Это видео недоступно.
Сожалеем об этом.
4020 John Deere pto brake, traction clutch adjustment.
HTML-код
- Опубликовано: 2 апр 2024
- #jenniferlopezsexy
hopefully this hashtag works, all the 13 year old boys on RUclips frustrated to why they see this video when looking for girls on RUclips. the sears catalog never failed..
hopefully this helps someone understand what is going on.
Great explanation of the system. I got to where I didn't use the inching peddle all that much on the 4020, 3020, or the 4240 we had. Just throttle down and use the brakes until I got it into park.
I have a 4020 that has the clutch housing full of oil and it's flowing out of the starter. Looks like I will be breaking it at both splits and changing seal! I am waiting for the manual and can't wait to get to work! You make it all look so easy!
If it's a late 4020 syncro it could be the pto pistons leaking into the clutch housing.
Transmission input shaft can be fixed from clutch side.
Only need 1 split
@@jonstevensmaplegrovefarms3754 I believe that is the case only seems to do it with PTO engaged. Thanks for that!
@@CaseysOffRoadRecovery
Late model 4020 synchro?
Excellent videos!! I have a 65 powershift I plan on fixing the pto break next winter. Your videos will really help understanding while reading through the manual.
You did okay Jon. I couldn't have said it better myself 😂
Ha, wise guy!
Great explanation!
Great Video! I really really enjoy when you do these kind of videos. More please!
Well thank you very much for the kind words.
I've replaced a few of these PTO brake cones over the years and almost all of them had the lining missing. These brakes were never meant to stop high inertia PTO loads at speed. It's best if the operator keeps the PTO engaged and uses the engine as the brake until idle speed is reached at which time the PTO can be turned off.
Good point.
That aluminum lever in side the transmission pto control valve was broke in my 4230. It was harder to remove then it was to put back together
Ha, yeah.
Oh boy. I’m running a vertical mixer with a 4020.
Hi,
Great videos. I own a 4050 and have trouble with rockshaft 3pt operation. It does not raise fully up in “min” load setting but when I move it to max it goes all the way up. I suspect that something have happened to the internal linkage, have you ever experienced this fault on a JD? When the control arm(connected to lever in cab) is in max clockwise position (fully raised) a characteristic klick sound is observed and it klicks and jumps a a bit just before it starts to lower. Thanks
If you scroll back through my videos you will see a 3pt settings. Have your local dealer copy the pages for you and then use the video to go along with the book.
@@jonstevensmaplegrovefarms3754 Thanks. I have already tried that procedure with copies of the TM section as help with no luck and my mechanic suspect something is wrong with the linkage as the lift works in min but it won’t go fully up. Is there any chance that some other type of hydraulic malfunction could cause this?
@anderslundberg9701
I would lift valve housing off if adjustments aren't helping. A spring could have broke, roller came off cam follower...
@@jonstevensmaplegrovefarms3754 it was a pin that was missing (assume it is at the bottom of the transmission casing..) anyway good to find something that have caused this. A follow up, when hitch is in max height the tractor gives full pressure on the assist cylinders (and the main one) I have read somewhere that this is normal. Do you know if so is the case? Thanks!
In theory it stops from the signal of the linkage and not because the shaft can't turn anymore. I would say it wouldn't be under full system pressure
do you put a feeler gauge in anywhere or just turn it up 3 slots
Turn what up 3 slots?
Great video! Thank you! My early 4020 power shift pto seems like it doesn’t stop but it’s intermittent. Seems to do it more with the 1000rpm shaft in. Would that be a pressure issue?
Can't see how the different shaft would make a difference?
Intermittent, if you have brake pressure then maybe something is at the end of its life?
@@jonstevensmaplegrovefarms3754
I wouldn’t have thought so either. I’m not doubting the brake could be worn out but it’s weird that it doesn’t do it all the time. That gear the brake engages, that’s an idler right?
@taylorsunderlage5176 yep it is.
Is the lever coming all the way back? So if the pto is turning, can you cycle the handle a couple time's making sure to pull it all the way back.
@@jonstevensmaplegrovefarms3754
I’ll have to try it next time I run it. Seems like if it’s spinning and I cycle it at low idle it stops and stays stopped.
Good one
On a 4430 with rubber tees on the return line. I have to replace the tees every year because they crack and leak fuel . Have you ever worked on this problem?
I have replaced many of them but we have never had to replace them yearly.
Are you getting them from an aftermarket company?Or from john deere
You did ok
Hi john i have a 4650 i brought it with the pto constantly running will my tractor operate on the same system as the one in the video
Regards
Nick
Same theory, the pto brake just pushes against the big pto gear.
@@jonstevensmaplegrovefarms3754
Thank you
Your video on the steering box under the dash was really helpful at the moment iam taking of the water pump plus watching the video on it
Regards
Nick
Thanks.
Hi Jon. Looks like Charlie is a good training aid for you!
Yes. With the questions I get I could do a full time job of taking a 4020 and 4440 apart from front to back and video each step
You had me scared for awhile. I was afraid you found more problems in there.
Heck Jon everything that comes out of your mouth makes sense sooner or later
Ha, sometimes it takes a while but we get there!
Thanks.