I just bought a 2017 FPIU. My menu setting seem very limited in regards to what I can see about the vehicle including idle hours. I ordered the forscan usb module but was wondering where do I go in forscan to enable more setting in the vehicle menu?
Hey man just picked up a 16’ utility interceptor and have been paying attention to a bunch of your videos great content appreciate the effort… what can you tell me about getting the fog lights to work?
Love the video, I do have a question, so Reid had to go to the dealership for them to get his vehicle to “see” the hood switch, how were you able to do that? (do forgive me if you said so in the video I rushed through since I was on my way back to work from lunch) do you think it was because of the different kits that yall used?
Edit: It seems that the 2016s do not have the hood switch option listed in the body control module. 2017+ should be fine. Not sure what issues he ran into. I did not mess with the perimeter alarm, and I changed enabled the hood switch and remote start in both the BdyCM and IPC modules. I did it all with Forscan, although I do have an IDS on the way to start messing around with some other advanced settings.
will you be releasing a comprehensive video on forscan for this car? i have forscan and i wanna do some AS-built programming but im scared id like to disable the police trunk enable drl honking on lock and unlock basically anything that can add some creature comfort back to this car would be nice
Did you consider Easyguard brand before settling on Start-X? Would be nice to get remote start and push button start. And a modern looking fob. Curious if anybody watching this has any experience with Easyguard. For the price it seems too good to be dependable.
As much as I would like a modern key fob, I wanted to go with as much "plug and play" of an option as I could. Start-X was the best option as I could find for the price.
If equipped, no it shouldn't. It only works when the key is in the on position to activate. The harness used didn't have a key switch harness so it should be fine.
I need some help. I have everything installed with this system but when I go into the bdycm module there is no hood switch option. The ipc has it so now I’m not sure what to do
If it is not showing up in Forscan then you either need to take it into the dealer to enable or figure out what the AS-Built settings are to change it manually. I just looked over the spreadsheets I have and did not see one. I can try to figure out what it is by going into my AS-Built but it may take a day or two.
@@depolicify Any help would be very appreciated. I’ve been looking through the forums and some people are saying you’d need ids to change it but I find that hard to believe but I do not know. Thank you
@@depolicifygreat thank you so much for the fast response, attempting this tomorrow 🙏🏽 Will the 99 dollar module bring the remote start settings to the cluster or does that get enabled in forscan ? On a 2017
Wonderful video. It worked exactly as you guided me through it! Following with your other videos, and it's been a lot of fun.
thank you super helpful
Please do sync 3 upgrade 🙏🏼
I just bought a 2017 FPIU. My menu setting seem very limited in regards to what I can see about the vehicle including idle hours. I ordered the forscan usb module but was wondering where do I go in forscan to enable more setting in the vehicle menu?
Another good video
Awesome video! I’m still interested in that grille!
I'm Still planning on it. It is currently -12 F so im trying to avoid most of the work until its warmer.
Hey man just picked up a 16’ utility interceptor and have been paying attention to a bunch of your videos great content appreciate the effort… what can you tell me about getting the fog lights to work?
Video will be out in the next couple months. I am sourcing parts right now.
Love the video, I do have a question, so Reid had to go to the dealership for them to get his vehicle to “see” the hood switch, how were you able to do that? (do forgive me if you said so in the video I rushed through since I was on my way back to work from lunch) do you think it was because of the different kits that yall used?
Edit: It seems that the 2016s do not have the hood switch option listed in the body control module. 2017+ should be fine.
Not sure what issues he ran into. I did not mess with the perimeter alarm, and I changed enabled the hood switch and remote start in both the BdyCM and IPC modules. I did it all with Forscan, although I do have an IDS on the way to start messing around with some other advanced settings.
will you be releasing a comprehensive video on forscan for this car? i have forscan and i wanna do some AS-built programming but im scared id like to disable the police trunk enable drl honking on lock and unlock basically anything that can add some creature comfort back to this car would be nice
Yes I have a video in progress
Did you consider Easyguard brand before settling on Start-X? Would be nice to get remote start and push button start. And a modern looking fob. Curious if anybody watching this has any experience with Easyguard. For the price it seems too good to be dependable.
As much as I would like a modern key fob, I wanted to go with as much "plug and play" of an option as I could. Start-X was the best option as I could find for the price.
Great content as always. Thank you! How is the range with this remote start?
So far so good, I will be testing it more in the coming weeks and will post my findings in the description.
@@depolicifydo you know how to extend the range for a 2013-15 PIU?
Yes, you need to purchase an antenna. I have one and will be doing an install video soon.
Does this kit affect the factory secure idle function at all?
If equipped, no it shouldn't. It only works when the key is in the on position to activate. The harness used didn't have a key switch harness so it should be fine.
I need some help. I have everything installed with this system but when I go into the bdycm module there is no hood switch option. The ipc has it so now I’m not sure what to do
If it is not showing up in Forscan then you either need to take it into the dealer to enable or figure out what the AS-Built settings are to change it manually. I just looked over the spreadsheets I have and did not see one. I can try to figure out what it is by going into my AS-Built but it may take a day or two.
@@depolicify Any help would be very appreciated. I’ve been looking through the forums and some people are saying you’d need ids to change it but I find that hard to believe but I do not know. Thank you
@@killiantillman1385 Send me an email at 3dub200@gmail.com I think I have the info you need now.
@@depolicify i have some problem, any idea?
Is it a 2016?
Does it matter which order I do this in? installing on forscan / installing remote start module?
Nope, as long as they both get done.
@@depolicifygreat thank you so much for the fast response, attempting this tomorrow 🙏🏽 Will the 99 dollar module bring the remote start settings to the cluster or does that get enabled in forscan ? On a 2017
It requires forscan. @@davidalmeida639
Struggled so hard trying to unplug that obd plug that I gave up for the night lol