Disassembling a 50 Year Old Ford 351 Windsor
HTML-код
- Опубликовано: 18 окт 2024
- Before we started working on my block I accidentally drenched my pants and shoes so I had to change into sweats and unfortunately I didn’t have an extra pair of shoes other than my Moto boots… so there’s that haha. But we got the job done regardless. The next morning I took the Block to Cam’s to get machine work done. I also picked up my TKO 2 transmission from my friend Tim at (CAMS) Canton Automotive Machine Services.
-1986 Foxbody Mustang
-1971 351 Windsor
bored and stroked to a 410
-TKO 2 manual Transmission
-Bogart wheels @
Time Stamps
0:17 Picking up my Transmission
1:50 Disassembling the old 351
7:17 Taking the 351 to CAMS
8:48 Ripping in Razor
Thanks for watching! Stay tuned for more updates. Don’t forget to give me a thumbs up and hit that subscribe button!
My Merch 👇🏼Reflective & Iridescent Hoodies, lounge wear, Checkered Bikinis and so to be legging with pockets!
motorsportsmol...
My website
motorsportsmol...
Social media & Discount codes
shor.by/EjuT
My Onlyfans
onlyfans.com/m...
Featured Channels! Go check them out for more content.
Lucore Automotive
/ lucoreautoandlucoreracing
...
Music: www.epidemicsound.com
Video was filmed using a
GoPro 9,DJI Pocket , iPhone.
DJI Pocket 2 Creator Combo💥 - 3 Axis Gimbal Stabilizer with 4K Camera, 1/1.7” CMOS, 64MP Photo, Pocket-Sized, ActiveTrack 3.0, RUclips TikTok Video Vlog, for Android and iPhone www.amazon.com...
Man, that engine really takes me back. My first car, purchased in early 1973 was a 1970 Mach 1 with this exact same engine. I was actually kinda embarrassed to say my car had this engine as every young Ford hot rodder wanted the 428CJ. If not that than a 351 Cleveland. The Windsor was considered a truck engine snd it had very little aftermarket hit rod parts support unlike today. Thanks for the trip down memory lane! And yes, I am am an old fart!
Nothing better than a beautiful young lady, working on motors, in dirt bike boots. I love it!!!
Gotta love a girl who is not afraid to get dirty.
Especially one who walks around in your shop with sock feet!
She has gloves on
Omg watching you taking the engine apart wasn’t enough the fact you had your Mx boots on doing it your partner is a lucky guy
Great to see you getting in the shop and getting some work done with some greasy ole engines! The snow is on the ground already, but before you know it racing season will be here again!
@@MotorsportsMolly you've got the drive, the network, and the will to see it through :) You'll be whipping folks who aren't ready for you soon enough!
Love seeing the younger generations getting into cars and racing in general. I also love seeing girls/ women getting into it also. Especially when they are wanting to learn how to work on them and not afraid to get their hands dirty.
KILLER JOB CAN'T WAIT ......................... EVERYONE GO RACING
Cams just did my oldsmobile block. They are the only place I'll go to! Cant wait to see the finished product.
Dang Molly ! you pulled the crank out of that block like a BOSS ! I've seen bigger dudes then you struggle to pluck em out..
All that work and wearing her ridding boots 👢 awesome 👌 👏 😎 👍
Molly. I’m following Billy and his dad’s channel and now yours. Looks like a terrific channel. Now I have 3 channels to support. Actually I have others but yours and Billy’s family channels are the first of the street racing channels. Little background I’m a retired military aircraft mechanic on high performance aircraft but have always enjoyed working on just about everything. Had a brand new 68 fastback mustang when I was in the military but when I came home from Vietnam it just couldn’t fit a wife and two daughters so the car of my dreams went bye bye. Anyway most cars after 71 were pure junk as are many today. My knew-neighborhood just moved in happens to be a vintage car collector so you never know what I might buy.anyway hope your channel does well stay healthy and safe in this crazy world and by the way my one daughter lives in Loveland Ohio and I’m on Long Island NY but this pandemic screws up everything. Best of luck and will follow your success Artie 😊🇺🇸🏁
She is on her game. She has what she needs to get the job done, snap-on or harbor freight.
Molly is killing it in those motocross boots😊
Harbor freight is the best for most of us people on a budget. Looking forward to seeing the 351 preform. Working like ya do in a shop your gonna spill stuff on yourself, still looked great 👍
Hey Molly! Enjoying the content as always. That car under the tarp at the start was beautiful! And a bit of V8 education is always interesting. 50 years ago here in the UK was mostly small sub 2-litre, 4 cylinder engines with maybe twin carbs! A 6 if you were lucky!
Nice to see her involved in her race car. Most of the time you see young people just drive and don’t know anything about what they are driving. Rock on Molly
Now we talkin !! 351 windsors are highly capable 🤩
always great to see y'all working and racing when i get time
For a 50 year old engine, that thing is in surprisingly better shape than i expected. I do miss wrenching on cars. 👍
Loving your videos .. love a 351 windsor , should be a great build for you guys .🏁🏁🏁.. Thanks for sharing ..!!
Jim B _28 A 351 WINDSOR is the only way to go in the 351 line it is the best 351 there is solely in my opinion I've seen the 351 WINDSOR perform in a RACE CAR & STREET CAR & they run like a STRIPPED APE & that includes they are better than the 351 CLEVLAND they are just very impressing to me ( THE 351 WINDSOR THAT IS)
Would be a great spokeswomen for Harbor Freight. Nothing wrong with there stuff. Have used them for a long time. Keep putting the work in. Great video.
She needs to make more videos then one a month love the ford content
Great video and progress on your engine Molly, thank you!
P.S. I'd add an aluminum main girdle and windage tray too. The aluminum will help soak up unwanted harmonics. Gotta' keep those "bad vibes" down! Lol!
Love to see you building your car. Can't wait till its back together and your racing it. Go go go Molly!!
You forget one more GO
Thought it was a 69-70 block until I’d saw the main saddles. Then in the title of the video, lol. 69-70 was the best of the Windsor blocks but they were low deck 9.480 vrs 9.500. All 69-74 are pretty stout though. Mine makes 626hp n/a and only 393 cubic inches. With some spray that’ll be a hot rod.
You are one of a kind girl love seeing you work you have lert a lot hands on
Cant wait to hear that engine come to life awesome video molly keep them coming ✌🇨🇦
I'm glad to see you back on here !
I see u make the girl work hard and the boys have fun with there toys on the street
The rim/tire combo on that car is super badass. A 351 out of a 13-14 GT500 with a Whipple would be so cool in that car. Steve
I follow you from Saudi Arabia, the videos are beautiful
🇸🇦❤️🇺🇸
Great video. History in the first content. Music was nice as well thanks for sharing. Keep it up
It makes a real nice 408” stroker engine that makes more than enough horsepower and torque for pretty much whatever you’d like to do with it. I had one of these engines in a ‘79’ Mercury Capri and it was a very fun car 😉
Great to see you on your game.
You are doing a Great job on the build 🥇🥇🥇🥇 you and Billy the kid🥇🥇🥇🥇🥇🥇🥇
A proper built Windsor will make great power and be reliable.
Molly I'm excited to see your build
That 69 351 was a good motor....back in the day I had a 69 Ford Torino GT with a 351 4 barrel that was a beast.....
ruclips.net/video/stpqMtj_jBw/видео.html
A little tip guys. Purchase a large commercial cooking pan and attach it to the engine stands lower legs. It will catch all the oil, coolant, dirt, hardware, parts. It saves a lot of time on cleanup and avoids tracking antifreeze, oil, grease all over the garage,cars. If you have pets, children remove any antifreeze, fuel, oils,etc off the floor, low shelves, etc.
that engine is going to be a ripper lol Great low end TQ, Great mid range & power till 7000+ with a solid roller cam.
Or 9,000 RPM's.......
351 Windsor is a great choice im building a 351 w stroker 393 with twin 88 mm turbos with a holly sniper EFI it should ramp up to 1400 hp and will be fun . i enjoy watching your vids very cool to see a beautiful young lady that has big interests in building cars / gear head fer sure keep up the good work and be safe ps; get a cage in that car
Dang, you fast forwarded through the funnest part of the tear down.
You two are great together love you guys viedoes
You guys should do calendars id buy one if like you guys the cars etc
You go ma’am , getting it done . Love your channel
well I'm happy that I'm not the only one that has worked on a car project in socks lol.
@@MotorsportsMolly Love the channel Molly. Keep being you. You and Billy are drawing a huge crowd. :)
3 mos later and were here again heading to the machine shop thats enough playing in the mud you 2!!
@@MotorsportsMolly Lol.
Billy should wrap that side by side with his src logo.
@@MotorsportsMolly its not hard to do if u can get the wrap made. It would look really good. Put the src on the door.
Harbor Freight needs to sponsor
Cool video. Like seeing you getting your hands dirty!
Your getting taller and slimmer. Great video 😎
That is what you call oil antifreeze and rust looks like after year of setting and or submerged in the local lake,n, o thanks guys and merry Christmas 🎁 hope you had a nice thanksgiving too, we all will be hitting the gyms after the holidays, i know I can fit in my race seat ,so before next season we all we’ll need to get a lighter use of us to get it work, kool thanks BigAl.
Gotta love these...You stroke it , add aluminum heads, mild cam and 4 barrel - she will make MONSTER power - EX> My 347 stroker (302 based) makes 450 at the crank....so imagine your 351 stroked to 393...
Your engine is in good hands with the guys at CAMS!
Just started watching 👀 your channel and I really like it looks like Molly can do it all..Your boots look like the boots I wear on my Motocross bike lol...Keep those videos coming 💪
I like the way she cradled that crankshaft🤔
Cool video. The video quality is amazing. Perfect lighting.
Awesome, watch all yalls videos, Amanda is where I hang my hat
More videos miss molly👌👍love from Australia.
Being a Jessi Combs fan, it hurt when she left us. Molly would be a great one to fill her shoes. I believe that Billy is a great person and good for this relationship. With their awesome family behind them they can do wonderful things. God Bless them all and protect them! ~Ricvis
My old man built your motor on the line back in the day.
Good update/content... keep 'em coming! See y'all at The Rock for Dig or Die 💪
Bout time!!!! You have GOT to keep this content coming! LoL
It's been awhile but I'm pretty sure the heads you have still have the big valves before they went smaller towards the mid 70's, good score on that
Bruhhh.. by my Windsor. Flat top venolia pistons with good pins, ported iron Dart heads, super Victor, crane roller rockers, .625 solid roller i think its 254@.50 never been fired. It was rebuilt and assembled by Champion performance Joe soller who's a friend of mine. I think it's a 19 73 truck block
Cool, I’ve always wanted to build a Windsor. 👍🏻
Whats up buddy
@@tristanabell2117, What’s up 😎✌️
@@MotorsportsMolly, Oh I will, my bucket list of engine and car builds is long. 😄👍🏻
Good content like the teardown on 351 can't wait to see yer car out their again !
Love the shorter vids. Easy to watch
Those Moto Boots look less absorbent anyway LOL Looking good lady , keep the vids coming
It won't be long before it makes another pass! It looks like the channel is growing fast too.
Like the music you chose in this too, SICK BRAH !!!! :)
ruclips.net/video/stpqMtj_jBw/видео.html
Hi, probably already know that hardly any parts will interchange between the 302 motor and your 351 Windsor except timing chain cover. Even the distributor will have to be replaced.Good Luck👍
man I love the dogs they are so cool
Doing good girl. Keep up the good work.
Great video. Awesome the you have merch.
Good Golly Ms. Molly Talented and Beautiful!
If your planning on making big power I'd have the machine shop drill it and splayed 4 bolt main it. Your doing a great job
Not really necessary on those blocks. The block would split down the middle before a main gave out...
I love my earthquake impact from harbor freight
The first vehicle I ever drove over 100mph in I think it was 85-88 can't remember I was 15 but a ford galaxy 500 it had the 351 Windsor but my dad always talked about the Cleveland it's odd to see a build on this but imma watch
I love watching you turn wrenches on your car, but where was your safety glasses, when working with impact tools? Also, where were your shoes? Way to pretty to get messed up while not being safe. Good luck!
You were up in my neck of the woods! CAMS is like 15 minutes away
Would love for you guys to come to Indiana and do some deer hunting
Hopefully a rod doesn’t exit on the first pass. Love that car, so sharp!
Bobby ducote said he was sponsored by harbor freight. ...lol funniest shit ever
Looking good molley
That's bad ass I can relate to the old drag cars I have one of the coletti riddler car's
I thank you would be harder to bet with a AT trans I would give it a try good luck Molly I will be there for your next video
If you get a 375 stroke crank from eagle I’ve got a set of 6.3 rods with 2.100 rod journals here if y’all need um. They got 4.185 bore pistons that are to big for your stock block but the kit was a 408. Just letting ya know. Good luck💯 oh DO NOT LOOSE THE CAM RETAINING PLATE!!! Lol
the total coverage black coating is a product of the oil used . for example I rebuilt a Engine for shop class in the later 1970s . Full machine shop . Boiled block. New parts. After 3 to 6 months I decided to swap camshafts. The inside was covered just like that. What you didnt see was sludge. Switching to a synthetic will ease the black coating. more expensive by several times compared to regular oil but better in the long run. Oil leaks will make you cringe when you think about how much money just hit the ground but better.
the build up in the water jackets is probably from additives used for stop leak. all kinds of wacky questionable stuff was available over the shelf at parts counters. some of it should never be anywhere near a coolant system
Cant wait to see this motor get finished is that by chance a mexican block ? The early Windsor blocks were better then later ones.
Like to see the females get the hands on stuff...all the power to ya
You go girl show them all up
There isn’t anything better than a woman driver that works on there car
Surprised you didn't use a later roller lifter 351W engine--they're cheap enough and avoid the annoyance of flat tappets wiping out the cam due to not enough zinc. The heads also cool off the exhaust ports better, even though you won't use them, they can sell better to get some money back. Pulleys are easier to pull when you cut the belts off and lose tension. As for unscrewing that power steering pump, do the bottom bolts first since the top will hold the weight so they won't be under tension if the top bolts get taken out first and fight you. I prefer hand tools since you can feel when a bolt is about to snap off in the block and try something different.
Another source for affordable good tools, when you live in a population-dense area so you don't have to rely on mail order to do your car....flea markets, garage sales, and estate sales. Every Sunday morning I take an hour drive on backroads to an old mill building (can still smell the dust and age) where all the pickers sell machine-shop quality stuff for low prices (since everyone does EvilBay now).
Their stuff isn't shiny, but it was built back when good quality metal was used (and weighs appropriately). That brand name stuff you buy now, its made down the road from where Wal Mart gets its in-house brand made.
Jobs are less like work...when you have the right tool. Like hammering off that lower crank pulley, there's specific tools that would do that for you and not risk damaging the crank snout. Or when you need to prybar off a cylinder head and don't want it denting the concrete floor below your toes, loosen the head bolts but don't remove them--they'll keep it from sliding off the block's deck.
Great content Molly, need more lol
My uncle mustang is on that wall with the other pictures, CAMS just did are 351 Cleveland
Love this channel. That Pony is going to F L Y!!!!
You win dude , she wins couse you will be doing anything for her and she is a real woman beautiful 👩🦳too and wears MX boots 👢 nice kool and beautiful all rolled up into the big picture, thanks BigAl.
I've had 3 351W engines and they were all good engines. One of which went over 300,000 miles.
Hot young lady and fast cars. You will have a million subs in less than a year.
Love your videos lm a big fan.
Such a beautiful girl that Love's doing the same sports I do and she's a badass mechanic ❤️😍