Estimation using Centerline Method (Part 2) of residential building

In this part quantities of Earthwork in excavation, bed concrete in foundation, foundation, Damp proof course, brickwork in superstructure, lintel and roof slab has been shown in detail, plan consists of two different wall sections, 30cm wall which is main wall and 20cm wall known as partition wall, so how to tackle problem when theere are two sections is shown in this video.
As video would get longer so we have stopped till roof slab, Part 3 will cover remaining quantities of the residential building.
Estimation using Centerline Method Part 1 : • Estimation using Cente...
Estimation by LongWall Short Wall Method : • Long Wall Short Wall M...
My Phone : amzn.to/311uFDW
Amazon Basics 50-Inch Lightweight Tripod with Bag : amzn.to/3ayCdkG
Laptop : amzn.to/3hi2yGp
Estimating and Costing by B.N.Dutta : amzn.to/2Eanu3c
Estimating and Costing by Rangwala : amzn.to/31X7gTi
#centerlinemethod #estimationofbuilding

[@mdifrazlalamiya3199]

I have passed my subject by watching your video thank you so much.

[@allfooballgoals]

Thanks Master for the lecture series. Of all topics in civil engineering I have been having trouble with quantities, but with this at my fore front, I can tackle any problem at hand.
Secondly make some more videos on pitched roof, gable end roof, top soil removal before foundation earth work, labor cost calculations, retaining structures, and box culvert analysis and Design. Since this is all about structural analysis and design channel.
May God bless as you through that master....

[@jibachhsahani3087]

Thank u sir,very helpful videos for understanding concept to calculate the quantity of all particular work..

[@structuralanalysisanddesign]

You are most welcome, keep sharing and watching

[@ranikrishna8902]

Thank you sir for sharing ur knowledge with us.

[@structuralanalysisanddesign]

It's my pleasure, we are glad this video helped you, keep watching and all the best

[@vvenkat2789]

👍

[@ashokkumaryadav6477]

Thanks for your patience.

[@structuralanalysisanddesign]

You're welcome, all the best

[@theekhaibhai8998]

Superb sir what an explanation

[@vishweshv.s6731]

Thank you soo much sir.... Love from karnataka 💓

[@structuralanalysisanddesign]

So nice of you, All the best, keep watching and sharing

[@fazil3153]

thanku so muc sir for these vedious

[@ramboiitg]

Wht a lecture.. sir , I regard u a real guru

[@structuralanalysisanddesign]

Thank you Avijit for this respect

[@sivaarnepalli4872]

Great explanation Sir ❤️👌👏.....

[@structuralanalysisanddesign]

Thanks and welcome, keep watching and sharing with your friends

[@namratan3333]

Thankyou sir 🙏

[@prabhuswami2034]

Tank u sir it is very helpful of exam purpose again Tanks for teaching 🙏

[@structuralanalysisanddesign]

Always welcome, all the best, keep watching and sharing

[@shahnawaz_83]

Brilliant sir jee

[@aadeshkumar9848]

Very helpful vedio thanks sir isi building long wall short wall vdo bhi bnao

[@fairhomes]

sir , one doubt , we are using isolated footings only in India ,, this video method calculates for raft footing sir ,, we are not excavating for whole length of the wall instead we excavate only in footing area .

[@dineshsellathamby9263]

Great explanation sir

[@structuralanalysisanddesign]

Thanks and welcome

[@tastybuds8008]

Sir when plus joints coming in the problem what we do

[@manumathai6241]

Sir plese tell, Step stone masonry how 7.85 will came there on last step?

[@rrconstructions6756]

thank you sir

[@structuralanalysisanddesign]

welcome

[@alphinbasheer1207]

Thanku sir😊keep going, do more problems

[@structuralanalysisanddesign]

Welcome, keep watching for more civil engineering videos

[@Robin-sx5nv]

Hello sir why ventilator is not taken in lintel deduction

[@naveenkumar-dd6bz]

Dear sir kindly share the link of part 3..
And I m really appreciate your way of explaining.. keep it up sir..

[@structuralanalysisanddesign]

Thank you Naveen, Link of Part 3 ruclips.net/video/eigqLHcRofg/видео.html

[@nijiraj7367]

Thanku so much ..

[@structuralanalysisanddesign]

Most welcome

[@hracam2300]

Part 2 👏👍

[@structuralanalysisanddesign]

Thanks for watching, please go through part 3

[@ramboiitg]

Sir plz upload the part 3. I am eagerly waiting for part 3

[@structuralanalysisanddesign]

It is already uploaded, please check it

[@archions1979]

Sir. what about T- Junction. Should consider it or not. Please clarify

[@satishm8251]

super sir

[@structuralanalysisanddesign]

Thank you so much, keep supporting

[@ayshathanseena2631]

If brick work in superstructure is given diffrent for main and partition
Which value of a wall to be taken

[@structuralanalysisanddesign]

This is already explained, main wall is 0.3m and partition wall is 0.2m

[@21siddheshgurav78]

Is there any deduction required of Doors for DPC QUANTITY ?

[@urdustories6422]

depending on the placement of doors or if dpc is below the dow then no deduction but dpc is place between the door wall then yes

[@khayum009]

Cool ...

[@structuralanalysisanddesign]

Thank you, keep sharing

[@khayum009]

Can you guide me to a video for RCC estimate..

[@UETLHRCED15]

door 🚪 correction in dpc ?

[@akshaystallone2230]

Sir. what Is steel quantity for RCC slab ?

[@abumohammad4045]

dear, excuse me , can you tell me the name of your book? thanks.

[@elizabethkumbalanghi1517]

Thank you sir but lwant full item of quanty estimte calculation work out :thanku sir

[@civil.40.vaishnavipatil]

Sir which height we have to take

[@sanjaymg6866]

And one more in dpc calculation the nominal height is .0.15m in calculation u didn't consider the value of dpc height plz explain that one

[@prabum5523]

Sir I am my plan copy, please send steel requirements.

[@kumarigunjadevi6947]

Sir Centerline method ellidce banye sir major axics 120 ./60

[@rex2324c]

Varandha brick work deduction ?

[@prithvinmurthy6800]

Great explanation sir.
And which is the book that you are using in this video ?

[@sujalsapkota6875]

Depth of excavation for 30cm and 20cm wall are different which you have considered in depth but not while calculating length because the bottom of 20cm wall (0.7m) meet 30cm wall at 0.6m thickness not 0.9m thickness.
Edit: I found that width was 0.9 due to excavation. Thanks for the video.😌

[@structuralanalysisanddesign]

Thank you so much for patiently watching, kindly share our content with your friends

[@purveetrunwal5024]

Is the quantity of excavation = 49.7m3

[@shaheelwazer7700]

Brick wall calculation in Cubic meters? Is this calculation comply with the SMM?

[@ceshubhamgupta6839]

Framed structure ka estimate sir

[@user-kg7qk9el2n]

Good explanation but writing is unclear .using bigger pen is better

[@sushillondhe7258]

Why did u take height of door (D2) 0.15 it is wrong

[@hs.markandeyahonnalisiddap5534]

Deductionforpartitionwalliswrong

[@shanu9411]

Prepare detailed estimate for the following items of work for the construction of
residential building
(a) RRM for foundation (75cm x 75cm) and basement50cm x 50cm ,
Wall thickness 20cm how can I estimate this, by assuming height of rrm and basement ??

[@EngrAbdulWakeel]

What are you doing sir 😏 where is the drawing

[@mihirvanmali6205]

Why ventilator is not taken in lintel deduction?

[@lasandaradesilva]

assuming we are not having a lintel for ventilator I think.

[@devangparmar2699]

Sir hindi ma banavo video to koi ne khaber pade

[@structuralanalysisanddesign]

Soon i will be starting Hindi Channel