery is a 40ah AGM battery meant for use in the mobile audio world. It came with the motor (I bought them used) and it worked well enough that I just keep using it. I do use a pulse-width modulator between the battery and motor to maximize battery life. A 55lb motor would be nice, as long as the back end of the boat can handle the weight. The nice thing about small motors is they use less power. However, if you were full with two people and lots of gear, trying to get back to the boat ramp against a strong headwind, having that extra power might be nice. I haven't run into that condition myself.
I wish I didn't have to cut my one-piece floor in half, but my minivan was totaled and I didn't use this rig for 1.5 years due to no way to transport it. By cutting the floor in half, I can get everything into my Toyota sedan, so I'm back in business, and the H-channel idea does provide good stability at the butt joint where the two wood floor pieces meet, but I just wish I didn't have to cut it.
I haven't used this rig since making this video. It hangs from the ceiling in my garage, getting no love. I usually fish by myself and just really prefer my one-man pontoon. And I just bought a float tube for smaller lakes.
I do have one other video about my Mariner setup - it is approaching 300,000 views - if you want to see how much room there is. By keeping the battery, small tackle box and small cooler below the sliding tray in the middle of the boat, I feel like both passengers have ample foot room.
The drink holder tray that I have mounted to the side of the seat does interfere with the rod storage if the front passenger tries to spin around and face the back. But that passenger can carefully move things around to make it work.
Good luck with your build!
@@ndettwiler Thanks for the details! I'm encouraged by your results. It sounds like a 30 lbs. trolling motor is adequate, so I'd imagine a 55 lbs. model should be more than sufficient. I already own a (relatively cheap) fold-up Haul Master trailer from Harbor Freight (~$300), and plan to use it for transporting the M4 already inflated with the proposed custom flooring and other decking/chairs inside, so that it merely needs to be lifted off the trailer and set in the water at the lake-I'm fortunate that way in that I can keep the floorboard as a single, solid piece. I've found the Haul Master trailer to be especially useful; hauling furniture, leaves and other yard debris, and now, potentially hauling the boat. :) Might be something worth looking into yourself! Thanks for the advice, much appreciated.
@@JustinShidell You're welcome. I really need to buy myself a truck. Someday!
@@ndettwiler I've got a small sedan, like yourself-a Hyundai Elantra. The small trailers from Harbor Freight are easily towable with a small car, and a hitch kit for yours would run maybe $125. You might want to look into it, it's a great solution for those of us who occasionally want or need a trailer or truck, but otherwise get by with a car!
Tengo un bote marinero 4 con motor 55 lbs que velocidad alcanza en número 5 con 2 personas
Anyone know the name of that transport wheel? Looks pretty sturdy
It's my DIY solution. I used an Intex motor mount, a couple of wheels from Harbor Freight, and a steel rod for an axle.
Great vid. Did you use any sort of stabilizer between the two sections of floor?
Yes, I cover this at the @3:00 mark of the video.
@@ndettwiler I must be dense...thank you so much that is a life saver. Seen a couple of your videos, particularly found the mistakes were made video amusing. I would do something like that myself with the trolling motor.
Where is your lauching wheels?
I detached the front bracket (to which the wheels are attached) and left it on shore.
Great video been waiting for it to go on sale no way im paying 500 on Amazon!
can you please link the H channel, i cannot find it on amazon
amzn.to/3sFqsRX
What the vertical pipe next to the trolling motor for?
Action camera. I mount a camera (like a GoPro) on a selfie stick and jam the handle into the pipe. Gets a cool up-high shot down the length of the boat.
Forgot to ask you but did you notice any difference by inflating the keel?
Inflating the keel in this boat is a must. It helps provide the necessary structure for the hard floor, and helps the boat track straight. I once initially forgot to inflate it, and wondered why the boat was so sluggish in the water. Instantly cured that problem by remembering to inflate it.
@@ndettwilerOk thanks for your reply. Has it got a V shape type keel at the front.
What I mean by that is its not a flat bottom inflatable like some Intex boats are?
@@markweatherall7437 images.app.goo.gl/2hJZGEKSWfAUirKj7
How to make side rails?
I used 1" Schedule 40 PVC for the long horizontal white pipe, terminated on each end with a 1" Schedule 40 PVC 4-way tee. Flat bungee cords run through each tee and are secured to the boat. I cut up a 48" piece of Scotty Slide Track and attached with screws to the top of the horizontal white pipe.
looked a t a few of these boat owner videos and it seems great, question is how would they be on a larger Cdn Shield type lake?
My only experience is on small lakes, sorry.
Enjoyed your morning fishing excursion with a nice setup for Intex Mariner 4! It looked so peaceful and pleasant. I am going to buy an Intex Mariner 4 from Amazon. Can I ask your advice about the the electric trolling motor and related rechargeable battery? Thank you in advance!
My trolling motor is a Minn Kota 30lb thrust 30" shaft Endura C2. My battery is a 40ah AGM normally used in the mobile audio industry. It was included with the motor when I bought them used, about 5 years ago.
what brand of fishing rod holder
I made them out of PVC plumbing pieces.
@@ndettwiler thanks
Here you are!
Los acoples para el riel de accesorios
What is the cost of all this?
I bought the Mariner 4 for ~$180 shipped. It normally drops to this price a few times per year from various sources, although there is currently a shortage and the prices have skyrocketed. The seats were ~$25 each from Academy Sports. The swivels for each seat were ~$7 each. The seat posts were probably around $20 each (can't remember exactly). I think my plywood for the floor (and the sliding shelf) was ~$35. All of that PVC was probably ~$40. The Intex motor mount was around $20. The Scotty glue-on pad which holds the tranducer was ~$10. There's probably another $20 in hardware for the seat posts and the transducer mount. Hope that helps!
Thanks! I really want to build one of these!
I showed my wife your videos of your boat and now she doesn't think I'm crazy for wanting to turn an inflatable boat into my dream boat.
Why is your trolling motor backwards?
I covered that in the video. I mainly use my inflatable pontoon with a hands-free steering solution, so I'm able to turn the head of the TM around, which helps keep it out of the way. But I forgot to change it back before this trip, and didn't have a screwdriver to do it once I realized during launch. Dumb mistake.
Thanks for your video! Where did you get that H channel beam? Could you post the link for it? Thanks
www.amazon.com/Outwater-Plastic-Channel-Material-Moulding/dp/B07N4FY1PX
is this boat sturdy?
I feel very comfortable and safe in it, on small lakes. Haven't taken it on anything more. And I prefer to sit while I fish, so I haven't tested the stability of standing in it much.
keep us posting when you test it the h channel with standing on the boat? i could not buy it in canada so i was thinking probably i just cut small playwood and stick in on one end and make another one on the other, so when put together it will perform like h channel but stronger and permanent, what do you think?
How long does the battery stay and what is its specs?
Mine is a VMax CT-1000 AGM deep cycle battery. It is a 40ah 12-volt battery. Duration depends on usage, but I use a pulse-width modulator to maximize its efficiency.
Nice set up. You should try catfishing out of that rig.
Watch out for the catfish's spines.... they have been known to puncture inflatables.
great video!!!!
That looks great! Now if only they have a sale 😉
hi Niel
where to buy those accessories ie chair side rails? thanks!
amzn.to/3mT0PsN
Funny way of using the motor.
Explanation is in the video.
what is the thickens for plywood you use?
1/2 inch
Good luck 🙏🙏🙏
Salam dari Indonesia 👍
When you say defective what exactly was the issue with the boat
Mine had a small pinhole right up against the red & black rock guard that runs around the perimeter of the boat. It caused one of the four chambers to slowly lose air. It came that way, out of the box, so I filed a warranty claim.
54lb motor?
30lb
Hi there, thanks for the video. It is really great. I think this is the perfect boat for my 7 year old and me to start fishing. Are any of those accessories shown available for sale anywhere? Ready to go? Is it ok to fish standing?
I personally don't fish standing. Most of my fishing is done in my one-man pontoon boat, so I have gotten used to fishing while seated. I'm sure you could stand in this boat if you add the wood floor.
I'm a DIYer who likes to gather parts and make my own solutions, so the accessories you see here are not off-the-shelf ready to be installed, sorry.
You can definitely stand on this boat even with just the stock plastic board. The wood will only make it more stable!
What battery/charger are you using to power the electric pump?
That's a DIY battery pack made from a dry box. I used a 12 volt deer feeder battery, 7 amp hours I think, and added the outlet ports and switch inside the box. I also use this battery pack for my Garmin fish finder, and to power/charge my action cameras.
Are you still using floor from intex under plywood? Seen many ppl using them for some reason under plywood not sure why
No, I find it is not needed, and it would be waaaaay too heavy.
dude you really have the motor backwards.........handle to the front man!
Yep! Mistakes were made! I had modified the motor to reverse the handle direction because it works better that way with another boat of mine, and I forgot to switch it back for this outing, and I didn't have a screwdriver.
Lol I make plenty mistakes….forgetting to do a minor thing or not bring something. Lol. Human nature my friend.
El piso de madera si le entra agua se hincha la madera
GET A TARP TO LAY YOUR BOAT ON WHEN YOU ARE BLOWING IT UP!!
IT WILL ADD PROTECTION FROM THE ROCKS AND HARD GROUND
Thanks for the idea, Trevor.
How come your not wearing a life jacket that is a big mistake.
Hi Mom! 😄
😅
❤❤❤❤💯❤❤❤❤😉👌🎣🛎
Hey mate just wondering how you fit the boat in your car with the long piece of wood?
The wood floor is in two pieces, and those pieces fit in the back seat of my sedan, standing on edge while resting on the back seat floor. The deflated boat is rolled up and transported in the trunk of my sedan. When I had a one-piece floor (before I cut it in half), I could not transport this boat after my minivan was totaled.