Reminds me of the sedona engine but I've never seen one stripped this far down. So I can't remember seeing the "pipe" between the 2 sides of the engine there. The kia version had junk cream/amber plastic chain guides that kept breaking off.
I notice that there are two holes for small chain guides between the CVVTS where the valve cover meets. Are two short chain guides supposed to be attached here? My Kia also has these holes for the guides but when I opened the valve cover, there were no guides attached.
@@TV-uq6uj 2009 Kia Borrego. 3.8 V6. I installed new chains, tensioners, and guides (including the two small ones), intake and exhaust OCV's, plugs, coils, and belt. It runs great but still throwing P0018 after a few trips. Either CVVT or sensors. Thanks
@@TV-uq6uj Thank you for replying Please iwant help give me the torque for this bolts in this engine . The value of allowed of torque uesd in this operation .
I have a 09 Kia borrego with the 3.8 engine is it going to be the same and what's the torque specs and how did u know u we're at tdc and cam marks were lined up
I picked up a complete chain kit w/ water and oil pump from a CNSmotors on ebay and used this video to install. I buy from them a lot and they haven't messed up yet. They sell Hyundai OEM parts. Hope this helps!
perfect, simple, and straight to the point without any ridiculous editing or off topic moments. thank you!
Thank you for showing the 3.8 some love on RUclips.
Thank you. ^^
Thanks for the English subtitles!!!
Thank you for watching :)
Thanks you helped me a lot, did not understand the language but you showed the points
Great video, really useful. Any tips/advice or common issue you’ve seen with the 3.8s ?
Thamk you, i did the same and after few miles the chain went of and behin the pieces attached to the camshafts what could be done wrong?
Good evening, I would like information on adjusting the cylinder head, connecting rod and main frame.
Reminds me of the sedona engine but I've never seen one stripped this far down. So I can't remember seeing the "pipe" between the 2 sides of the engine there. The kia version had junk cream/amber plastic chain guides that kept breaking off.
Can you also do a G6DK/G6DA engine rebuild for used car buyers who bought a genesis coupe with a blown engine?
I notice that there are two holes for small chain guides between the CVVTS where the valve cover meets. Are two short chain guides supposed to be attached here? My Kia also has these holes for the guides but when I opened the valve cover, there were no guides attached.
I can give you an answer if you tell me the model and model of the vehicle.
@@TV-uq6uj 2009 Kia Borrego. 3.8 V6. I installed new chains, tensioners, and guides (including the two small ones), intake and exhaust OCV's, plugs, coils, and belt. It runs great but still throwing P0018 after a few trips. Either CVVT or sensors. Thanks
Thank you for this vid!
^^
Nice job , definitely not my LS . I'm going to have to do this on my rebuild of my Genesis coupe .
Please tell me if there is a necessary maintenance video
Buenas noches me podría ayudar con un ajuste culata biela y bancada Kia Sorento 2017 v6
Good evening, I would like information on adjusting the cylinder head, connecting rod and main frame.
Thanks for this video
Please iwant thes value of tide torque using in this engine.
thank you.
@@TV-uq6uj
Thank you for replying
Please iwant help give me the torque for this bolts in this engine . The value of allowed of torque uesd in this operation .
Connecting rod
2.3~2.7 kgf + 98~102 (Angle)
Connecting rod bearing Oil gap
0.038~0.056mm
Crank bearing cap
5.0 kgf + 90도(Angle) 1~8 번
2.0 kgf + 120도 (Angle) 9~16 번
3.0 ~ 3.2 kgf 17~24 번
Crank bearing cap Oil gap
0.022 ~ 0.040 mm
Cylinder to piston spacing
0.03 ~ 0.05 mm
cam shaft cap
Order of concluding - I3 E3 1step / I1 E1 2step / I2 E2 3step / I4 E4 4step
1.step 0.6 kgf
2.step 1.0 ~ 1.2 kgf
Head bolt
3.8 ~ 4.2 kgf (1step) + 118 ~ 122도 (2step Angle)
Timing chain guard bolt (12MM)
2.0 ~ 2.5 kgf
Tensioner
1.9 ~ 2.2 kgf
Tensioner(chain)
1.0 ~ 1.2 kgf
Oil pump Gear bolt (12MM)
1.9 ~ 2.5 kgf
Oil pump chain cover (10MM)
1.0 ~ 1.2 kgf
that's the same for a kia sorento 2011 right
do you have experience with the TAO V8's?
Does the 2010 gen coupe have a timing belt or chain?
Chain. The G6DK and the newer G6DA is literally the same engine except the DA has a different fuel system.
Okay
❤
Excellent job!!!!
Thank you.
Hi . What level of torque are you using?
Nm
Thanks. I asked was it 10nm or 15 or 20nm? Cheers
@@TV-uq6uj but still I didn't know that did you use 10nm,15nm or 20 nm? Cheers
Hi ..
Thanks for this video.
I wants the torque tights for bolts of oil pump to this engine .
Best Regards.
Oil pump Gear bolt (12MM)
1.9 ~ 2.5 kgf
@@TV-uq6uj
Thanks
I have a 09 Kia borrego with the 3.8 engine is it going to be the same and what's the torque specs and how did u know u we're at tdc and cam marks were lined up
is this 2008 Kia Sedona 3.8 engine. exhaust sprocket doesn't like mine, why ?.
The format of gdi and mpi is different.
And it depends on the model year.
토크 랜치 들을 쓰시는데 토크 들을 존 알려 주실수ㅠ있으신지요?
헤드 볼트, 크랭크, 캠, 피스톤 등 토크가 중요한 볼트들...
BK380
커넥팅로드
2.3~2.7 kgf + 98~102도 (각도법)
커넥팅로드 베어링 오일간극
0.038~0.056mm
크랭크 베어링 캡
5.0 kgf + 90도(각도법) 1~8 번 가운데 볼트(제일 두꺼운 볼트)
2.0 kgf + 120도 (각도법) 9~16 번
3.0 ~ 3.2 kgf 17~24 번 (블럭 사이드 볼트)
크랭크 캡 베어링 오일간극
0.022 ~ 0.040 mm
실린더와 피스톤 간극
0.03 ~ 0.05 mm
캠샤프트 베어링 캡
캡 볼트 조임 순서 I3 E3 1번 / I1 E1 2번 / I2 E2 3번 / I4 E4
1단계 0.6 kgf
2단계 1.0 ~ 1.2 kgf
헤드 볼트
3.8 ~ 4.2 kgf (1단계) + 118 ~ 122도 (각도법)
(2단계)90도
타이밍 체인 가드 볼트 (12MM)
2.0 ~ 2.5 kgf
텐셔너 암
1.9 ~ 2.2 kgf
오토 텐셔너(체인)
1.0 ~ 1.2 kgf
오일 펌프 (12MM볼트 기어)
1.9 ~ 2.5 kgf
오일펌프 체인 커버(10MM볼트)
1.0 ~ 1.2 kgf
감사합니다. 곧 작업을 해야할것 같은데 하면서 또 여쭤 봐야 할듯 하네요. 정비 손 놓은지가 10년이 엄었지만 해외에서 직접 해야할 상황이 되것 같아요. 다시 한번 감사드립니다.
@@jhrtv6811 필요하신 동영상 댓글 남겨주시면 영상 업로드 해드리겠습니다.
필요하신 영상 남겨주시면 영상 업로드 해드리겠습니다.
How much would the timing change kit cost ?
I picked up a complete chain kit w/ water and oil pump from a CNSmotors on ebay and used this video to install. I buy from them a lot and they haven't messed up yet. They sell Hyundai OEM parts. Hope this helps!
@@ulyssesluna hi, could you share a link, thanks
Engine removal is nessesary ?
3.8 Lightweight pistons were used.
Breakage of the piston land portion may occur.
엔진 타입이 MPI인가요 페이스리프트 GDI인가요?
MPI 타입 입니다.
MPI 엔진 입니다.
안녕하세요 제차량이 09년식 380오토입니다 혹시 제차량이랑 같은건가요?
똑같은 체인입니다ㅋ 07년 3.8 카니발에도 이거 씁니다
@@joezz9995 차종은 젠쿱380 인데 같은건가요?
@@김태연-i7l 네 그렇습니다
I need a video on how to do it with the engine not pulled out.... anyone???
If you take front panel off, you can do that!
I took the radiator out and had plenty of space to work