Thank you for making this video! I grew up in a time when girls did housework and only boys learned tools and outdoor chores. I would be lost without simple videos like this showing me the basics!
@@RollingThruLife Same with me! Couldn't figure out how to get the sand paper on even after reading the instructions. Your video was a fantastic help! Thanks a million!
Thank you for the video and explaining how to put the sandpaper sheets on. I’ve had my sander for a few years and lost the instructions and was getting very frustrated until I found your video. So thank you very much!!
Going to look at this sander. I am just now getting a few tools for my new wood craft ideas and so needing a sander. Thank you for this information very helpful.
This is so helpful! So much better than having to read those cryptic instructions. I’m surprised at how many women commented here. I also grew up kind of learning that women don’t do carpentry, but at some point it just dawned on me how dumb it is to have to live with obnoxious little home issues that should be a quick fix. It feels great to do this stuff myself! There’s a lot I don’t know, however, so I love videos like this - you don’t assume I’m an expert at this! Thank you 💕
@@RollingThruLife You’re a hit with the ladies! Haha! I just sanded this gross old door down to it’s beautiful original wood & am preparing to finish it. Thanks for the help!
I have same model. Worked well til the dust outlet cracked and a pinky nail peice fell in and keep motor from spinning. Now trying to figure out how to take apart
I bought one of these about 4 months ago and had the same issues with the rubber pad wearing down. It also melts and sticks to the sandpaper after extended use. They do sell a replacement pad assembly for around $10 on Amazon. Although cheap to begin with, you will be changing these pads out down the road. As a comparison, I bought a similar Makita years ago (20+), used it extensively and NEVER had this problem. It finally broke and I bought the B&D to replace it. Big mistake! My recommendation is you get what you pay for! Headed out now to buy something better...
I just got this sander today. On my first sheet of sand paper the rubber pad has melted in the middle and stuck to the paper. One hour of use maybe! Going to need a better quality of rubber pad.
This video saved me from throwing this thing in the river and I don't even live anywhere near a river. With the instructions included I absolutely could not understand how to put the paper on. I'm not a stupid person, I follow instructions and assembly all kinds of furniture. The instructions with this sander were completely useless. I also find the sander to be incredibly loud. I'm sure my neighbors are like "what is she doing now!"
OK ... I didn't exactly bald the wood but it is enough to get the first coat on ... click here to my facebook page if ya wanna see it facebook.com/?ref=tn_tnmn
Hi. Nice video. What is the exact model number please? On Amazon the closet thing im seeing is a BDeqs300 orbital sander. Also for sanding interior on ceilings (porch) and window molding and room divider arch what is the best type of sander? Palm, Orbital, Random orbital? So many articles with conflicting info. Or would we more than one type for the different projects mentioned? Thanks.
Thanks! at the 9 second mark, on the box it says bdeqs300. Same as you mention. Yea I see it says orbital on Amazon, but the pictures of item are the square same as mine. Maybe they stopped making it and now only orbital. man your shoulders will be burning up doing a ceiling! I never used a round/orbital so can't compare but I believe they pretty much do same job
Are you sanding ceiling just to smooth or are you removing paint? If removing paint, that's a big job with this small sander, be better off spraying and then scrapping.
It was a hand me down and I was going to try it (now I know why my mom never used it lol). The manual is NOT user friendly. It has 2 picture steps that dont show clip handling, Though I assumed It was teh use of them I was afraid to break something if wrong. And the sheets in the caryall... are same size as the pad..... probably for a dif model. Thank You for posting this. Though I think I may use my bigger sander first anyway
it wont suck everything in, but...did you press the sander with the paper attached down onto the plastic tray so that it pokes the holes through the paper? 2:17 mark on vid, through the holes is how dust is sucked in
@@RollingThruLife It’s just that for empathy people such as myself, watching a person struggle holding camera in one hand and item in other, it’s draws away from the presentation. To your benefitsYou’ll get more thumbs ups and views and therefore more money.
Thank you for making this video! I grew up in a time when girls did housework and only boys learned tools and outdoor chores. I would be lost without simple videos like this showing me the basics!
glad it helped
I just got this sander and I didn’t want to read the instructions came here and watched your amazing tutorial. Thank you 🙏
Cool, thanks
Ditto😂
Your cams with instructions? Lol. Not mine.
@@kevinkelley3906 she looks like she knows how to sand down hard wood ;)
instructions weren't useful anyway
I just got this sander. Thank you SO much for the GREAT review!
Your welcome, good luck with your projects!
Thank you so much. This helped me figure out how to attach the sandpaper!! No more painful hand cramps for me! Gratitude.
Your welcome! Oh yea, much easier than by hand
Lliked your video just and only because I couldnt figure out how to get the sandpaper on even after I had messed with those side clips😂
Carlos Alvarez, same here! The instruction manual was useless but this guy shows how with one hand!!
thanks
@@RollingThruLife Same with me! Couldn't figure out how to get the sand paper on even after reading the instructions. Your video was a fantastic help! Thanks a million!
@@bdav9095 Glad it helped
Thank you for the video and explaining how to put the sandpaper sheets on. I’ve had my sander for a few years and lost the instructions and was getting very frustrated until I found your video. So thank you very much!!
Glad it helped
Simple and to the point. Great illustrations. Thanks
Going to look at this sander. I am just now getting a few tools for my new wood craft ideas and so needing a sander. Thank you for this information very helpful.
Thanks...this will help me a lot in my small project of restoring a weathered plank
This is so helpful! So much better than having to read those cryptic instructions. I’m surprised at how many women commented here. I also grew up kind of learning that women don’t do carpentry, but at some point it just dawned on me how dumb it is to have to live with obnoxious little home issues that should be a quick fix. It feels great to do this stuff myself! There’s a lot I don’t know, however, so I love videos like this - you don’t assume I’m an expert at this! Thank you 💕
glad it helped, yea lots of women.
@@RollingThruLife You’re a hit with the ladies! Haha!
I just sanded this gross old door down to it’s beautiful original wood & am preparing to finish it. Thanks for the help!
@@AK-jt7kh sounds awesome, good luck
This was a really useful video! Thanks for taking the time to make it. I learned a lot!!
Glad it was helpful!
Thank u. Your video provided the most information on how to use this. Using it for the first time this was so helpful.
Glad it was helpful!
Thank you, this was very helpful. Just purchased today to sand and refinish a small buffet. Wish me luck.
Good luck!
Thanks for teaching how to use it, especially for a first timer like me.
Your welcome, glad it helped!
thank you for the review! just purchased mines today!
Have fun!
Thank you. Simple and informative! 👍🏽😊
your welcome!
Very helpful. Thank you.
Thank you. This was very helpful.
Glad it helped thanks
Thank you, you described everything in a simple layman's terms.
Glad it was helpful!
This video helped me tremendously thank you
welcome
Very helpful. I couldn’t figure out how to get the sandpaper on 🤦🏽♀️. So thank you!!!!!
ITS Tricky, glad it helped
Great sander, you can attach a vacuum hose to the end of the dust collection nozzle with an attachment and it will suck up the dust more efficiently.
thanks for tip
I have same model. Worked well til the dust outlet cracked and a pinky nail peice fell in and keep motor from spinning. Now trying to figure out how to take apart
Just bought one thank you.....I now know how to put the sandpaper onto the base, the book is confusing! Excellent.!
your welcome, glad it helped, good luck with projects
Very helpful video!
thank you for this video. way better than the instructions that came with the sander.
Glad it helped
Thank you for the detailed video!
Glad it was helpful!
Thank you for the video! I got the first clamp on but having difficulty with the back clamp towards the bag. Still a very useful video!
Glad it helped!
I bought one of these about 4 months ago and had the same issues with the rubber pad wearing down. It also melts and sticks to the sandpaper after extended use. They do sell a replacement pad assembly for around $10 on Amazon. Although cheap to begin with, you will be changing these pads out down the road. As a comparison, I bought a similar Makita years ago (20+), used it extensively and NEVER had this problem. It finally broke and I bought the B&D to replace it. Big mistake! My recommendation is you get what you pay for! Headed out now to buy something better...
thanks
I just got this sander today. On my first sheet of sand paper the rubber pad has melted in the middle and stuck to the paper. One hour of use maybe! Going to need a better quality of rubber pad.
This video saved me from throwing this thing in the river and I don't even live anywhere near a river. With the instructions included I absolutely could not understand how to put the paper on. I'm not a stupid person, I follow instructions and assembly all kinds of furniture. The instructions with this sander were completely useless. I also find the sander to be incredibly loud. I'm sure my neighbors are like "what is she doing now!"
Yes its very loud for sure. glad it helped
Thanks a lot, I'm going to buy one
Thank you for your help!
Glad it helped, thanks
Thank you, very helpful!!!
Glad it helped, thanks
Thanks for this demo ... I am about to do it! As we speak ... lol ... I'll come back later and let you know how I made out.
Good luck, remember don't hold in 1 place or it will go too deep
OK ... I didn't exactly bald the wood but it is enough to get the first coat on ... click here to my facebook page if ya wanna see it facebook.com/?ref=tn_tnmn
Good. clicked your link but doesn't go to your page
Thank you, you made my day,
Glad you enjoyed it!
What type of screwdriver can remove the screws that hold the backing pad?
off hand not sure
Will this sander take old paint off of fence straight up and down
sure, works at any angle, even upside down
thank you....I have been fighting with the sander to get the paper on properly.
yea its a little tricky on the one side
Hi. Nice video. What is the exact model number please? On Amazon the closet thing im seeing is a BDeqs300 orbital sander. Also for sanding interior on ceilings (porch) and window molding and room divider arch what is the best type of sander? Palm, Orbital, Random orbital? So many articles with conflicting info. Or would we more than one type for the different projects mentioned? Thanks.
Thanks! at the 9 second mark, on the box it says bdeqs300. Same as you
mention. Yea I see it says orbital on Amazon, but the pictures of item
are the square same as mine. Maybe they stopped making it and now only
orbital. man your shoulders will be burning up doing a ceiling! I
never used a round/orbital so can't compare but I believe they pretty
much do same job
Thanks. Also thanks for the heads up about the effort required for the ceiling part. Might have to enlist my 34 yr old son! 😀
Are you sanding ceiling just to smooth or are you removing paint? If removing paint, that's a big job with this small sander, be better off spraying and then scrapping.
I think it's the ka450 now.
Thank you. I just bought this today and couldn’t figure out the sandpaper.
yea its tricky, thanks
How do you change the pad? I took the screws off and I can’t get the pad loose.
not sure, never did, mine is worn down also.
I cannot get the pad off either
I just got it off. Twist it and it comes off from the bearing but looks expensive to replace
Did you ever find the part? I am searching for it and can't find it!
not sure what you mean?
Great video
Thanks!
It was a hand me down and I was going to try it (now I know why my mom never used it lol). The manual is NOT user friendly. It has 2 picture steps that dont show clip handling, Though I assumed It was teh use of them I was afraid to break something if wrong. And the sheets in the caryall... are same size as the pad..... probably for a dif model. Thank You for posting this. Though I think I may use my bigger sander first anyway
thanks
I guess, it has no speed control.
Can we sand plywood?
no it doesn't.sure
Cannot suck the dust into dust bag please help me bro
it wont suck everything in, but...did you press the sander with the paper attached down onto the plastic tray so that it pokes the holes through the paper? 2:17 mark on vid, through the holes is how dust is sucked in
Rolling Thru Life I am already punch the hole but dust not collecting
Thanks for this video. The instruction booklet that came with the sander wasn’t clear.
Glad it helped
great video,thanks fron chris in ontario,canada
Thanks for watching!
Thank you soooooo much God bless yougreatly
Glad it helped
Thank you.
welcome
So it can work for cars?
I know nothing about bodywork on automobiles so I can't answer
No man you want a polisher.... unless your talking about wet sanding in which case I don’t think this will work. Just my 2 cents
The rubber backer pad is a BIG problem with this model sander. It is impossible to find an exact replacement, and other ones you try aren't cheap.
it does wear out over time
thank you
You're welcome
Thanks
Welcome
Как её разобрать ?
?? thanks
Good
Thanks
I got a new sander. I named Bernie...
lol thanks
Use it
thanks
I hate them round sanders which is why I got me a square one
Me too.
Maine India
Thankyou for your video. Directions very confusing.
You're welcome
Your volume is really low.
ok
Use a tripod please.
yes sir
@@RollingThruLife It’s just that for empathy people such as myself, watching a person struggle holding camera in one hand and item in other, it’s draws away from the presentation. To your benefitsYou’ll get more thumbs ups and views and therefore more money.
thank you
welcome