Definitely one of the best realistic test that I've seen on the 900 very well done I've watched quite a few videos on the 900 already and this by far is the best.
Bonjour à vous je me suis abonnée à la chaîne 👍 moi je suis français et je suis de la Bretagne Côtes-d'Armor département du 22 merci pour ce moment de partage 👍 a bientôt pour une nouvelle aventure
Appreciate all your testing on the new 900…..Please correct me if I’m wrong but it seems as though you might have accidentally changed the mode of your machine before swinging your coil over your targets…..From the beginning of your video and at 6:43, your Nox was in Field 1……then you did a noise cancel….then you pushed a few more buttons, then at around 6:57 the machine changed to Field 2, and that’s the mode you used to do your testing….The Modes on the 900 look to be the same as they were in the 800 (Park/Field 1 is tailored to high conductors, and Park/Field 2 tailored for low conductors)….. your higher conductors, like the big copper and the shilling would hit deeper in Park/Field 1, and your low conductor targets would be more discernible in Park/Field 2. What I’m also trying to figure out is how the new iron bias of the 900 (FE only) correlates to the older 800’s (F2 or FE iron bias)……the newer FE IB of the 900 may be a summation of the F2/FE IB filters we had access to on the 800….
capn dan you are definetely right,,does'nt take a genious to see that. Looks like he's denying it,,,but why?.....is there going to be a video showing how the 800 blows the 900 out the water with this test in the next few days or so? ( on field 1 obviously).
Very informative video bud , many thanks very helpful thought the numbers were a bit more jumpy compared with the 800 seemed to bounce about a lot . like the DP setting will be my choice i think , trial and error i guess'
I'm new to this channel, very interesting video, congrats. I'm really thinking to go for this md as well. Can i ask you please if you have ever tested the new Deus II ? have you may found differences between this one?
Very interesting test 👍🏻 just shows what difference the recovery speed makes. The Vicky shilling did you check the clod in all metal? Sounds like some iron masking the signal until you changed to DP pal
I can't help but feel Equinox have had people over. Build wise its definitely a massive improvement over the 800. But there again the 800 should never have been that way, for the money. Electronically is not better then the 800. Or many other as a matter of fact.
@Paul Martin all I can do is test it on my ground one of the signals was a bit strange I will adjust the settings just to see if its more responsive and thanks for subbing to my channel
If you lower the recovery, then you should swing slower ,we aways hunt it recovery 3 on our Roman hoard site but you need to do a 3 to 4 seconds swing ,just cheeses me off as I got my 800 2 months before the 900 came out ,I have used the CTX for 6 years but just had a major back operation so I went foe a 800 ,very impressed but it's built crap ,be lucky to get £600 for the nox and it less than a year old ,so will stick with it
Definitely one of the best realistic test that I've seen on the 900 very well done I've watched quite a few videos on the 900 already and this by far is the best.
Thank you very much!
Good afternoon friend I really liked your video you could put caption to make it easier for me to learn how to use the equipment
Just purchased the 900. I'll be paying attention. Take care.
Bonjour à vous je me suis abonnée à la chaîne 👍 moi je suis français et je suis de la Bretagne Côtes-d'Armor département du 22 merci pour ce moment de partage 👍 a bientôt pour une nouvelle aventure
DP all the way then, and I'm not to bothered about my Vicky shilling collection! Well done Adrian.
A very interesting test adrian, well done
Appreciate all your testing on the new 900…..Please correct me if I’m wrong but it seems as though you might have accidentally changed the mode of your machine before swinging your coil over your targets…..From the beginning of your video and at 6:43, your Nox was in Field 1……then you did a noise cancel….then you pushed a few more buttons, then at around 6:57 the machine changed to Field 2, and that’s the mode you used to do your testing….The Modes on the 900 look to be the same as they were in the 800 (Park/Field 1 is tailored to high conductors, and Park/Field 2 tailored for low conductors)….. your higher conductors, like the big copper and the shilling would hit deeper in Park/Field 1, and your low conductor targets would be more discernible in Park/Field 2.
What I’m also trying to figure out is how the new iron bias of the 900 (FE only) correlates to the older 800’s (F2 or FE iron bias)……the newer FE IB of the 900 may be a summation of the F2/FE IB filters we had access to on the 800….
Thanks for your comment I've just look back at my video I can't see that the mode changed
capn dan you are definetely right,,does'nt take a genious to see that. Looks like he's denying it,,,but why?.....is there going to be a video showing how the 800 blows the 900 out the water with this test in the next few days or so? ( on field 1 obviously).
What a sharp vision! Good point about Field 2👍
Many thanks for all your comments and all the new subs 🙏
Great video to watch very informative!
Food for thought I think I'm gonna try the dp tones next time I'm out. Not got a 15 coil till Xmas though
Thanks for your efforts and sharing
Respect to you and from Algeria
My pleasure
Abdelmajid teboun 😂😂😂😂
Very informative video bud , many thanks very helpful thought the numbers were a bit more jumpy compared with the 800 seemed to bounce about a lot . like the DP setting will be my choice i think , trial and error i guess'
I'm new to this channel, very interesting video, congrats. I'm really thinking to go for this md as well. Can i ask you please if you have ever tested the new Deus II ? have you may found differences between this one?
You could put the soil in plastic bag then just drop the bag in. Makes it easier to add and remove. Interested in 900 for gold, moved to Oz from UK.
Very interesting test 👍🏻 just shows what difference the recovery speed makes. The Vicky shilling did you check the clod in all metal? Sounds like some iron masking the signal until you changed to DP pal
Nice video matey. Just bought the 900 myself. So you would say the 15 inch coil is a bit deeper than the 11inch?
Yes extra 2 to 3 inche I think on the 15 inch coil
Good morning, Mate. Keep digging.
It's because I'm Brazilian there I can not understand if you put a caption will help a lot
What is DP tone?
Only use DP exclusively, just suits my ears.
Good info!
Big coil does it then !
I can't help but feel Equinox have had people over. Build wise its definitely a massive improvement over the 800. But there again the 800 should never have been that way, for the money. Electronically is not better then the 800. Or many other as a matter of fact.
different software and settings on the 900, which means its an improvement on the 800....
I must say a great improvement over the nox 800
Some videos have the 900 perform better
@Paul Martin all I can do is test it on my ground one of the signals was a bit strange I will adjust the settings just to see if its more responsive and thanks for subbing to my channel
How can you say that 900 has a faster processor far superior to the 800
Почему нет перевода на русский язык??🤔🙏
🤝👍
Maybe you're swinging too fast
Daniel not sure what was going on with the silver shilling but the rest of the targets were good maybe up the recovery would make it more stable
If you lower the recovery, then you should swing slower ,we aways hunt it recovery 3 on our Roman hoard site but you need to do a 3 to 4 seconds swing ,just cheeses me off as I got my 800 2 months before the 900 came out ,I have used the CTX for 6 years but just had a major back operation so I went foe a 800 ,very impressed but it's built crap ,be lucky to get £600 for the nox and it less than a year old ,so will stick with it
Ur vdi numbers are all over the place my 900 is way more stable
Never go by numbers ,ears only