I JUST RAN ACROSS YOUR CHANNEL A FEW WEEKS AGO I LEARNED ALOT I DIDNT KNOW. AUG 27TH WAS MY 57TH B-DAY AND OVER THE YEARS MY BROTHER AND I HAVE BUILT AND CRASHED LOST AND SOME JUST WENT OUT OF CONTROL AND JUST FLEW NEVER TO BE SEEN AGAIN!! HELICOPTERS THE SMALL ONES W E FLEW IN THE HOUSE, THE CATS KILLED THEM!!! ALL AND ALL WERE ABOUT READY TO GET US A DRONE SO THANK FOR ALL YOUR INPUT AND WE WILL BE WATCHING IN THE FUTURE . CHRIS
cool video Dustin, I'm moving up on my skills and this would be a great next step up and this would be my first GPS which I'm excited about thanks for sharing your experience with us 😁
Dustin Dunnill this will be my first gps quad before I get my first hobby style quad the parrot bebop do you think this is a good exceleration or step up or will the bebop be too hard
Brilliant review.. thank you so much... it looks like a great value for money beginners drone. I fly RC planes but I've never had a quad. I'm definitely going to get one. Thank again kind regards Dave 🙂👍
Another nice review and great scenery Dustin. Has anyone purchased one recently that can comment on the build quality? I came across one review that said something about nylon rather than metal bearings as well as motors that burn out quickly.
Thanks for the video. My H502E is on it's way. I already bought a dji Phantom 4 pro. As a beginner, I like to practice flying with something cheaper. I have a Syma X5C and it neither has GPS nor altitude hold. That makes it very difficult to fly. I constantly have to throttle up & down. I was also very disappointed in it's range. I already have a Hubsan H002 nano quad and really like it. Cheaper and by far better than the nano folding arms I had.
+snamvar The cheaper toys are great for perfecting your flying skill which I think everyone should do first before investing into larger and more expensive/possibly dangerous drones.
I bought one last August. It flew for one battery and the left back prop lost power (not dead but reduced energy). Ordered replacement motors (from china which took some time to get) and replaced it. It still had the problem. Contacted Banggood and they gave me the usual spiel about checking the props were installed properly and after two weeks referred me to Hubsan. That was over two weeks ago and after one exchange they referred it to the engineers. Still waiting to hear from them.
+Dustin Dunnill Good video! Got a question for u about ur H501s, Have u upgraded the FW yet? I noticed my speed seems half meter per second slower when forward flying. I thought this might be something you like to test. 1.1.9 upgraded to 1.1.17
great review buddy...AGAIN....lol......for the money range, i think it does a great job, i see others out there with no GPS feature, with same or higher price tag, so my conclusion is that this is a good buy for fun, or novice in quads hobby.....my only worry is the brushed motors, which may mean low span in motor life....that being said, i already ordered one, hope its motors will last more than a week or two, lol......great work Dusting, keep it up
Mine wobbles pretty bad during flight as if a prop is bad and the GPS doesn't hold position well at all. I recalibrated the motors by holding down the left stick while turning the right stick. Compass was calibrated and I have at least 10-12 sats while flying. Any ideas or suggestions? I have installed brand new props as well
Dustin... does the transmitter simultaneously show heading degrees, altitude and distance; or does it alternate between showing those values? Looking to get one for a friend and from the on-line manual, I get the impression it alternates showing those values on the transmitter display. Without FPV, know heading at all times is invaluable. Thanks
Another great review. The only problem was the wind noise. It sounded, at times, like you were in a jet engine test cell. I wonder, if you placed a few layers of gauze bandage over the mike hole in your GoPro if perhaps it would act like a mike sock. Or if you moved to a corner of the park where the wind blows from behind you? The H502E definitely doesn't have nearly as good electronics as the 501S. The camera isn't 1080P. Did you calibrate the accelerometer? Alishanmao had similar results when he tested the FPV version of the 502 Desire. The bird would keep losing altitude.He gave it thumbs down. Perhaps Hubsan is getting bad component parts. ;-)
+Don Fish Jr. (The Flying Fish) This video was prior to my "mic wind fix" (shoved a transmitter stick foam over mic) now it is much better :) I'd recon there will be an occasional bad batch of barometers as they are so sensitive..maybe I got one..or maybe just too much wind.
Marvelous. I really listen carefully to what you say. You impart valuable information/knowledge. I was on the fence about the Hubsan H109Pro until I saw that series of reviews you did. I tweaked my budget for a couple of months and purchased one at a great price, under $400. I fly it in place of my Walkera 350PRO. The Walkira has a much better gimgol but I would rather risk an accident with a bird that cost me less than 1/2 what I paid for the Walkera over 2 years ago. Also the Hubsan out flies it and has a much more up to date controller. ;-D
I receive this drone westerday.tomorow is the maiden flight.So what i have to do after the compass calibration?Just wait for the satellites?Thanks in advance.
Hi good review! Just a noob question. So as this drone has a good camera but didnt come with a LCD system to see a live feed of the video, is there any Hubsan Android app which we can use along side during flight using 2.4GHz channel? Or we need to have a 5.8Ghz video head unit etc? What do you recommend.. Sorry as I a a bit new in this hobby and planning to buy the same Quad.
+Raheel Barlas if you want Hubsans affordable GPS drone with FPV on your phone and advanced functions get the H507A ruclips.net/video/RYXRjUFPEfM/видео.html
Dustin Dunnill thanks and I saw you H507A review. I liked the craft but the only two down point I saw are the battery life and no controller with it (I prefer that over a virtual phone joystick). Having said that I really liked the H502E and even the S model. I think the S model has built in FPV. What do you say in terms of recommendation for H502S for performance and quality and should I buy that?
Hey Dustin, related to this video and others of the same mfg or vendor, would you please consider advising us of the cross usage of controller?. My apartment is filling with quads, and controllers. Since there are very few quad companies that offer BNFs it would be great to buy a lesser featured quad, and be able to use the controller with the higher end controller. (Like I think you suggested with the MJX 600 and x601h both being flyable with the JMX x601h controller.) It'd be great to just put away the less featured controllers. I know spread spectrum can affect this, but with your great testing we might get surprised to find one mfg plant made quads for a pair of vendors that are cross compatible? Hope I didn't confuse the issue.
Hi i have recently purchased a new transmitter for my H502e i am having trouble binding it to the quad. Im following the bind procedure but im not getting the flashing H all im getting is a flashing hubsan logo whitch flashes no matter what i do any ideas thanks.
Im not sure how to read all the telemetry, what dose that H stand for next to the satellite number and the height numbers ? The heading or something im not sure what that is
Mine came today but unfortunately it's the newer version where they have replaced the bearings with a nylon/plastic piece, so I have ordered a set of bearings to replace the plastic rubbish they have installed. Which was annoying because you have to be careful anyway because of durability of these type quads with brushed motors, tear and wear and with them going cheap and replacing the bearings just increases the wear and fail time. So I'm not going to fly mine till I get the bearings and with the locktite on the screws I don't want to screw on the propellers to have to undo them again next week with the bearing installation. So about a 5 day delay until I can fly it.
Gearbest I got 8 dollars back so it covers the cost of the bearings, other options were send it back and pay for it to come back to me. Which would cost a fortune. I'm never going to purchase a more expensive quad from them as there returns are horrific.
Dean Parvin Yes there service is disgusting, I just buy things under $20 from them if it is not available somewhere else. Also if you decide too cancel the order before shipping, you cannot get a refund, just a credit, and you will have too buy something else from them. I have never had a parcel lost by any other internet company, but 2 at Gearbest, still waiting for a replacement
When using GPS even for mapping Dilution of precision can come into play. Basically even with a large number of satellites you can have a poor reading of the coordinate. This can happen if they (satellites) are in a tight cluster. The farther apart the they are the better the coordinate calculated. It is quite possible you flew that when you had poor satellite positioning. This article will help explain it better than I can in a post. en.m.wikipedia.org/wiki/Dilution_of_precision_(navigation)
+Thomas Gehrdes Jr yes, pdop is a possibility here. And it's tuff to know what it is. I may start checking it on my phone at my test location before flight but I don't think the phone GPS is as good as most drones
+Dustin Dunnill, i know there is a website that will show the times of day that are the best and worst to fly in your area. When I track it down I will forward it your way.
i just recently got this drone and one of the motors is making a really high pitch noise when the battery is plugged in anyone else have this problem.. it is a really annoying high pitch noise
I have an extra 2000mah 7.4v 25c lipo battery here(i will modify the battery connector to make it compatible), is it okay to use it with my hubsan h502e??
Shame about your GPS. My H502E seems decent along with the GPS and Barometer hold. Apart from the brushed motors this is a good buy if you get one that works properly.
It was not a fair review, flying it in high gusts of wind, that really has influence on the barometer of these cheaper quads. I have this one, and do not expect the same performance of a DJI. Also he should have flown it a few times before doing a flight review, he was not even familiar with the controls. Oh now its facing me!!! that's what it does when RTH is activated. This unprofessional reviewing gets my goat. Its a very nice Quad for the price
HELLO. I AM A NEW USER FOR THIS . would you kindly tell me what kind of the app i can download on my iphone or ipad for the FPV ( Pro-camera view) so i can see what shown when it flying ? thx.
It should fly up to the RTH altitude you set in app first then start coming home. If your flying where there is no good GPS satellite coverage... Then anything could happen 😂🍻
I know this is a stupid question but what is the difference between bush and brushless I own the hubsan h502s I have no flown it yet because of medical reason but hopefully I will soon tx u .I also don;'t think this one has follow me mood I know mine does I did also order extra props and battery with it
The 502E just as GPS no follow me and the 502s as follow me..To answer about the motors. What is the difference between a brushless motor and brushed motor? A Brushed Motor has a rotating set of wound wire coils(armature) which acts as an electromagnet with two poles. A mechanical rotary switch(commutator) reverses the direction of the electric current twice every cycle, to flow through the armature so that the poles of the electromagnet push and pull against the permanent magnets on the outside of the motor. As the poles of the armature electromagnet pass the poles of the permanent magnets, the commutator reverses the polarity of the armature electromagnet. During the instant of switching polarity, inertia keeps the motor going in the proper direction. A Brushless Motor uses a permanent magnet external rotor, three phases of driving coils, one or more devices to sense the position of the rotor, and the associated drive electronics. The coils are activated, one phase after the other, by the electronic speed controller as cued by the signals from the rotor position sensors.
+wolf11 My simplified response would be: brushed = magnet in center with friction "brushes" which may wear out sooner. Brushless = magnets on outside with no contact brushes which "should" last longer and seem to be more efficient/powerful since they can handle higher rpm.
does anyone know how to get the video feed to work and also if anyone knows how to get the video and pics taken to download on the memory card for the x4 desire?
W. Smith yea from what ive found out this is wrong no difference in 502s or 502e except the transmitter both use same protocol and ive seen others bind 502s controller to 502e and the follow me works so does fpv im just not 100% sure on headless ill find out
Reef Anglers yes. It will return to the spot when you first arm the motors so if you are in a boat, you will surely have drifted so I wouldn't use that feature.
Yes it does, height and Distance not the speed I think, but all the rest, actually very nice for the price. But if you have the money go for the H501s it has nice FPV and brushless motors
Pullsee I always order spare motors when I buy a brushed Quad, but never had use of them. I think if you live in a hot country and you fly multiple battery without letting the motors cool, then yes you will burn them, even a brushless wont last, then
Dam you done a good review something wrong with that drone one cut my finger the same way when I got it last week i don't trust what it's going to do like it's got a mind of it own it was doing everything it want need to do don't trust the drone is until predictable don't trust it does right one minute then goes crazy all of a sudden be careful with that drone
Dustin Dunnill found a video that showed how to bind..... long story short, turn off remote press and hold video button... while holding video button slide power to on..... works great.
My H502E's performance is opposite to yours. The GPS Hold and RTH are great. Mine has video/ photo problems. Has focusing issues with the camera. Borrowing a quote from Forrest Gump. Toy quads are like Box of chocolates you don't know what you're going to get.
![HUBSAN H507A X4 STAR GPS Drone - Full Review - [Unboxing, Flight Test, BEE ATTACK!, Pros & Cons]](http://i.ytimg.com/vi/RYXRjUFPEfM/mqdefault.jpg)
![HUBSAN X4 H502s GPS QuadCopter Drone Full Review - [UnBox, Setup, Flight Test, Pros & Cons]](http://i.ytimg.com/vi/9OpmPZCtRFA/mqdefault.jpg)
![WLTOYS Q333 FUTURE 1 FPV - Full Review (Mini DJI Inspire) - [UnBox, Setup, Flight Test, Pros & Cons]](/img/1.gif)
What a voice! Very nice an helpfull review, thanks a lot. Glad to hear somebody talking clean and slowly enough for non-native speakers.
I JUST RAN ACROSS YOUR CHANNEL A FEW WEEKS AGO I LEARNED ALOT I DIDNT KNOW. AUG 27TH WAS MY 57TH B-DAY AND OVER THE YEARS MY BROTHER AND I HAVE BUILT AND CRASHED LOST AND SOME JUST WENT OUT OF CONTROL AND JUST FLEW NEVER TO BE SEEN AGAIN!! HELICOPTERS THE SMALL ONES W E FLEW IN THE HOUSE, THE CATS KILLED THEM!!! ALL AND ALL WERE ABOUT READY TO GET US A DRONE SO THANK FOR ALL YOUR INPUT AND WE WILL BE WATCHING IN THE FUTURE . CHRIS
Pls stop screaming...
Just got mines today for 48$ can't wait to get off work to fly it great video u really explain yourself very good
Had mine up to 253 meters in a good wind. I did a "better compass cal". Nice video!! (Subscribed)
Just ordered this for my 8 year old son, he loves his hubsan x4
hold down trim button and you can turn off all lights when flying
cool video Dustin, I'm moving up on my skills and this would be a great next step up and this would be my first GPS which I'm excited about thanks for sharing your experience with us 😁
Awesome I like the design of the Hubsan just might buy this little guy thanks for sharing
+md 95tsi 👍
Dustin Dunnill this will be my first gps quad before I get my first hobby style quad the parrot bebop do you think this is a good exceleration or step up or will the bebop be too hard
Brilliant review.. thank you so much... it looks like a great value for money beginners drone. I fly RC planes but I've never had a quad. I'm definitely going to get one. Thank again kind regards Dave 🙂👍
Busy testing the same drone and finding alt hold and even positioning struggles in wind. But I’m sure on calm days you’re gonna get excellent results.
Another nice review and great scenery Dustin. Has anyone purchased one recently that can comment on the build quality? I came across one review that said something about nylon rather than metal bearings as well as motors that burn out quickly.
Thanks mate I enjoyed that looking to get into drones as a novice
Thank you Dustin Love the way you explain everything I learn a lot from you
Thanks for the video. My H502E is on it's way. I already bought a dji Phantom 4 pro. As a beginner, I like to practice flying with something cheaper. I have a Syma X5C and it neither has GPS nor altitude hold. That makes it very difficult to fly. I constantly have to throttle up & down. I was also very disappointed in it's range. I already have a Hubsan H002 nano quad and really like it. Cheaper and by far better than the nano folding arms I had.
+snamvar The cheaper toys are great for perfecting your flying skill which I think everyone should do first before investing into larger and more expensive/possibly dangerous drones.
I bought one last August. It flew for one battery and the left back prop lost power (not dead but reduced energy). Ordered replacement motors (from china which took some time to get) and replaced it. It still had the problem. Contacted Banggood and they gave me the usual spiel about checking the props were installed properly and after two weeks referred me to Hubsan. That was over two weeks ago and after one exchange they referred it to the engineers. Still waiting to hear from them.
Hubsan has a new model called the H216a it has a1080 p camera gps and the remote looks a lot like the 502e remote.The price is 98.00 .
I wish we could turn GPS off and fly it manually. Maybe some mods could be done to allow GPS to be turned off, rather than requiring GPS at all times.
+markybyeah maybe it'll work with the h501s controller which has that function. I'll try it.
+Dustin Dunnill Good video! Got a question for u about ur H501s, Have u upgraded the FW yet? I noticed my speed seems half meter per second slower when forward flying. I thought this might be something you like to test. 1.1.9 upgraded to 1.1.17
Pullsee
You cant take off before 6 because motors wont arm. Plus if it did, it would lock on soon as it gained altitude. It doesn't work like that
+markybyeah I know that and I own other non GPS quads. New firmware does make gps lock tight, but I suspect trade off is speed with H501s.
great review buddy...AGAIN....lol......for the money range, i think it does a great job, i see others out there with no GPS feature, with same or higher price tag, so my conclusion is that this is a good buy for fun, or novice in quads hobby.....my only worry is the brushed motors, which may mean low span in motor life....that being said, i already ordered one, hope its motors will last more than a week or two, lol......great work Dusting, keep it up
i will like to know if it will be possible to fly the HUBSAN H502E X4 DESIRE with android phone because i lost the remote?
Mine wobbles pretty bad during flight as if a prop is bad and the GPS doesn't hold position well at all. I recalibrated the motors by holding down the left stick while turning the right stick. Compass was calibrated and I have at least 10-12 sats while flying. Any ideas or suggestions? I have installed brand new props as well
mine really flies 11+ to 12 minutes on average. Looks like your flight time was heavily cut down due to the wind.
good to know. Could be that you've cycled your battery more also. I think the best battery capacity is achieved after around 10 cycles.
Dustin... does the transmitter simultaneously show heading degrees, altitude and distance; or does it alternate between showing those values? Looking to get one for a friend and from the on-line manual, I get the impression it alternates showing those values on the transmitter display. Without FPV, know heading at all times is invaluable. Thanks
I honestly can't remember and have given the drone away sorry. Maybe someone can chime in 👍
Another great review. The only problem was the wind noise. It sounded, at times, like you were in a jet engine test cell. I wonder, if you placed a few layers of gauze bandage over the mike hole in your GoPro if perhaps it would act like a mike sock. Or if you moved to a corner of the park where the wind blows from behind you? The H502E definitely doesn't have nearly as good electronics as the 501S. The camera isn't 1080P. Did you calibrate the accelerometer? Alishanmao had similar results when he tested the FPV version of the 502 Desire. The bird would keep losing altitude.He gave it thumbs down. Perhaps Hubsan is getting bad component parts. ;-)
+Don Fish Jr. (The Flying Fish) This video was prior to my "mic wind fix" (shoved a transmitter stick foam over mic) now it is much better :)
I'd recon there will be an occasional bad batch of barometers as they are so sensitive..maybe I got one..or maybe just too much wind.
Marvelous. I really listen carefully to what you say. You impart valuable information/knowledge. I was on the fence about the Hubsan H109Pro until I saw that series of reviews you did. I tweaked my budget for a couple of months and purchased one at a great price, under $400. I fly it in place of my Walkera 350PRO. The Walkira has a much better gimgol but I would rather risk an accident with a bird that cost me less than 1/2 what I paid for the Walkera over 2 years ago. Also the Hubsan out flies it and has a much more up to date controller. ;-D
Dustin Dunnill what's the difference between the h502e and the h502s, the letters, is it FPV is s and no FPV is e ?
I have one...but the 720p camera looks like 360p after transfering sd card footage. You get what you pay for.
I need to know about this drone durablity.. Will motor burn out fast??
Great review Dustin! Do you think the hubsan 501s will a better choice to buy than the 502E? Thanks.
Yes more money but the S as follow me
+John Paul Low Seck like Heath said, yes. Follow me, brushless and FPV all included but also costs more. Depends on your budget really.
my hubsan h502e no longer binds to the transmitter can you help only flew it 3 time???
I receive this drone westerday.tomorow is the maiden flight.So what i have to do after the compass calibration?Just wait for the satellites?Thanks in advance.
Hi good review! Just a noob question. So as this drone has a good camera but didnt come with a LCD system to see a live feed of the video, is there any Hubsan Android app which we can use along side during flight using 2.4GHz channel? Or we need to have a 5.8Ghz video head unit etc? What do you recommend.. Sorry as I a a bit new in this hobby and planning to buy the same Quad.
+Raheel Barlas if you want Hubsans affordable GPS drone with FPV on your phone and advanced functions get the H507A ruclips.net/video/RYXRjUFPEfM/видео.html
Dustin Dunnill thanks and I saw you H507A review. I liked the craft but the only two down point I saw are the battery life and no controller with it (I prefer that over a virtual phone joystick). Having said that I really liked the H502E and even the S model. I think the S model has built in FPV. What do you say in terms of recommendation for H502S for performance and quality and should I buy that?
do you prefer this over H502S?
u can bind 502s controller to 502e and itll work same a 502s
Hey Dustin, related to this video and others of the same mfg or vendor, would you please consider advising us of the cross usage of controller?. My apartment is filling with quads, and controllers. Since there are very few quad companies that offer BNFs it would be great to buy a lesser featured quad, and be able to use the controller with the higher end controller. (Like I think you suggested with the MJX 600 and x601h both being flyable with the JMX x601h controller.) It'd be great to just put away the less featured controllers. I know spread spectrum can affect this, but with your great testing we might get surprised to find one mfg plant made quads for a pair of vendors that are cross compatible? Hope I didn't confuse the issue.
Hi i have recently purchased a new transmitter for my H502e i am having trouble binding it to the quad. Im following the bind procedure but im not getting the flashing H all im getting is a flashing hubsan logo whitch flashes no matter what i do any ideas thanks.
So what are your thoughts on the 501svs the 502s features compared to price and which one is worth the money?.
Hi,New to your channel (it's fantastic by the way) and new to quads ,Would you recommend this for a novice like me ?
Thanks
Hi - would you suggest updating the firmware even though it runs fine? I have heard horror stories about updating firmware on other drones.
Really nice quad.
How far does it goes and what the limit of the height
Im not sure how to read all the telemetry, what dose that H stand for next to the satellite number and the height numbers ? The heading or something im not sure what that is
Mine came today but unfortunately it's the newer version where they have replaced the bearings with a nylon/plastic piece, so I have ordered a set of bearings to replace the plastic rubbish they have installed. Which was annoying because you have to be careful anyway because of durability of these type quads with brushed motors, tear and wear and with them going cheap and replacing the bearings just increases the wear and fail time. So I'm not going to fly mine till I get the bearings and with the locktite on the screws I don't want to screw on the propellers to have to undo them again next week with the bearing installation. So about a 5 day delay until I can fly it.
O and thanks for the review excellent as always.
Looks like you got the very old version, where did you buy it ?
Gearbest I got 8 dollars back so it covers the cost of the bearings, other options were send it back and pay for it to come back to me. Which would cost a fortune. I'm never going to purchase a more expensive quad from them as there returns are horrific.
They also said if anything else is wrong with it its basically tough they won't do any more.
Dean Parvin Yes there service is disgusting, I just buy things under $20 from them if it is not available somewhere else. Also if you decide too cancel the order before shipping, you cannot get a refund, just a credit, and you will have too buy something else from them. I have never had a parcel lost by any other internet company, but 2 at Gearbest, still waiting for a replacement
Will the motors last longer if you lubricate the bearings and let the motors cool down after each flight?.
+Raymond Palermo cool down yes. But not sure about lubrication as it will attract more dirt and dust
Would you consider this for a brand new beginner into the drone space?
YES!
Somehow the "Return to Home and Headless mode" Doesn't work even I had 11 sats
+gab wei Make sure you compass calibrate with no metal/electronics around 😀
When using GPS even for mapping Dilution of precision can come into play. Basically even with a large number of satellites you can have a poor reading of the coordinate. This can happen if they (satellites) are in a tight cluster. The farther apart the they are the better the coordinate calculated. It is quite possible you flew that when you had poor satellite positioning. This article will help explain it better than I can in a post.
en.m.wikipedia.org/wiki/Dilution_of_precision_(navigation)
+Thomas Gehrdes Jr yes, pdop is a possibility here. And it's tuff to know what it is. I may start checking it on my phone at my test location before flight but I don't think the phone GPS is as good as most drones
+Dustin Dunnill, i know there is a website that will show the times of day that are the best and worst to fly in your area. When I track it down I will forward it your way.
Dustin should I get the hubsan h502s or h502e
great review thanks!
hubsan h502e vs syma x5hc ?what is the best to get. please tell me
i just recently got this drone and one of the motors is making a really high pitch noise when the battery is plugged in anyone else have this problem.. it is a really annoying high pitch noise
I have an extra 2000mah 7.4v 25c lipo battery here(i will modify the battery connector to make it compatible), is it okay to use it with my hubsan h502e??
Sounds too heavy for this. You'll wear out the brushed motors quickly.
Shame about your GPS. My H502E seems decent along with the GPS and Barometer hold. Apart from the brushed motors this is a good buy if you get one that works properly.
It was not a fair review, flying it in high gusts of wind, that really has influence on the barometer of these cheaper quads. I have this one, and do not expect the same performance of a DJI. Also he should have flown it a few times before doing a flight review, he was not even familiar with the controls. Oh now its facing me!!! that's what it does when RTH is activated. This unprofessional reviewing gets my goat. Its a very nice Quad for the price
Ruudy L how do you get the video footage off the camera is there a card?
***** Yes there is a SD card, but not included in the package, you get your own
HELLO. I AM A NEW USER FOR THIS . would you kindly tell me what kind of the app i can download on my iphone or ipad for the FPV ( Pro-camera view) so i can see what shown when it flying ? thx.
+Yvr Travelhouse as far as I know this one does not have any FPV capabilities. Only direct recording video to the drone memory card.
What is the difference between this and the 502t
What happens if you turn of the controller
+Matt Kinsella it will return and land at takeoff point
@@DustinDunnill Or spaz out and try to fly directly upwards...ask me how I know. lol
It should fly up to the RTH altitude you set in app first then start coming home. If your flying where there is no good GPS satellite coverage... Then anything could happen 😂🍻
Can you use it with fpv 5.8ghz fpv googles?
I know this is a stupid question but what is the difference between bush and brushless I own the hubsan h502s I have no flown it yet because of medical reason but hopefully I will soon tx u .I also don;'t think this one has follow me mood I know mine does I did also order extra props and battery with it
The 502E just as GPS no follow me and the 502s as follow me..To answer about the motors. What is the difference between a brushless motor and brushed motor?
A Brushed Motor has a rotating set of wound wire coils(armature) which acts as an electromagnet with two poles. A mechanical rotary switch(commutator) reverses the direction of the electric current twice every cycle, to flow through the armature so that the poles of the electromagnet push and pull against the permanent magnets on the outside of the motor. As the poles of the armature electromagnet pass the poles of the permanent magnets, the commutator reverses the polarity of the armature electromagnet. During the instant of switching polarity, inertia keeps the motor going in the proper direction.
A Brushless Motor uses a permanent magnet external rotor, three phases of driving coils, one or more devices to sense the position of the rotor, and the associated drive electronics. The coils are activated, one phase after the other, by the electronic speed controller as cued by the signals from the rotor position sensors.
+Heath Hunter holy smokes Heath now there's an answer!
+wolf11 My simplified response would be: brushed = magnet in center with friction "brushes" which may wear out sooner. Brushless = magnets on outside with no contact brushes which "should" last longer and seem to be more efficient/powerful since they can handle higher rpm.
ok got it tx u
lol just showing off lol
Will this work with the Gteng fpv watch?
SD card an card reader what do I buy for this I just got my an would like to find out what SD card do I get Thanks ??????
sky man you can get one at Walmart target or probably even at Kmart
I had this drone, it is execellent, but the GPS does not work
Good review, Thanks
does anyone know how to get the video feed to work and also if anyone knows how to get the video and pics taken to download on the memory card for the x4 desire?
Will the controller for an H502S work on this quad?
W. Smith yea from what ive found out this is wrong no difference in 502s or 502e except the transmitter both use same protocol and ive seen others bind 502s controller to 502e and the follow me works so does fpv im just not 100% sure on headless ill find out
can it connect to phone ?
Do you here a high pitch hum coming from the quadcopter? Power on and the transmitter on. Is this normal?
I don't recall hearing that sorry
Wildhog32 I hear it on mine.
does your h502e have the headless mode feature?
Will the rth feature fail if im on a boat thats drifting at say 2 knots?
Reef Anglers yes. It will return to the spot when you first arm the motors so if you are in a boat, you will surely have drifted so I wouldn't use that feature.
dose it have a follow me mode?
no
Doesn't it show the telemetry on the transmitter screen?
Yes it does, height and Distance not the speed I think, but all the rest, actually very nice for the price. But if you have the money go for the H501s it has nice FPV and brushless motors
Pullsee I always order spare motors when I buy a brushed Quad, but never had use of them. I think if you live in a hot country and you fly multiple battery without letting the motors cool, then yes you will burn them, even a brushless wont last, then
Why it dont have FPV 😣😢😭
Dam you done a good review something wrong with that drone one cut my finger the same way when I got it last week i don't trust what it's going to do like it's got a mind of it own it was doing everything it want need to do don't trust the drone is until predictable don't trust it does right one minute then goes crazy all of a sudden be careful with that drone
does this use a sd card ?
Gary Orlowski yes
Can't get remote and quad to bind...
Make sure you read the manual. Maybe you got a defective one.
Dustin Dunnill found a video that showed how to bind..... long story short, turn off remote press and hold video button... while holding video button slide power to on..... works great.
What is Binding?
+Luisito Perez connecting controller to quad for control
I got hubson its brill
Thanks man.
Invest in a lawn sweeper.
+ReneeNme yah if I owned this park...lol
Sounds really windy.
return was bad because of wind
My H502E's performance is opposite to yours. The GPS Hold and RTH are great. Mine has video/ photo problems. Has focusing issues with the camera. Borrowing a quote from Forrest Gump. Toy quads are like Box of chocolates you don't know what you're going to get.
hubsan x4 502E is not good, engine failure with less than eight flights
Thx
好好玩
Stable 0%
Ты иностранец там реально нищий
Not worth anything if it flies wherever it wants. Garbage blah - mine took off back to China tonight.
Fail do not buy!👎 mine flew off to a tree on a windless day
+GreySpark04 maybe you got a defective, didn't calibrate compass or did not wait for satellite lock?