350Z 2JZ BUILD BREAKDOWN
HTML-код
- Опубликовано: 26 авг 2024
- Intro to 2jz 350Z Swap
Check out my other 350z 2jz project videos below. Lots of great information for guy just starting out or ppl looking for solutions. Don't be afraid to a leave comment below and share your thoughts. Hit that Sub button and stay tunned!
• 350z 2JZ/PTE 6466 Gen2...
• 350Z 2jz first oil ch...
• 2jz 350Z turbo is Fina...
• 2JZ 350Z issues! discu...
• 350z clutch master cy...
/ 3duxrow4p5
#350zswap. #2jz. #777
Came from the Facebook. Super clean man. Proud of your work and I know you're proud of it too. I've turbo'd my built vq with a precision 6766. SUPER TIGHT. getting the tune in a couple weeks. Will be looking for more content from you!
Thank you more cool stuff is coming stay tuned buddy
Such a clean build
Clean build man, looks factory
Looks good my friend.
Came from the 350z/g35 group 🤘
I'm trying to plan my build out, do you have a parts list of what you used?
EBC brakes yellowstuff pads...BIG BIG difference from stock but fits the stock!!!
I will have to try them out
Yo kid why am I just seeing this now! Keep on shifting and drifting brother
Idk kid - come visit the shop sometime
@@StreetFabPerformance I gots to! I keep forgetting that we're not far from each other and frands be family bro! So glad to see you doing big things and taking those huge strides forward. Proud of you homie!
What exhaust manifold are you running? A parts list in the description would be nice. Im doing a build on a 06 G35 Cpe 6MT. Doing my ordering this week. All help would be great. Running collins as well.
It's a cx racing manifold. Massage me on Facebook I will try to help you out. Alex Aliyev.
I will make a video with a parts list
@@StreetFabPerformance thanks bro... i wasnt sure what aftermarket exhuast manifolds would fit.
Very nice and clean setup, congrats!!! Did you need to cut the firewall to fit the engine ?
No I did not. Thank you
So can I just mount the motor in install wiring harness, ecu and a basemap then the car will start? Not drive ofc but start up and idle
Yes you can
so clean
Sick bro
I’m assuming you probably did all the work yourself I’m thinking, how much did it cost to do the whole setup bro?
Yes I did. About 20k in swap
Hi bro, link swap kit 2jz engine in 350z?
Is that a custom turbo manifold? My parents and I are building a 2jz 350z In memory of my little bro and this is super clean lol I'll be referencing your page a lot as we go man good work
Thanks man. Good luck to you thats super cool. Reach out if you need anything
I need to know how to adapt the VQ throttle body
You can get the CNC cut flanges and get them welded how you want it to be positioned. I can get you the contact if you would like where to get them.
@@StreetFabPerformance yes please if you still have the contact
Love the build!!! Did you use a 350z transmission? Do you also have that link for the engine mount kit? Thanks!
Thank you! Yes you can use 350z transmission. Check out Collins adapter kit.
I couldn’t watch the whole vid,I wanna 2j swap my 350Z,I’ve got rb kit and some one of one wheels and shi but,could you keep ac? Cause Mine is a daily so I kinda need ac
Yes you can keet ac. I have mine.
How much did the engine and whole build cost?
Ran about 24k
Did I see this at IFO in West Salem? 👀
Probably. Our shop street fab performance is by drag way 42.
@@StreetFabPerformance then I definitely saw it back in June.
She's naastyyyy.
@@ajmontanastacks thank you. Yea I was at that event.
Very clean Z man. Are you planning on changing the head and taillights for the HR ones?
Thank you. Yes I would like to replace them. They look much better.
Love the swap if u don't mind me asking how much dose it cost to have that done really want to do that to my 05 350z
To do it right it would run 15 to 20k with all brand parts no shortcuts. That's plus dyno time.
Hi what’s the thread size of the iat sensor on that manifold? Is it direct fit or have to use adapter or weld on bung?
Im sorry what sensor? Intake temp?
Would swapping a 1jz be easier, cheaper, harder? What is your opinion on a 1j?
Its a cheaper motor. Still a great choice.
I want to get a 350z and drop a 2jz with a larger turbo...if you dont mind me asking. In total everything you have ever done do you knoe the pricing
25k
Is this a 2jz-gte or 2jz-ge?
Gte
Do you build it yourself ?
Yes
How close is the back on the enging to the firewall?
3 inch or so
Hey man i saw your car on facebook, just wanted to ask what are the full specs on the turbo? Is it t4?
It's a pt 6466 ball bearing t4
where did u put the fans...im trying to do the same swap to my car
In front of ac condenser.
How much did the swap cost in to total? I’m planning the same swap on my 2003 z
Hard to say. I would have to add everything up to give you a good number. Maybe in the future I will make a video on that. Contact me on Facebook and I can help you out to make sure you get correct parts.
@@StreetFabPerformance nice setup. How i can contact u to ask u few questions if you dont mind. U have instagram
@@carlosalmonte6199 alexeyaliev is IG
Super nice build.where are from
Ohio
Looking good bud! How's the Collins adapter? Any issue so far with it? Did you get the non cut version?
Works great man. Not sure what no cut version is?
@@StreetFabPerformance as in the one without cutting the bell housing off or with the adapter that requires cutting the bell housing
@@Revoluzion oh yea I have the one without cutting worked great no issues
Hey man ion know that much about cars but is it possible to 2jz swap a 350z but also have an automatic transmission
Yes you can use auto transmission.
Awesome build! Are you able to keep your ac with this swap?
Yes
@@StreetFabPerformance Did you fix the cooling issue ?
@@kominh I'm working on that now stay tuned for a new video. Waiting for new parts to arrive
We have also purchased new equipment for the shop. Stay tune for that.
@@StreetFabPerformance will you do a v
Step by step swap video? Or is there a certain site or forum available?
What would this cost to get done by a shop
I can even imagine. If you bring it to me I can probably do it for half.
@@StreetFabPerformance not possible in Florida
If you doing it your self I can help you out as much as I can.
@@StreetFabPerformance I'm thinking about doing this swap by the end of the year, probably just gonna keep the engine stock for now and enjoy it as is. How much do you think it'll cost me in total? I have a ball park 6 to 8 grand is what I figured. All done myself
@@brycestjohn3907 what ECU will you be running? and do you want you original dash cluster to work? Will make a big difference in price. If you just strictly using all stock parts such as turbos, coils etc. You might be able to do 8 k.
Where are you based out of?
Cleveland ohio
If you were to sell this car how much would the selling price be?
Hard to say. I know no one will ever pay that was put into it. Why do you want to buy it?
Is there a cheap budget way to do this swap I only want 400 or 450 hp for now?
What is cheap?
Less than 7k
I do not believe you can get it done under 7 k
Thats usually right where the price line is but under 8500 or 8000 is more realistic
Hey Bro what ecu did you buy. How did you set it up to the 2jz???
I got Aem infinity 8 for the 350z plus a custom wire harness to make everything work.
Thx bro. App the info. So that replaces the factory ecu. So this ecu is universal or is it specific to the 2jz?
@@Exotic_Flash its universal to any engine but not to the car. You have to get the one specifically for the 350z.
The mishimoto Radiator is for 2jz or 350z ?
For the Z
@@StreetFabPerformance thank you
How much hp does it have
700hp at the tire but I'm going to the dyno shortly to make some adjustments
Bro one question how much is total cost do all ?
20k
Thankyou bro
I might have missed it but which transmission are you using?
Cdoo9
@garage build
how can you be able to swap in a 2j but you put cringy ass ricer stickers on the paint
What sticker?