@@KevinLyons-gn7eu It Wasn't Overwound, The Strike Latch Was Stuck In The Release Position And That's What Caused It To End Up In The Endless Loop I'm Pretty Sure A Doce Of Oil And Some Adjusting Is What Fixes It (That's What I Did When My Cuckoo Clock Had The Same Issue)
Sounds like the lifter is not dropping as it should thus the rack and snail (the counting mechanism) is unable to lock the striking mechanism. Probably some gummed up old oil on the lifter. That part should not be oiled. I imagine a cleaning and re oiling of the rest of the movement will fix that.
What a funny video. Those 2 high school girls had to figure out how to fix the chimes on their grandma's clock by moving the hands and shutting off the chimes.
That turning thing that moves left to right is called a pendulum it is where it connects to the escapement which moves the hand And if this happens go th the back of the clock and open the hatch And there should be a lead with a plastic ring tied pull it and call a repairman
The owner repaired it so probably the only way to repair it is oiling the gears @@KevinLyons-gn7eu because if it doesn't get a repair then it can either rust away
When i got my first clock, I wanted yo listen to the chime and i turned the minute hand. It displayed 10 o'clock and striked 37 time. I will try to explain the problem in a nutshell: A semi circle drop and will come back up with the strikes. The semi circle is hold by a pin wich lock it so it doesn't fall down immediately and it appears the pin got stuck by dust or something else. The problem can (normally) be fixed by turning the minute hand to the next hour. And also a quick information, NEVER TURN THE HANDS CONTER CLOCKWISE !!! This can force or break the conting pieces and your problem could be persistent and fixing it can be very expensive.
ima guess the next time it chimed at 1:15 it would have had the half past chime (2 verses of westminster chime) then would continue to strike and strike and strike
Clock reparist here, There is a lever that activates the wheights. Maybe make sure it’s not up or make sure … you just kinda made it worse. Make sure the worm gear is correct and the snail.
@@Zyphen4866 It has nothing to do with servicing and oiling. There is a small pin that stops the chimes and strike after they have completed for the given hour. That pin has broken, which is very common. Eventually it wears out but it is a simple and inexpensive repair by a technician. This is the cause of chimes "running away" as you put it.
IT IS FUNNY BECAUSE IT IS HOWARD MILLER GRANDFATHER CLOCK IT KEEPS CHIMING IT DOESN'T STOP 🛑
Isn’t that the clock from Toms midnight garden. “It never strikes that right hour” 😂😂😂😂😂
In situations like this you just put it on silent and call the repairman.
😂 makes sense to me!
Wow! This got popular. It’s fixed everyone. I have no idea how, but I’ve been to my Grandma’s many times since this. Thanks for your interest!!
It did that because it was overwound
How did you fix it?
Demember 31 2021
Oh right I should've known
@@BakerFamily123 why did it get overwound how did they fix it
@@KevinLyons-gn7eu It Wasn't Overwound, The Strike Latch Was Stuck In The Release Position And That's What Caused It To End Up In The Endless Loop
I'm Pretty Sure A Doce Of Oil And Some Adjusting Is What Fixes It
(That's What I Did When My Cuckoo Clock Had The Same Issue)
I must’ve counted 50 chimes.
Sounds like the lifter is not dropping as it should thus the rack and snail (the counting mechanism) is unable to lock the striking mechanism.
Probably some gummed up old oil on the lifter. That part should not be oiled. I imagine a cleaning and re oiling of the rest of the movement will fix that.
This is the worlds funniest clock ever
it's 100'o clock lol
And some people that had the same problem must've thought ghosts were doing this
Plot twist they are stuck in a time loop
We were, we just got back! What did we miss? 😂
My clock chimes 12 every hour
Yeah same I went to a 3-D it’s a small world and it was like 1 o’clock or something but it still show 12 o’clock
The pin has broken that stops the chime train after it chimes and strikes the correct hour. See a clock tech. It's a minor fix!
What a funny video. Those 2 high school girls had to figure out how to fix the chimes on their grandma's clock by moving the hands and shutting off the chimes.
They don't know about clocks so don't be mad at them
Thank you for thinking we’re young enough to be in high school! 😂
Same but mine is 1930 wall clock
It Struck 51 times.
December 27 2021
The snail gear is slipping of the gear that keeps the hour
Its the stopping pin on the gear. Its broke.
It's pretty simple, the clock is possesed and trying to call out to you
1:45 my grandfather clock did the same thing but it was a triple chime clock
Thats the same clock i have but its a
"Jonathan Modal" and the numbers were black instead of gold
When Big Ben Chimes 40 Times
That turning thing that moves left to right is called a pendulum it is where it connects to the escapement which moves the hand
And if this happens go th the back of the clock and open the hatch
And there should be a lead with a plastic ring tied pull it and call a repairman
How much would it even cost to repair the clock
@@KevinLyons-gn7eu these things are antique, they could range depending on the age and the countries knowledge of clocks
The owner repaired it so probably the only way to repair it is oiling the gears @@KevinLyons-gn7eu because if it doesn't get a repair then it can either rust away
It’s a ghost lol
I think the spring that hold the chime thing got broken
Big Ben chiming for birthday be like
dumb comment
When i got my first clock, I wanted yo listen to the chime and i turned the minute hand. It displayed 10 o'clock and striked 37 time.
I will try to explain the problem in a nutshell:
A semi circle drop and will come back up with the strikes. The semi circle is hold by a pin wich lock it so it doesn't fall down immediately and it appears the pin got stuck by dust or something else. The problem can (normally) be fixed by turning the minute hand to the next hour. And also a quick information, NEVER TURN THE HANDS CONTER CLOCKWISE !!! This can force or break the conting pieces and your problem could be persistent and fixing it can be very expensive.
How does it chime and keep on going without stopping.
Because the stop pin has broken it will not stop until the weight has dropped completely down to the bottom of the case.
The pin for the chime broke, or the part that stops the chime needs adjustment
ima guess the next time it chimed at 1:15 it would have had the half past chime (2 verses of westminster chime) then would continue to strike and strike and strike
I found out the stopper is broken, but I think they found a lever to stop it
Get the rack on the left side of the movement back in place. It probably got out of place or it’s stuck.
IM CRAZY!
Clock reparist here,
There is a lever that activates the wheights. Maybe make sure it’s not up or make sure … you just kinda made it worse. Make sure the worm gear is correct and the snail.
0:49 it's called a pendulum
0:46
you have to lock it
I think you're in the Twilight Zone
It won't stop chiming because the gears that control the chime are worn out
Oh nooooo
Try and remove the weights ladies. The pendulum doesn’t stop
I know what it is.
behind the clock face there is a set of teeth that count the chime maybe stuck best to call someone.
Too much energy
i beleive at 3 oclock there is a silent lever you can move
oh no...
Y'all know nothing about the clock granny is gonna kick yo ass🤣
This same problem with our grandfather clock
Yep same with mine we have one too and it has the same problem
Thats so creepy!! lolol!
The girl does not know how to hand the clock hands.
Did you fix it
It fixed itself 👻
I think the striking gear is stuck so It thinks it's chiming more than 12
One of the mechanical pieces has either fallen out of place
Isaak Duncan no, its just a runaway, usually if you don't keep your clock oiled this can happen
This clock Has Strike pendulum
@@Zyphen4866 It has nothing to do with servicing and oiling. There is a small pin that stops the chimes and strike after they have completed for the given hour. That pin has broken, which is very common. Eventually it wears out but it is a simple and inexpensive repair by a technician. This is the cause of chimes "running away" as you put it.
Wow! You don't even know how lucky you are that you didn't break anything,. You NEVER do any of the things you guys did to stop the chiming. 🤯🤯🤯🤯🤯🤯🤯🤯
clP
I think it's a grandmother clock
@Darrell Anderson there is such thing as grandmother clocks, grandmother clocks r thiner than grandfather clocks
It’s called vecna
Ha ha ha ha ha ha ha😊
Sad.
must be 1000:00
I know what's wrong its the rack it drop in the wrong place
DO NOT silence a clock while it is chiming
Yeah it's not good
in situations like this it will probably be fine…
Its cursed
Its haunted
Strike Pendulum is seen on this clock
The pendulum has nothing to do with the chimes or strike. The pendulum controls the time.
O
You need that clock to be fixed
Same but mine is 1930 wall clock