After washing parts I regularly rung the wash alcohol through the cure cycle and than let stand for a few hours. I than decant the liquid from the cured resin in the bottom. Same concept but faster. Thanks for the vid!
I have tried a few diff things over the years to clean my wash... I use a stone filter at bottom of 5 gal bucket and will do that a cpl times but eventually it stops working then I will do aluim sulfide and wahla it looks like new again.... I have 4 five gal buckets in diff stages and do a 2 wash rinse then a final wash in brand new so stuff comes out squeaky clean in end.... I have too many diff stages of dirty but I dont have to get new very often... now I have a buddy who does moonshine so I get his heads which he dont use so its free but I still recycle it like I am paying for it....
Get a plastic drink dispenser from home bargains, has a tap at the bottom. Pour dirty resin in, leave for 2 weeks and it seperates really good and the tap mskes it easy to pour out
This comment! It's the way I do it too, no messing about, leave it a few weeks, it separates out, open the tap for clean ipa. I leave my print to drain too before washing, so less resin to clean off.
Which product is stronger that can clean every kind of paper that are stained with colors paper like money and stuff like that isopropanol alcohol and ssd solution 😊
At the moment, I don't have the option to leave it outside (below freezing). Can you use the wash and cure station that comes with some of the anycubic printers?
@@greedy3d480 just saw the video window pop up before your reply, I knew I'd missed a video. Thanks for responding and thanks for the videos. Your stuff is helping a lot with my workplaces resin print farm, I need to find more resin and filament uk based channels to follow!
I order 25ltrs at a time @ £60 its pretty cheap also exposing ipa to direct sunlight depreciates it properties so it becomes less effective at cleaning ....so really this is a waste of time
Nice! Thanks. I need to do this with a few dirty ipa containers 😊
Quick n easy 😁👍
After washing parts I regularly rung the wash alcohol through the cure cycle and than let stand for a few hours. I than decant the liquid from the cured resin in the bottom. Same concept but faster. Thanks for the vid!
I have tried a few diff things over the years to clean my wash... I use a stone filter at bottom of 5 gal bucket and will do that a cpl times but eventually it stops working then I will do aluim sulfide and wahla it looks like new again.... I have 4 five gal buckets in diff stages and do a 2 wash rinse then a final wash in brand new so stuff comes out squeaky clean in end.... I have too many diff stages of dirty but I dont have to get new very often... now I have a buddy who does moonshine so I get his heads which he dont use so its free but I still recycle it like I am paying for it....
Get a plastic drink dispenser from home bargains, has a tap at the bottom. Pour dirty resin in, leave for 2 weeks and it seperates really good and the tap mskes it easy to pour out
This comment! It's the way I do it too, no messing about, leave it a few weeks, it separates out, open the tap for clean ipa. I leave my print to drain too before washing, so less resin to clean off.
Every time put mine in the sun it turns brown.
Which product is stronger that can clean every kind of paper that are stained with colors paper like money and stuff like that isopropanol alcohol and ssd solution 😊
👍
@@greedy3d480 isopropyl alcohol 99.9 is this product same as ssd solution is it with same purposes that can be usdd to clesn etc
At the moment, I don't have the option to leave it outside (below freezing). Can you use the wash and cure station that comes with some of the anycubic printers?
Yeah that'll work
I might have missed it from a previous video, but where did you get that syringe from and what size is it? Mike from Lancashire
I did a video and a link 😁
@@greedy3d480 just saw the video window pop up before your reply, I knew I'd missed a video. Thanks for responding and thanks for the videos. Your stuff is helping a lot with my workplaces resin print farm, I need to find more resin and filament uk based channels to follow!
This is really cool but I dont have the patience for this lol
It's really easy tbh 👍
I order 25ltrs at a time @ £60 its pretty cheap also exposing ipa to direct sunlight depreciates it properties so it becomes less effective at cleaning ....so really this is a waste of time
I have to disagree 👍
@@greedy3d480 read the spec sheet for storage ....keep out of sunlight..
@@amubis1 like I say it still works just fine.
If you look at the big resin companies they actually wash their parts down to 50/50 IPA and Water. So I disagree this is a waste of time.
@@TheGibsonmark the big resin companies do not use the same resin as we do