New Harbor Freight Doyle vs KNIPEX Channellock Irwin Adjust Pliers
HTML-код
- Опубликовано: 18 май 2020
- Who makes the best adjustable? Today we are going to compare the New Harbor Freight 10" DOYLE Fast Adjust Water Pump Pliers to the KNIPEX Cobra 87 01 250 Hightech 10-Inch Water Pump Pliers. We will also look at the Channellock 422 Channellock 9 1/2in. V-Jaw tongue and groove pliers and the IRWIN Quick Adjusting GrooveLock VISE-GRIP pliers. The Husky tools adjustable pliers were purchased on clearance so unfortunately I do not have a link to that product from Home Depot.
Harbor Freight DOYLE 10" Fast Adjust Water Pump Pliers
Item 56748 www.harborfreight.com/10-in-f...
Doyle® Fast Adjust Water Pump Pliers have an easy push-button adjustment that opens instantly to one of 21 positions. The powerful V-jaw design gives you an unbeatable grip on oversize pipe, round stock and large hex fasteners. The induction hardened teeth bite into pipe, rods and shafts for a super secure grip. The self-locking mechanism allows easy one-hand operation.
Spring-loaded push-button design allows for fast and easy adjustments and a secure fit
2 in. jaw capacity with 21 adjustable positions for maximum torque
V-Jaw design provides multiple points of contact for stronger grip
Right angle, induction hardened teeth for stronger grip and longer life
High strength steel construction for superior durability
Rust protection reduces corrosion and increases tool life
Vinyl dipped handle provides comfort during extended use
100% Lifetime Guarantee
IRWIN Quick Adjusting GrooveLock VISE-GRIP 2-Pack Tongue & Groove Plier Set
Item 314851 Model 1763390
www.lowes.com/pd/IRWIN-Quick-...
Set contains one 8-in GrooveLock plier and one 10-in GrooveLock plier
Adjusts 2 times faster than traditional groove-joint pliers
Simple push of innovative Press-n-Slide button adjusts lower jaw 2 times faster than traditional groove-joint pliers
Multi-groove ratcheting system has twice the groove positions than any other groove-joint pliers, providing precise jaw positioning to grip any type of surface
Anti-pinch, non-slip ProTouch grips provide comfort, control, and less hand fatigue
Right-angle teeth grip in all directions for maximum bite
Metal Injection Molding (MIM) process for precision parts delivers strength and exceptional performance
Backed by the IRWIN Vise-Grip lifetime guarantee
KNIPEX Cobra 87 01 250 Hightech 10-Inch Water Pump Pliers
www.knipex.com/index.php?id=1...
No more time-consuming test-adjusting of the correct opening size. Just position the upper jaw to the workpiece, push button and move close the lower jaw, ingeniously simple. 30% more capacity than a conventional pipe wrench. Self-locking on pipes and nuts due to teeth set against the rotation - no slipping on the workpiece. Pinch guard prevents fingers from being pinched. Adjustment at the touch of a button. Has 25 adjustment positions to adjust to hex nuts up to 1 13/16" and round pipe up to 2".
Push the button for adjustment on the workpiece
Fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width
Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required
Gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: high wear resistance and stable gripping
Box-joint design for high stability due to double guide
Reliable catching of the hinge bolt: no unintentional shifting
Guard prevents operators’ fingers being pinched
Chrome vanadium electric steel, forged, multi stage oil-hardened
Channellock 422 Channellock® 9 1/2in. V-Jaw tongue and groove pliers give user more points of contact on round stock and tubing for a more secure grip. U.S.A.
www.channellock.com/product/422/
Features + Benefits
V-Jaws give you more points of contact on objects
Rust-resistant electronic coating
Undercut tongue and groove won't slip
Right angle, laser heat-treated teeth grip better and last longer
Patented reinforcing edge minimizes stress breakage
PermaLock fastener eliminates nut and bolt failure
#Tools #HarborFreight #Knipex #Pliers
If I had a dollar for every different way I hear somebody say Knipex, I could afford to buy a Knipex.
This was the most fancy one i think ive heard. With a simulated accent of some kind on the "i".
@@Wassenhoven420 In German, his pronunciation is fairly close.
This is the way they pronounce it on the manufacturers youtube channel. See for yourself.
18473988520 is their phone number if you want to hear how its correctly pronounced.. basically exactly how it's spelled with no fancy shit
@@jamessnook602 If you put it into Google Translate as German, and tap the "speaker" button for pronunciation, it is literally pronounced kih-NEE-pex
I'm a plumber and use pliers every single day, I bought knipex and never looked back, the ergonomics are so far superior than any other plier I've ever used.
Important thing about the Knipex is the treatment of the teeth. I've seen vids showing Knipex taking much more abuse while others showed teeth stripping down after short periods of moderate use.
Yea that’s honestly the difference, I picked up the new ones from HF and the teeth literally stripped down in 2 days of use while my knipex have been going on strong
I believe the teeth on the Irvine vise grips are not much better either.
That's my experience. I have several pairs of Knipex pliers that are a few years old, and they all look brand new. I can't say that about any other brand of pliers that I've ever owned.
For sure, the heat treating on the Knipex is a LOT better. I'm sure the HF pliers are find for most people, but if you're going to work them, get the Knipex for sure. Probably just worth spending the extra cash to get the better tool.
@@BarnStangz 100% agree. Knipex will run $10-$15 more, ut well worth it. Especially for professionals.
I can tell you from experience, the price on the knipex is entirely justified if you use them every day. I have 3 pairs, the 12 inch pair i have used on over 120 alignments and just on rusty nuts and bolts every day for the last 8 months and the teeth are still perfect. I managed to take a chunk out of them at one point, but I never noticed a performance loss and only noticed it when I went to clean them. As most people have said, the Irwin pliers aren't great. The teeth dull on the first bolt you turn, and the handles fall off after a week or so. Save up your money, and buy the knipex and don't worry about it ever again.
i agree.........they cost more but well worth it...
After using knipex, the rest just feel like ass. I tried a wiha Pliers Wrench. They felt so cheap. The Knipex just felt so right.
Had the irwin for 5 years without issue. And I destroy the crap out of it when using it.
@@vsar1938 I've had both the Knipex and the Irwin for a couple years now. I got the Irwin to throw in my to-go box and the Knipex for my "deluxe" wrenching needs. To be honest the Irwins are easier to use.
In my experience the knipex beat the snap on pliers. The knipex goes through heavy abuse from alignments too and the teeth and handles still look like i got them out of the package. The snap on one got just as abused and the teeth got all messed up and handles came off
You only need to flip the pliers upside down and pull up to reverse the turning direction, so no access issue, as always work smarter not harder 🙃
Easy now!!! Going all big brain on people. 🤣🤣🤣
Witchcraft
😂 I was about to start yelling this at my phone while watching
I thought about flipping the pliers as well. I scrolled quite a few replies to find this one … good job!
I'll stick to my Channellocks and Knipex pliers.
I wish Channellock made a pliers wrench like Knipex does so I can buy American made, but I guess Germany will receive my dollars.
@@andrewsalazar98 channellock.com/product/gls-3/
They're excellent for the price. I have a couple of them. The only shortfall of the Griplocks is that they're not as highly adjustable as a Knipex Cobra. But for less than $15, they're great.
Been doing alignment's for 30 years and started out with Knipex, I'm now on my second pair under warranty. Stick with the best.
I would like to see this test with before and after looks at the teeth.
I saw a similar review with many fewer pliers. They looked at the teeth. The Knippex was the person's own that he'd been using for a year in the field. Teeth still looked mostly new after the test and a year of professional use. The other's were brand-new and already had teeth damage after the tests.
I’d like to see that as well
I own all of these pliers except for the husky. The best ones are the knipex and Irwin no teeth damage at all and I use them all the time
I WOULD LIKE U TO STOP KILLING ENGLISH LANGUAGE
,,with before and after looks at the teeth''
WITH THAT ENGLISH U WOULDNT PASS LEAVING CERT WHERE I COME FROM
@@mcqcjc8409 with your all caps, you sound like a bigot. Practice what you preach
Fact that channellock is hanging out with these locking push button pliers can show they are like a slant 6 bulletproof
I have spent many hours with channel locks on my work belt or in my hand in the coal mines. They have always been my personal favorite.
I just ordered a 6” pair of the Irwin Vise Grip Groovelock pliers after watching RUclips videos. Great video comparison..!
Knipex fit, finish and quality is just superb! Love them So Much!
I have the Doyle non quick adjust pliers and they're great definitely might check these out
I have the newer V jaw version of the Channellock 422’s, and absolutely love them. Flawless in removing/installing gas lines.
I tried those and according to my hand they slip easier than the flat jaw style. Granted I tend to use 420's on everything regardless so proper sizing could be the issue
The Knipex is nice, as for Industrial repairs I always have Channellock on hand, I still have and use my fathers too but I use Irwin for various repairs too, however the teeth do wear prematurely compared to others
I been buying and channel lock doyle is very good
I had no idea that you could do this. I would always squeeze as hard as I could. Mind=blown
I think there different models of pliars and they don't all work this way
Nice comparison video and great tests. The Irwin’s are great for at home. They worked alright out in the field but the teeth do wear out but the grips are the best. Knipex have been great for me so far. Thanks for sharing
Funny, I hate the grips on the Irwin’s and love the grips on the Knipex (the standard ones like in the video, not the comfort grips) But I also prefer metal handled ratchets over comfort grips. Having choices are good!
Knipex also can be purchased with a comfort grip that is better than the grips on the Irwin’s
I bought a kenpeck 30 years ago off of the snap on truck. I still have it, and use it several times a month. But more recently I have bought the Harbor Freight version for my on road repair truck
Excellent info.Much appreciated. Thanks for sharing.
I don't care about the maximum force that they can take, I care about the minimum force it takes to hold onto something. I want the tool to make the job easier for me by clamping firmly or being controllable with the minimum effort. Most people say the Knipex brand makes the job the easiest so that is what I will probably buy next.
Bought the Irwin used them twice and the teeth got damaged from light use. The knipex are my go to they can take just about anything
I have a pair of adjustable clamping IRWIN pliers that I beat to death, that are in amazing shape still. I love them.
@@finbah5706 how old are they
@@finbah5706 yeah are they newer irwin or older?
I personally have a pair of knipex that I carry and use daily for my work (industrial maintenance) and after nearly 15 years the teeth on them show very little actual wear
The irwins are dope. Fit perfectly in cleanout flush plugs for tightening/removing without messing them up!
About a year ago, purchased the Milwaukee Knipex style wrench and it failed after about 3 weeks on the job as a commercial electrician. I have now use the Milwaukee channel lock style wrenches and they are great.
Great video ! Thanks! Good comments too! Thanks everyone !
I use my Irwin a lot and put a lot of weight on them. So far, 7yrs+ still going strong.
Knipex! Top quality that never fails with a long life! If you’re gonna use it everyday knipex is the way to go
I'm not generally one for getting the expensive tool, but I got and really like my Knipex. It's so thin and light and still feels completely solid. For the most part I can only compare it with Channel Lock though and the mechanism is just a lot better...but most of those have something similar.
Helpful for all the people out there who need to use their pliers exactly one (1) time
I have 2 pairs of the Irwin Vice Grips and they are my go-to pliers. I have had them 4 years now and have now and have not noticed any wear. I do use them for home use.
Started with Irwin hand me downs and channel lock brands slowly converting over to knipex as I grow as a plumbing/hvac tech
I'm a mechanic and I love my channelock !!
My wife has put up with my BS and abuse for decades, still has good teeth, has a good grip and serves me well. No need for a replacement for the sake of replacement. She's pretty much the Channellock of wives! Channellock FTW! Sometimes brand loyalty is earned for many reasons.
Great comparison!👍🏻👍🏻
Thanks buddy, appreciate you watching and commenting🛠
I do a lot of plumbing so I’m always using channel locks.I prefer the blue ones.The ads had me hook😂.
It’s true what you said only time will tell if it’s a good tool and that’s what happened to me.Ive been through a lot of Chanel locks and the blue ones are still here working fine.
I have a Channellock distributor locally so life is good even if I were to have an issue which I have not, but it’s always possible.
Knipex is made from old panzer tanks, they are indestructible, and my go to for cutters and plyers
Panzer tanks were obviously quite destructible :)
I took Machine Shop during my Sophomore year in high school in 1984, my dad and I went to the tool show at the Los Angeles convention center and Knipex had a booth, the guy doing the demos told us the the name was pronounced Nee Pex. In 1994 I bought a tool box from a guy I worked with that needed money and in it was a pair of Knipex pliers, they don't have the push button like they do now, but they still work great. My last trip to Harbor Freight they didn't have the Doyle's, but I will be picking some up eventually.
That guy was wrong, the "K" is pronounced:
ruclips.net/video/22O4u5w4q_A/видео.html
ruclips.net/video/0ElThr0GNd4/видео.html
I’ve broken two irwins. Had same tool in Knipex for three years no issues
I have every size knipex cobras, and plier wrenches. Obviously, I like them and prefer them over others. I have other brands too, and they work for the most part, but the knipex ALWAYS work, easier to use, very durable. Worth every cent
That was my first pair purchased for the review and it’s definitely a nice tool. I think I might have to buy the flat jaw ones in a few months🤫
@@ClientGraphics try the 100mm cobra :D
Ok so im gunna give you my thoughts on all of these, the knipex is the most expensive but personally i believe they are the best of the bunch, you put 200lbs on them all but I've put a 6ft pipe on my knipex pliers the Irwin teeth round over after a few uses and the locking mechanism on all of mine when i squeeze pressure on the handles they open wider instead if gripping now, the original channel locks are decent tools but they are a very old technology and have been around a long time so they are pretty basic but the channels seem to get hard to get into after a few years of use and dont grip as well as the knipex, the husky are similar to the channel locks but not built as well the pivot bolt gets loose and they are really wobbly and the teeth dont grip as good as the channel locks and not newrly as good as the knipex ive never used the harbor freight ones
One VERY long sentence. Hmmm....
@@mmarciniak yes and all with one breath....
@@mmarciniak must every one be a grammar Nazi... I'm not writing an essay
I think you could really use a period.
I have used channellocks whole life now I have my first pair of Knipex and I will never use anything else.
As an old guy, I have Craftsman and Irwin units both made in W. Germany (yeah, they are that old!), which are just relabeled Knipex units. I also have the actual Knipex units and all of these work really well and all have stood up the 30+ years of regular use. I'm not certain how today's copies of the Knipex units will work over the long run.
I was really irritated when the boss showed up with Craftsman pliers instead of Knipex, but they really are the same pliers. Same numbers in the casting and everything. We would wear them out in a couple of years, and absolutely no difference between them. At the time, the Craftsman were easier to get and cheaper.
good video, i own 4 knipex pliers, the 7" two 10" and one 12'............i also own the irwin 10" an a husky as well, my go to are definitely the knipex pliers...........
I have the vice grip brand, and after years of bouncing round in my mobile field box the button broke off. It has a 2 piece rivet design, and somehow split apart.
I had the Irwin ones but the teeth were gone after a couple uses. I ended up getting the channel locks I should’ve gotten to begin with.
I feel like a big factor for tools is availability. A lot of high end brands for pliers like Knipex and Wiha are not sold in most stores. A lot of people don't want to have to order a tool and wait days for it to arrive.
I use channel lock 420s and Knipex Cobra 10” love both and use both. I’ve been using Channel lock for 8 years now. Knipex is a nice plier too that I’ve recently thrown into my tool bag. Buy what works for you. Everyone works different and has different reasoning. It’s not a competition people. They’re tools. If they work for you that’s all that matters. Pipe fitter for 2 years and currently an HVAC Mechanic for 6 years and counting. For gas pipe they both work great. I use Rigid pipe wrenches for anything over 3/4” usually. Just find what works for you
I can tell u from experience the teeth on the irwins are the worst i have ever used. Be lucky to get a week out of them
They were really aggressive to begin with and after the first few uses the teeth rounded off which they still work but now they don't leave teeth marks on the pipe, but when you really have to wrench to undo something I grab the channellocks
Noticed that on all my Irwin vise grips. All smooth where there use to be teeth.
Agreed
My Irwins chipped a tooth pretty quickly
100% truth had a set of four blew the teeth out on two gave the other two to my neighbor and wished him luck
I use these multiple times every day. Ive broken the irwin ones, the harbor freight ones, and some tractor supply pliers, (not in this video) Finally buying the knipex. Hopefully they last
Never tried the Doyle. But I have broken all the other’s many times except the knipex. They seam to be indestructible. And as they break, they can crack your knuckles and often draw blood. LOL
Great vid thanks
Thanks Jorge for watching and commenting👍🏻
You would flip your pliers to the bottom side of the pipe and pull up towards you in a tight space it's the same for wrenches as well that is why the top end is longer for more leverage and the direction you are going in
Love my knipex cobra's i have every size they make and they haven't let me down at all... great video Chris @ClientGraphics
Chris this was a great demestration .. Excellent visual 👍
I use this style of plier more than most people doing the job that I have. Channelock used to make really good stuff. The last couple of years they aren't what they used to be. I've used just about every brand you can imagine. Knipex is the best by a large margin. Especially if you like your knuckles.
ive been wanting the knipex for a while now, but not easy to spend that much. did not know about the doyle. im going to give that one a try. the irwin handles came off of mine and the tool itself scratches easy, but so far its holding up ok
A test must be conducted to the limit as claimed by each brand. That's the only way to know which one performs better than the other. Those brand that past the performance test can then considered for other variables such as price, built quality, comfort, shape etc. That is my opinion to how systematically select the tools that meet one's requirement. I thank you for sharing and producing an informative video.
Well they all look good. Personally I've had a set of the Irwin's for years and years. I'm an HVAC tech and used to service units up north so I've run fair share of pipe. Still have them to this day, like new. Maybe the newer ones aren't as good as I see some negative comments here but I've had zero issues with mine
My favorite too. The handles slide off but they out perform the narrow jaws the other guys use and quick adjustment is nice
The irwin ones suck, knipex are the best ones I've used personally
In my experience I've had bad luck with channel locks wearing out. Not only the teeth but also the grooves where it adjusts and bites in. I was actually really shocked at just how many pairs I've burned through of the modern channel locks. All of my old school ones are still in service. I think their quality has suffered tremendously!
After some use, my Irwin's teeth rolled (soft steel?) & No longer have the bite they did when new. (The temper they put on these tools is the key to longevity)
The Knipex pliers are the most comfortable pliers I've ever used. I'm probably going to get one of the XS size (125 mm), but the 100 mm palm-size ones might be too small.
I had some Knipex side cutters I had to hide from all my co workers because they were so badass.
I can find the Husky tools online so I guess they are still being made?
Fourth. I love my knipix
Doyle is 19$ with coupon. 24.99 reg. I love the speed adjust on the pump pliers. I have knipex at work. Awesome. I'll have to try the Erwin vise grip
The regular price for the Doyle 12” is $24.99 and 10” is a $19.99. I reviewed the 10” in the video
I have 20 years experience in maintenance. Let's put these pliers in a hydraulic press and see which ones break first.. Project Farm demonstrated Knipex has roughly 3x the gripping force as all the rest. Buy what you want but I got the 3 pack of gators (no push button) Knipex for about $90. I use them every single day and I'll never look back. Not all Knipex stuff is worth the extra money but their pliers are second to none except possibly Vampires, but I have no experience with those yet. I switched to Knipex after the plant I worked at provided us with a pair. I immediately noticed that they will actually bite stainless pipe which is something Channellocks just won't hardly do unless you have a death grip on them. I still like Klein electrical tools and diagonal cutters better than Knipex.
Edit: Vampliers. Stupid autocorrect
I like how tool companies are getting on the Knipex bandwagon. NAPA has a similar pair of pliers from Carlyle called “P-Rex”. I would have liked to see those in the mix. The Knipex and Irwin versions are available for order from NAPA as well. I have an older pair of the Craftsman “Robo-Grip” pliers very similar to these pliers in your comparison test, and they still work great. Now we gotta wait for Tekton to come out with their version.
I don't need another pair but going to get some Knipex and vampliers just cause I have to have some. Tired of chineseium, want some quality stuff now.
I think I have the Robo-Grip ones some where... Actually I’m pretty sure I have them. If you can catch the Carlyle on sale it’s usually a decent choice. ✌️
John P one of the pairs of pliers I have are the 7” Irwin groove-joint pliers. They’re very handy. Tekton appears to offering more of their pliers made over here. I ordered the Tekton 16” groove-joint pliers mainly for the fan nut on my wife’s old Suburban, but I sold the Suburban. So, I haven’t used them yet.
Knipex. I use them for everything especially rusty rounded off bolts and nuts. They seem to really bite into the metal better. I also believe when sears/craftsman were still in business, the craftsman pliers were re-branded knipex. They were also made in Germany
I still have a couple pair of the Craftsman re-branded Knipex. Their handle cover is different and a little thicker than the Knipex. That’s when there were fewer adjustment channels, and many times I prefer that. It is quicker to get to the right size.
I have had the Channel Locks for years. Just got the Knipex within the last year. They both do the job. Knipex has a nicer finish for sure, but both perform the real work equally well..
I have evey one but the knipex and as much as I like the Doyle for the money, they're the only ones that get surface rust!
I had hoped you also had the Kobalt version
Harbor freight has some great tools and nice 3 ton jacks
I just took my old jacks under the recall issue and they give brand new not defect stands
@@gabrielmerza6904 you better take those back too. They've been recalled also.
Four over 50 years all I ever use was my set of Ridgid off set wenches never ever let me down I recall as a young guy hanging off the floor 4 ft on a cheater pipe and breaking loose a tough one..
It's been about two years now that I've had a pair of 12" Doyle channel lock pliers and a pair of the fast adjust style. So far I have no complaints at all. They compare pretty well to the USA made name brand Channellocks, but I don't feel bad when they get beat up a bit or absolutely soaked in a repair.
For the fast adjust pliers, which these days are $27 for the Channellocks and $25 for the Doyles, I wouldn't bother getting the import. They work fine, there's no problem with them, but why save $2 to buy something from a foreign country? I'd rather support people here making the pliers.
For the classic tongue and groove style: they're about as good as Channellock, slightly worse fit and finish, but not made in the USA. If you absolutely can't swing the $20 for the blue handled classic, $13 at Harbor Freight isn't money thrown away.
The Doyle also has a lifetime warranty. That is a definite plus.
I think one important aspect that isn't mentioned is the twisting action of the handles for some of these brands. I've used Channel Locks and Knipex and the Channel Locks handles twist ever so slightly just based off the build, where as the Knipex is built different and doesn't have this problem. I started with Channel Locks within my profession and now have Knipex and use them as my go to pliers. I haven't had any problems and love them. The biggest advantage for me is that there are way more adjustments (fine tuning) for the knipex ( i use the non button type and still has way more than the channel locks) over the channel locks. The teeth also seem harder and don't slip as much as the channel locks. Also the head of the knipex is just a bit thinner than the channel locks, which has the potential to get into more spots (not as restrictive).
So out of all of these tools, I would go with Knipex ever day of the week and so far, haven't been disappointed.
I would like to see a better pair of shoes next time. Thanks for the review.
The distance from leg to leg on the pliers, with the Knipex being the tightest, meaning you don't have to open your hand as wide.
I have knipex and channel Lock set they but work pretty similar knipex can get in tighter spaces
I couldn't go without my knipex
What about the Klein tools brand ones ?
How many things could be "roughly" measured?
Knipex has so many different versions. Which ones are the ones y’all are talking about when saying “it’s the best”.
How do you get the pliers to lock on the pipe? I've never been able to do that.
They only grip one direction. Always go into the bottom part of the pliers going against the grain of the teeth. If you go the other way it doesn’t work.
The most important thing that younger people have to understand today is that if you use a tool properly it’s going to last forever if you don’t use the tool right then it’s not going to last it just seems like younger people today are more interested in having the nice expensive tool rather than using a tool properly I mean I have cheap tools that are at least 30 years old and they still work great and those tools get used everyday.
Great demo. Was looking forward to seeing the new Doyle "Knipex style" pliers from HF. Also, is the ruling out on Walmarts' Hart Tools yet? They look cheap to me... With that in mind, I just picked up a pair of 'Hart' branded "Knipex Knockoffs" from Walmart this weekend for $12 to test. Like all the rest you've tested, they work when used correctly. Not as nice as Knipex. I'm not sure I feel confident standing on them either....
I've had the 10" Hart for a while, still holding up quite well actually. I can stand on them no problem lol. Took a bit of work but they turned the old exhaust out of a K181 Kohler that was rusted in place for about 52 years
Channel lock is dual direction because it has right angle tooth.
i love my knipex cobra in 100mm as an EDC Tool
That Doyle knipix knockoff looks pretty good. Need an an depth report to see how long them teeth will last.
That's the true test, if they will take use and abuse and the teeth remain sharp. I bought a pair of Husky pliers and with fairly little use the teeth had noticeable damage...I'm sticking with Channellock myself.
if the teeth wear, i wonder if u can take it in for warranty replacement?
@@Darkcruzer23 Yes, lifetime replacement.
Just bought a pair made by klein. They say made in Germany and I swear they look just like the knipex. Love them so far they work great
Chances are they are Knipex. Klein contracts out a lot of tools that aren't screwdrivers and electrical stuff they're known for. I have a 1/4" Klein ratchet that was made by SK, same as the SK 40970. Got a free SK rebuild kit in it even lol.
They're NWS.
@@swwordman What is NWS?
@@msclecarcrzy they're a German tool company. If you search "NWS water pump pliers" you'll see what looks exactly like the Klein pliers you have. They make great stuff, I'm sure you'll be happy with them.
Do you think HF will make a Doyle pliers wrench? Seems like the next natural step to expanding Doyle lineup.
I would hope, not sure if they will. Only time will tell but they do look to be continually adding to the Doyle line🤞
I was wondering that myself, I recently got a 7 in. pair in comfort grip and absolutely love em!! I think manufacturing them would be to expensive for HF to replicate and then sell at a reasonable price for the end user just my 2 cents
I have the knipex and the huskys and honestly i reach for the husky ones more often. They have been great tools. Used every day for over a year now.
Our distributor pronounces it nypex the k is silent and long i. And the channel lock no longer have a lifetime warranty. I tried to get a broken pair replaced.
Saw review on here show the Irwin brand with the teeth chewed up after only one use.....
I love channel lock
That was the best pronunciation of Knipex I have ever heard an American say
I agree with you 💯% Thank you!
Need to get the Channellock 430x to make it a fair comparison…they are the quick adjust that are most similar to the other pliers shown here
They still make channel locks the same way... its not an "old design" because they havent made a new one. Its THEE design. Less moving parts less room for failure. Channels will always stand the test of time while under rigorous use. Knipex are the shit tho im just clarifying
It’s funny I have a pair of 10 inch knipex and a pair of 10 inch Doyle pliers and use them both every day at work
I'm plumber and I use the knipex every day for 4 years. The weak point is the spring that holds the locking button. Eventually it softens and it doesn't hold the button in place. Second the slide surface is prone to rust and with combination off dust it is extremely difficult to lock on position. Sometimes they slip with painfully results... But the Jaws teeths holds very well after so much abuse!! These pliers are irreplaceable for me but they wear extremely fast than traditional pipe wrenches. I apologize for my English
I agree with the spring / button being the wear item on the Knipex in daily use. And like you said, they will rust. (I think they are available chromed now) With that said, Knipex is the only one in this group I would buy for someone that uses it on regular basis.
Alfredo Oquendo that’s good to know.
@@EvilOtto580 Ive seen this too, but i wonder how hard it could be to fashion one yourself...
I don't care for knipex Im here for the Irwin are they good for nut and bolts?