WestMods not bad ! How much does going down this route cost roughly? I know the jenvey throttle bodies and ktec Ecu roughly costs like £2-3k is there much saving to be had with the gsxr carbs and m22 ecu ?
just stumbled across your channel. i recognize the volvo from the me facebook page. ben isnt it? good vids anyway and have subscribed to watch the rest.
awesome vlog of the install. Just bought a set of these, loom and omex 600 ecu for my phase 1. Really interested in how long the whole install took in total?
WestMods the set I've bought have come with a pre made up loom off a ph1 so hoping it shud just be a case of plug and play. I was wondering how they were gonna fit so your vids have helped solve alot of potential problems, much appreciated 👍 Have you had it mapped yet and had a read out for power and torque gains?
Sweet set up! track little rocket for sure!
That Volvo 💪💪
Great stuff mate that thing is gunna be a little bullet on track
What sort of power do you think it will make ?
+BIAWolf When they were on the F4R in our Volvo they made 185bhp on a dyno that standard 182s only ever make around 160 on, so a good 20bhp gain.
WestMods not bad ! How much does going down this route cost roughly? I know the jenvey throttle bodies and ktec Ecu roughly costs like £2-3k is there much saving to be had with the gsxr carbs and m22 ecu ?
+BIAWolf The throttle bodies and manifold were £760, the ME221 was £550 from memory, so yes much cheaper than Jenveys.
just stumbled across your channel. i recognize the volvo from the me facebook page. ben isnt it? good vids anyway and have subscribed to watch the rest.
Yes, it's Ben. Thanks for the sub 👍
awesome vlog of the install. Just bought a set of these, loom and omex 600 ecu for my phase 1. Really interested in how long the whole install took in total?
We did it over a couple of days, but the loom was already done from when they were on the F4R in our Volvo, so that saved a bit of time.
WestMods the set I've bought have come with a pre made up loom off a ph1 so hoping it shud just be a case of plug and play. I was wondering how they were gonna fit so your vids have helped solve alot of potential problems, much appreciated 👍 Have you had it mapped yet and had a read out for power and torque gains?
What steelies do you have on the Volvo? PCD, offset, size etc.?
+Samiur Rahman Shah they're Bullet Sixtys, in 15x9, offset ET15, PCD is 4x100.
What injectors are u running?
Me planning doing this on k4j/m high comp hybrid
We're using the stock ZX12R 330cc injectors.
WestMods just pig tailed the loom?
Did u have any issues on tune with dead time etc
We're using standalone management (Motorsport Electronics ME221) with it's own sub loom. It has no problems running them.