Samsung Galaxy S20 FE Screen and Frame Replacement

Поделиться
HTML-код
  • Опубликовано: 27 ноя 2024

Комментарии • 49

  • @matrix-fh9tn
    @matrix-fh9tn 3 года назад +5

    I can't thank you enough for showing how to remove the battery with isopropyl alcohol. Removing battery always stressed me out because one deform damages the battery. Lol. My way was heating the back side(front lcd side) which works but your way is easier and safer. Thank you!

    • @rickstechrepairs
      @rickstechrepairs  3 года назад +1

      Just be careful with the iso around rubber and the LCD/oleds as it can warp the material

    • @matrix-fh9tn
      @matrix-fh9tn 3 года назад

      @@rickstechrepairs Great advice. I always take the battery out last after everything else is removed just in case it catches fire and burn down the whole phone. 😁
      Yes, I've done that once before. 🙈😩

    • @jeranitorres6622
      @jeranitorres6622 2 года назад

      Contact cleaner works better but also be careful around Oled/lcd

  • @andrewsuderman
    @andrewsuderman 3 года назад +1

    This was extremely helpful, just got done doing this repair right along side of you. A couple things that threw me off was my internals were a little different than yours (yes it is an S20FE), that is what the other commenter is talking about, the side bracket things. Not sure what they are for, but they did swap over no problem. My replacement was $120 from ebay and did have the battery adhesive already installed, but it did not have the thermal compound sheet under the main board, kind of frustrating. I was able to peel it up and transfer to the replacement although it did sustain a little damage, but cosmetics on that shouldn't matter. Really happy how smooth this went, thanks again!

    • @rickstechrepairs
      @rickstechrepairs  3 года назад

      glad to hear this has helped you, i do find buying online you will find a whole bunch of different quality screens and frames as you encounted there

  • @powerPowerTigerpaw
    @powerPowerTigerpaw 3 года назад +1

    Thanks, mate! Just finished fixing my phone. :)

  • @ayubowan7845
    @ayubowan7845 3 месяца назад

    Hi, I did the screen replacement OK as per the video. Screen works fine but GSM bars are almost not visible and the GPS does not work. Did a factory data reset but the problem is still there. No other issues. Any suggestions to fix this? Many thanks

    • @rickstechrepairs
      @rickstechrepairs  3 месяца назад

      possibly issues with
      aftermarket display and frame
      issues with antenna connection not being good (antenna not plugged in)

  • @okay3170
    @okay3170 3 года назад +1

    Does the colour coating on the metal frame scraps after 1 or may be 2 years of use ? Please answer

    • @rickstechrepairs
      @rickstechrepairs  3 года назад +1

      No idea

    • @jamesthefragranceguy
      @jamesthefragranceguy 2 года назад

      I've had mine in a case since I got it in April and it's already happening. So I would say yes. The coloured aluminium finish on the metal frame is very thin. Something might have scraped against it while it was in the case but it shouldn't have happened at all imho

  • @deanlebattie2495
    @deanlebattie2495 2 года назад +1

    Where do you buy the assembly

  • @er.jigneshsinhjchauhan965
    @er.jigneshsinhjchauhan965 Год назад

    Will it retain waterproofing after Applying Back frame Glue..?

  • @dorianlavergne4531
    @dorianlavergne4531 2 года назад

    In between the screen and the back cover, along the sides of the phone there is a type of medal piece. Can that one piece be changed?

  • @henrintibu
    @henrintibu 11 месяцев назад

    Thank you !!!

  • @rjrodriguez9227
    @rjrodriguez9227 2 года назад

    Is there a link to where you got yours?

  • @8peterp
    @8peterp 2 года назад

    see you're using s20 FE board for the s20 fe 5g ,is there any other deifference than the 5g antenna on the left?

    • @rickstechrepairs
      @rickstechrepairs  2 года назад +1

      The replacement frame / display is the same for the s20 Fe and Fe 5G

    • @8peterp
      @8peterp 2 года назад

      @@rickstechrepairs thanks ,just ordered G780 frame for G781 and changed. found it important to heat from the bottom a bit to around 60C to keep glue on the small 5g board when transfer ,everything else went well ,thanks!

  • @AriFashek
    @AriFashek 2 месяца назад

    I tried but when i turned on it looked very faint grey and the battery percent zoomed to 100 even though i just plugged it in. Its a black screen now but once in a while if i press power button a greyish color wil pop out with the faint 100charge will appear then turn off again. A very faint silhouette of my daughter will dhow then turn off. What does this mean.All the plugs are in correctly.

  • @robertfields4484
    @robertfields4484 Год назад

    Awesome

  • @jw3512
    @jw3512 2 года назад

    Just came across this, and for some reason seeing these repairs done, the slave cable to the motherboard looks so easy to install back on, but I can't seem to get mine to fit properly for the screen to turn on 😔 I got a new motherboard for mine and the slave cable won't fit, it's the right size too

    • @rickstechrepairs
      @rickstechrepairs  2 года назад

      odd, shouldnt be too much trick to it.
      Line up over the top of the connector
      wiggle it a little with your finger
      push down with pressure
      Should click in to position

  • @jeranitorres6622
    @jeranitorres6622 3 года назад

    Do you not need to transfer the grey and black side brackets on the top right and bottom left of screen ?

    • @rickstechrepairs
      @rickstechrepairs  3 года назад

      Not sure what you mean, at what time is it shown ?

    • @warriorz_hammer_7743
      @warriorz_hammer_7743 3 года назад

      What's the cost of the frame and screen combo?? As my S20 FE bent 🥲

    • @jeranitorres6622
      @jeranitorres6622 3 года назад

      @@rickstechrepairs the grey one is most noticeable at 11:34 there is a grey bracket at the top right hand side of the screen/frame and it’s not in the shot but there is also a black bracket on the bottom left side of the screen/frame. My bad if you did transfer it and I missed it I just look up videos sometimes when I’m not sure about something I don’t watch them all the way through usually.

    • @corey7219
      @corey7219 3 года назад

      @@jeranitorres6622 those are plastic placeholders for the 5g mmwave antennas.

    • @raymondtremblay8516
      @raymondtremblay8516 2 года назад

      Thank you for sharing this!!!

  • @adamreuben6396
    @adamreuben6396 2 года назад

    I did the assembly but when swotch on samsung logo appears then its dark after that but u can feel vibrates when u touch display, wat dd i do wrong?

  • @miriambynoe3882
    @miriambynoe3882 2 года назад +1

    i didnot have to pay n moneyyyyyyyy
    you help me so much thx

    • @rickstechrepairs
      @rickstechrepairs  2 года назад

      buy the part and follow the video and save some money

  • @tohb1976
    @tohb1976 Год назад +1

    Thanks for the video. Really helped me as I replaced my wife's cracked screen with your tutorial.

  • @onlyshorts483
    @onlyshorts483 2 года назад

    Hello there, can you tell me the cost of screen replacement of s20 fe

    • @rickstechrepairs
      @rickstechrepairs  2 года назад

      Will depend on where you get the part from

    • @onlyshorts483
      @onlyshorts483 2 года назад

      @@rickstechrepairs but the mostly probably cost is what?

    • @tatpap
      @tatpap 2 года назад

      It'll probably cost about 114 depends really