How To Render wall, one finish, beginners guide - DIY

In this step-by-step tutorial, learn how to finish your exterior wall using the “one-finish” method. This method some might find more cost-effective
For questions and inquiries: [e-mail]

[@evertonsamuels9869]

Love how u just get stright to the point and good display of work

[@CenterPointConstruction]

True

[@desmondford788]

If I knew this I would have saved a lot of money, thanks for showing me this man.

[@delbertwilliams1176]

💯💯 sponge it after for an even smoother finish.. if needed

[@user-ip6km1os6s]

Great 👍 idea and advise. All the way from South Africa ( Cape Town)

[@kirkbennett3391]

Big up yuhself Randy! Nice work man… very demonstrative and informative

[@CenterPointConstruction]

Very

[@hildablake-johnson6879]

I am doing flash and rendering on my house, did not know that it could be done like that, thanks for the tip, I will be watching for more,

[@CenterPointConstruction]

Money saving tip

[@waynesmith3494]

Link up wear our you? I have a job for you ok

[@marvalyntracey9044]

Your demonstration is so pure and let it look so easy

[@rgconstruction5288]

thank you

[@CenterPointConstruction]

True

[@1human179]

The work men that did my house didn't give me this option. That's crazy. Thank you so much.

[@rgconstruction5288]

ur welcome

[@deechin4704]

Thanks for this video, very clear!!! I am currently doing a room, and there are a few concerns, so I started a search, and happy I came upon your video!!!

[@tonytony3491]

Very technical, good job

[@evanderwatson5007]

I'm not ready to do it on my house as yet but good to get the knowledge from early

[@makelifegreatwiththemckenz1937]

Just bought a load of this sand,im about to rough cast my house now,thanks for sharing

[@shellecemeggie7326]

Thank you for sharing this video 😊

[@jamaicanpatwah5170]

Good video bro, your commentary was very detail i like it!👏

[@demornybaker8967]

You really know your stuff bro, I've shared it with my construction groups.

[@Bugga1156]

Very good work

[@crystallewis4962]

Thank u. this is what I will be doing on my house

[@rgconstruction5288]

ur welcome

[@defusionus]

Liking the tutorials. Would have loved to see how you mix (mix ratio, and what type of shiv you used) the cement and sand to make the rendering mix to flash. Looking forward to seeing more.

[@andremunroe5737]

You mix it the same. 1 part cement, 3 parts sand. I would say you could put a little granite sand into this mix to get it even smoother. He could also do some sponging to smooth even more. But great video.

[@namkebanyanklariti]

Thanks for the money saving tip

[@kojomensah7474]

This goes to show that we are one for the method that you are using it is the same in black africka no differences we must seek to link up with those in black africka share ideas so that all can progress instead of having the mindset that no one can do something as an individual it is the only way that those of you are in the carried beyond can link back to black africka for the majority face the same problems

[@limibrown]

Very nice work❤

[@CesarLopez-gw9ps]

Good Job, good demostration. Deeply explained. Thak you good man for sharing.

[@ALAMINCONSTRUCTION]

Wow beautiful working

[@michaelferguson5798]

Great video bro !

[@trevor100ify]

Good Job

[@kanvers4699]

Very helpful and informative…. Thanks

[@rgconstruction5288]

ur welcome

[@mariasproducts2186]

I am getting ready to build .I am ready to learn .Thank you

[@CenterPointConstruction]

Him save you money.

[@DeLifeOfaNanna]

This is new to me, I must ask my builder about this

[@camb2810]

Okay I need to try and do a one finish.

[@Guilty__1453]

The white sand neat too when it’s done in this one finished
Can also get a finer mesh and use the same white sand and do showel-on

[@user-gr3pv9tn2q]

We know it all.in Belize thanks bro

[@donnadixon6626]

This is great

[@desmonddaley427]

I love this

[@ramonegreen1556]

Nice work bro

[@rgconstruction5288]

thanks bro

[@newtoncampbell6160]

Iam reato do the inside of my house. Can I do a one coat render and if so how should it be done .thanks

[@desmonddaley427]

Good job

[@barbershango5317]

U know the job bro trust me

[@mariasproducts2186]

This is awesome display your skill my brother

[@rolandhutton5608]

Thanks bro for that good information.

[@rgconstruction5288]

ur welcome

[@lwjunior2]

Thanks Boss. What's the right mix of sand, concrete and water? Where can you get that type of sand?

[@rgconstruction5288]

anywhere that sell sand yu can ask

[@DixonFamilyJa]

Looking lovely. Good job 👍

[@prestonsimpson3539]

Great job I like it where are you located.

[@rgconstruction5288]

Mandeville Manchester

[@kevinmorris4560]

Like what ur doing .real talk

[@kayhibbert2494]

Looking good 👍

[@radeshadaley6341]

Help full

[@dreawiferollgellagella6041]

Love how it's looking , and I don't see the complete work

[@richardlongmore8979]

Great job. Can you give an idea if the cost per year for this one finish method. And your contact

[@rgconstruction5288]

1,000 per yard

[@godblessfamily3160]

Love it only thing lot of material wasting there you must be considerate of the builder also

[@lennieadi]

Great share and good commentary dear sir. Where are you based and do you read engineering plans on the blueprint? 👊🏾🇯🇲

[@rgconstruction5288]

yes I can read the blueprint that's what I do for a living, and am from Mandeville Manchester

[@lennieadi]

@@rgconstruction5288 . Oh ok great thanks. I think I need someone closer to browns town to save cost. I need foundation set out next year and steel work.

[@ricodane7567]

@@rgconstruction5288 I need someone that does good work around the Linstead area to save on cost.

[@rgconstruction5288]

@@ricodane7567 ok cool

[@rgconstruction5288]

@@lennieadi ok cool

[@evertonsamuels9869]

Love this .

[@hyborasta9157]

Nice job

[@DeLifeOfaNanna]

I think would be nice especially if you are using shovel on and stucco. What do you think?

[@CenterPointConstruction]

This is perfect for it or if you are going to stone finish as well

[@kingsquire1270]

Thank you

[@rgconstruction5288]

ur welcome

[@UnknownTvCom]

Can you do one finish on the inside as well?

[@thebennettfamily5739]

Nice work brother I just subscribe to your channel

[@rgconstruction5288]

thank you

[@thebennettfamily5739]

@@rgconstruction5288 your welcome

[@mrbakklesworldwidesinger4370]

Yea right desso

[@CenterPointConstruction]

Long time I was mentioning it to my mason...smh thanks for being honest

[@kiddosample1815]

I like this idea

[@moyanderson3061]

Fam afternoon what's the cost per square yard to one done.Am building right now.
What about scanti how u chang per running foot

[@beverlymyrie9455]

So you can towel on at the same time?

[@rgconstruction5288]

no

[@cuhyah9661]

Do you have a video on the best way to mix the mortar?

[@rgconstruction5288]

soon

[@tanyagarnett9738]

Thank you for you help

[@krehgotv1344]

Whats the mixture ratio sand cement

[@makelifegreatwiththemckenz1937]

Do you sieve this sand before using

[@rgconstruction5288]

no I don't just used as is

[@myrtecampbell7083]

Can this process be done on the inside as well?

[@rgconstruction5288]

No I wouldn't recommend it for the inside because it's a bit rough

[@CenterPointConstruction]

You can but use the rendering sand instead

[@shastabrown4605]

Can this be done on the inside and paint as a finish wall??

[@tanyagarnett9738]

Was inspired by use trying to do fence wall keep me in prayer .I am a women doing a man job.

[@ianpaige1880]

Do u siv the sand before u mix the cement ?

[@rujayreid3592]

What is in the mixture ? Only cement and the river sand?

[@rgconstruction5288]

yes only cement and sand

[@tanyagarnett9738]

Good day I could really use a hand right now I think maybe bite off more than I can chew.

[@WayRoo34]

Nice, can't you just paint this after, instead of doing total wall after? Looks like it gives the same finish and one less step

[@rgconstruction5288]

Yes you can yes you can paint it after you do the one finish

[@WayRoo34]

@@rgconstruction5288 Perfect!

[@kemar1150]

What’s the cost to do this vs rendering? I asked my contractor about this and he said it’s the same cost as rendering the wall.

[@rgconstruction5288]

same money but yu save on material that the difference

[@rasheedmatheson1890]

Usually I see them wet the wall before

[@rgconstruction5288]

Yes that's when you are doing rendering but this is not rendering

[@Frecklesconstruction]

How wide should your cordline be from the wall, is that 1 inch or it depends on the quality wall?

[@rgconstruction5288]

The quality of the wall decide how wide the cord will be

[@json309]

How much per square yard to do that

[@ianpaige1880]

Can u paint over that finish?

[@rgconstruction5288]

yes you can

[@OneGrainYT]

Why didn't you wet your wall for a better finish and less chance of wall cracks.

[@rgconstruction5288]

Because it's one finish I'm not render that's why I didn't wet the wall

[@paulbernard3633]

Good option .. are u free to do some work ?

[@rgconstruction5288]

yes I am

[@Gta-zq4vg]

That means u cannot paint it

[@raferjohnson]

How do we get in touch with you?

[@rgconstruction5288]

[e-mail]

[@rgconstruction5288]

you can reach me by that email

[@rgconstruction5288]

sorry for the late reply here is my email [e-mail] you can contact me

[@user-cs6jn9cy2j]

How to reach you

[@rgconstruction5288]

[e-mail]

[@rgconstruction5288]

[e-mail]

[@dannyperkinstv1828]

Good job