CNC Controllers Built Incorrectly (Volume 20)
HTML-код
- Опубликовано: 11 сен 2024
- This video covers a RUclips content creator/influencers covering CNC CNC controllers they built on their channels.
Please due your research before following any content creators video as the content they produce are for entertainment, and best practices are seldom followed, or understood.
If you have questions, or require quotes please message me direct at Storm2313@gmail.com or through my eBay store here. www.ebay.com/s...
Please do your own research before making any purchase for production robotic components. When in doubt ask, and I highly recommend messaging a vendor to test their response time.
Below is a link to my CNC components that support the issues covered in this video along with other products to support your builds.
CNC Power Supply 48v 12.5a (600w) With Built In EMI Filter
www.ebay.com/i...
Zippy VW1 (IP67 Rated) 3 Waterproof CNC Limit/Home Switches
www.ebay.com/i...
Zippy VW1 (IP67 Rated) 4 Waterproof CNC Limit/Home Switches
www.ebay.com/i...
Here's a link to my Ethernet Smooth Stepper turnkey package www.ebay.com/i...
Here's a link to my UC-400 Ethernet Turnkey Controller package www.ebay.com/i...
CNC 18/4 Double Shielded Pre-Built Motor Cable With All Required Connectors
www.ebay.com/i...
CNC 18/4 Double Shielded Built Motor Cables (3) With Dual GX-16 5 Pin Connectors
www.ebay.com/i...
CNC 3-18/4 Double Shielded Pre-Built Motor Cable & GX-16 Filtered Connectors
www.ebay.com/i...
CNC 18/4 Double Shielded Pre-Built Motor Cable & GX-16 Filtered Panel Connector
www.ebay.com/i...
CNC Double Shielded Breakout Communication Cable (Gecko Drive, Onefinity CNC) www.ebay.com/i...
CNC Cooling Fan 30-48v 60mm x 38mm (65CFM) Tool Less Mount, Fan Grill, & Filter www.ebay.com/i...
CNC Cooling Brushless Fan 30-48v 60mm x 38mm (65CFM)
www.ebay.com/i...
Terminal Splitter Kit For A/C Input 110v/220v (Gives 12 Outputs To Split Power) www.ebay.com/i...
This is my DS Flexion (Ultra Flex) cable.
CNC VFD Cable 10ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw www.ebay.com/i...
CNC VFD Cable 15ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw www.ebay.com/i...
CNC VFD Cable 20ft 16/4 DS Flexion For Spindle .8Kw 1.5Kw 2.2Kw 4Kw 4.5Kw
www.ebay.com/i...
This is my standard 16/4 double shielded spindle cable. (If you're using a cable chain, then my DS flexion cable should be used)
CNC VFD Cable 10ft 16/4 Double Shielded For Spindles www.ebay.com/i...
CNC VFD Cable 15ft 16/4 Double Shielded For Spindles www.ebay.com/i...
CNC VFD Cable 20ft 16/4 Double Shielded For Spindles www.ebay.com/i...
CNC VFD Cable 30ft 16/4 Double Shielded For Spindles www.ebay.com/i...
Here's my 22/2 double shielded accessory cable.
CNC Double Shielded 22awg 2 Lead Cable (20ft.) (Bullet Proof Protection)
www.ebay.com/i...
CNC Double Shielded 22awg 2 Lead Cable (30ft.) (Bullet Proof Protection)
www.ebay.com/i...
CNC Double Shielded 22awg 2 Lead Cable (100ft.) (Bullet Proof Protection)
www.ebay.com/i...
Here's links to the GX-16 prewired connectors discussed in the video.
CNC GX-16 3 Pin Male Panel Mount Connector Wired Silicone Leads & EMI Filters www.ebay.com/i...
#PlasmaCNCScreenSet #Mach3Tools #CNCMachining #PlasmaCNCUpgrade #CNCSoftware #Mach3Plasma #AdvancedMachining #PlasmaCutting #MetalworkingTech #CNCOptimization #PlasmaCutters #PrecisionMachining #Mach3Enhanced #DigitalFabrication #CNCCommunity #EngineeringSolutions #MachinistLife #AutomatedCutting #IndustrialTechnology
Love these videos, learning a lot! Thank you, Vince and greetings from Bulgaria!
Thank you for your support, and kind words. I'm glad to help! Vince
Soldering the wire ferrules onto a connector is very feral behavior.
Jokes aside, that’s unbelievable.
Thank you for your support, and you are so right. Vince
I built my CNC router some 15 years ago that ran Mach3 and Windows Vista! (Yeah I know) .. However it worked very well for me for 14 of those years. Had a driver fail last year and finally decided to upgrade and bought parts for a Mach4 Windows 10 And Network smooth stepper system, (vdf and 2.2k china spindle etc ) This is the best I can afford atm , all doubleshielded cables, grounded and ferrites on incoming and outgoing signal / step directions etc.. I will finally get to building it this year and your videos are a fantastic resource, so thankyou for pointing out potential pitfalls and educating us all further... if you have a chance could you set up a play list with all these cnc controller fails in ?
Thank you for your support, I really appreciate it, and will certainly build the playlist for you. Thank you, and have a great weekend! Vince
Great content, so much to learn. Thank you!
Thank you for your support. I really appreciate it. Vince
Great to meet you guys today at Harbor Freight! 😊
I'll check out your channel and sub.
Valerie, thank you for your support. I really appreciate it! We will certainly see you again. Thank you,
Vince
5:51 I realize that he’s going through drivers like candy 🍬
4:36 “This ‘axe multi tool’ you see in the video is a marvelous substitute for removing this pesky rubber from my copper metal, bonjour!” 🤦🏻♂️
:) thank you,
Vince
Vince could you walk through a bunch of really good builds sometime?
Hey Paul, thank you for your support. Here's a video of one that I covered a while ago. ruclips.net/video/QBZUgkk921Q/видео.html
Thank you,
Vince
Yes this please!
Good Video :)
Glad you enjoyed it! Vince
Thumbs up for another good video.👍
Thanks 👍I always appreciate the support! Vince
4:54 OMFG that poor aviator! I hope he doesn’t have to do this more than necessary it is painful to see. 🤮
why don't they just use a g540 with a parallel port and a 48v PSU it's so simple.
You're so right, but for many of them it seems to be to make a point on their channels to make a whole controller for around $200. Its always about content, and cheap sells. Thank you as always for your support John! Vince