Hey, use 2 stroke for the fuel mix, this is the oil that needs to go in the engine and be burned with the fuel. Some have a separate fuel tank for 2 stroke oil and some you have to mix it yourself. For the engine, a 2 stroke gearbox still needs oil. I’d use 4 stroke motorbike oil for in here.
Ok so basicaly, i have a moped with am6 motor, and i dont know what oil should i pour in. When i looked on the net i foundthat it needs 10w30 but others put 10w40
@@TwoWheelTorquehi I've seen u used 4 stroke gearbox engine oil I was gonna put 2stroke engine oil in I have same engine with big bore kit on 98cc racing carb but I was going to put 2 strike or is 4 stroke engine oil better ty
i need help... how much oil have you put in your bike? i have an aprilia sx 50 and its meant to hold 650ml, but when changing it, it only held 450ml until coming out the overflow... do you know any help/advise?
Just use 2 stroke gear oil 10w-40 or something else. change or check every 5000 km. or 1 year. Just fill a bit more than the overflow 650 ml is enough. Good Luck
always off. warm up first to make oil flow out faster. because this oil doesn't reach the combustion chamber, its worth replacing less frequently but with a higher grade oil. On a 2 stroke engine i would prioritise a high grade 2-stroke Oil
Right I need help, recently bought the same bike, but in all honesty I have no idea what I'm doing as its my first one. I get this part fine no problem. But I have 2 tanks (? I guess they would be called) up the front left hand side of the bike under a panel. One slightly smaller looks like it has water in and the other has what I'm guessing is 2 stroke oil? Is this right or am I doing this all wrong?? Please help :,)
The tank up front left with water in it, is for the water cooler, that cools your bike. the other tank is under you wich is as you say is fuel with oil mixed in.
![Lil Uzi Vert - We Good [Official Audio]](http://i.ytimg.com/vi/DrSfBULAsek/mqdefault.jpg)
Thanks, very helpful video. Now I could replace oil in my HM moto.
Is this the one getting into the engine while it burns the gas? Or is this for the clutch only?
+mEtzG3rX clutch and gearbox only.
Hello I need to fill until it comes out the oil level overflow right?
Hi yes you do :)
Hi im confused sorry ive seen comments about 2 stroke or 4t engine oil which is best to use plz tia
Hey, use 2 stroke for the fuel mix, this is the oil that needs to go in the engine and be burned with the fuel. Some have a separate fuel tank for 2 stroke oil and some you have to mix it yourself.
For the engine, a 2 stroke gearbox still needs oil. I’d use 4 stroke motorbike oil for in here.
Is castrol power racing 1 2t oil good for it? I have to change my clutch so i got to buy oil too
No you’ll need a 4 stroke oil not 2 stroke. 2 stroke is to be burned with the fuel, either pre mix or automatically mixed in a separated reservoir
Ok so basicaly, i have a moped with am6 motor, and i dont know what oil should i pour in. When i looked on the net i foundthat it needs 10w30 but others put 10w40
Where are you living? If you’re in the UK you’d be fine on either.
Is it 2 stroke?
@@TwoWheelTorque i live in Latvia, its in europe, and yes my moped is 2 stroke
In Latvia I would go with 10w30 as it doesn’t get too hot or too cold
@@TwoWheelTorque thanks! Thats hreat to hear, because i had 10w 30 already bought
@@TwoWheelTorquehi I've seen u used 4 stroke gearbox engine oil I was gonna put 2stroke engine oil in I have same engine with big bore kit on 98cc racing carb but I was going to put 2 strike or is 4 stroke engine oil better ty
Did you use 2 stroke or 4 stroke oil
4 stroke oil inside the engine. Effectively this lubricates the gearbox and crank.
i need help... how much oil have you put in your bike? i have an aprilia sx 50 and its meant to hold 650ml, but when changing it, it only held 450ml until coming out the overflow... do you know any help/advise?
Just use 2 stroke gear oil 10w-40 or something else. change or check every 5000 km. or 1 year. Just fill a bit more than the overflow 650 ml is enough. Good Luck
is the bike straight or on its stand? Sometimes the bike is meant to be on its stand not straight up. Check your stand is fully out
so should I put castrol power1 racing 2t to my aprilia sx 50?
i noticed u put 4t oil
ekieklund274 No always use 4t oil in the gearbox and clutch chamber, Castrol racing power1 4t is the best oil to use in my opinion
Whats the name of this song?
is there a separate draining method and oil for the gearbox?
+Sam Ironside yes.. that's shown in this video..
I used about 800 mililiter. I used a funnel and i sat on the bike while filling to keep it straight.
where does the gear oil go
Basically have this identical bike lol but mine has a rs engine I
Do you keep your Engine off or on while replacing.
always off. warm up first to make oil flow out faster. because this oil doesn't reach the combustion chamber, its worth replacing less frequently but with a higher grade oil. On a 2 stroke engine i would prioritise a high grade 2-stroke Oil
Right I need help, recently bought the same bike, but in all honesty I have no idea what I'm doing as its my first one. I get this part fine no problem. But I have 2 tanks (? I guess they would be called) up the front left hand side of the bike under a panel. One slightly smaller looks like it has water in and the other has what I'm guessing is 2 stroke oil? Is this right or am I doing this all wrong?? Please help :,)
The tank up front left with water in it, is for the water cooler, that cools your bike. the other tank is under you wich is as you say is fuel with oil mixed in.
when do you know its at the correct level
Mikkel Vallesholm it leaks out of the overflow hole
@@klawz1801 When the bike is upright on a stand, or when it's on the kickstand?
Che Guevara I usually do it upright, or just put in 600ml without using the overflow hole
@@klawz1801 Thank you so much, I didn't expect a response on a comment this old. Cheers!
Che Guevara haha no worries 👍