OMG! THANK YOU so much for this tutorial. I DID lose my mind.....with just enough left to scroll thru RUclips and find you! I'm all recovered now and back to my machine. You are a Godsend!
THANK YOU THANK YOU THANK YOU, a million thank yous for making and posting this video! I also got this bobbin winder on Amazon, and although like you, had no problems putting it together, I was befuddled as to how to thread it. Not confused anymore!
I had searched all over for a video on the Bobbin Winder that came with my wife's HandiQuilter Moxie. All of them were out of date, but this Himapro is the exact winder that's included with the Moxie. The owner of the shop that sold us the Moxie drove 3 hours to our house Sunday before last, spent 3 hours checking my construction and showing my wife how to operate the Moxie. But she never got to the winder as she had to drive 3 hours back home. I finally found some written instructions on the HQ website, so that helped some.
O thank you for the post I was using my all wrong. I had no idea how to use this just like you it didn’t come with any instructions I didn’t have a clue.. So thank you so very much for making this post. It’s been very helpful.
Thank you soooo much for this video. I was so frustrated with this, that it sat is a drawer for more than a year. I finally decided to find out how to use it because of the money I invested in it.
Thanks so much for sharing this! I've got a similar bobbin winder on the way and one of the complaints was that there were no instructions. This will help for sure!
You can adjust the auto-stop/how much thread goes on the bobbin. Loosen the set screw on the left, slide the plate with the "knobs" in or out to desired position, re-tighten the screw. Thanks for this video!
Thank you! Other videos I've seen on this product have such heavy accents, I can't understand. I did find some instructions that said to wind the thread twice through the tension discs, but not sure if this makes a difference. If anyone is having problems, they might want to try that.
Did yours come with the screws the instructions state to install? Mine did not and wondering if this was a returned item (purchased through amazon) or if this is the way the item is packaged. Am returning for an exchange. Thanks!
Can you wind Pfaff 6230 or 9033 bobbins on this? I don't know the actual name of the bobbins.... just that they are thinner and wide in appearance than the other bobbins
I've had that happen before with it too. That usually happens when I haven't put it on right or the tension disc seems to need adjusting. Sorry I can't help beyond that.
I have a similar winder and also lacking good instructions. If anyone is wondering what that silver piece of metal between the pink and blue button is. It’s a thread cutter. Slide thread under then pull up along the blade.
Thank you so much for the explanation how to set up. Without your video, I was about to regret buying the machine....now it works perfectly.
Glad I could help!
Thank you so much! I’ve had the hardest time trying to use mine until this video
Glad it helped!
OMG! THANK YOU so much for this tutorial. I DID lose my mind.....with just enough left to scroll thru RUclips and find you! I'm all recovered now and back to my machine. You are a Godsend!
Glad I could help!
You are a lifesaver! Thank you so much for doing this video. I had success on the first try because of you!
So happy to help! 😊
I’ve referenced your video every time I’ve used my Hima Pro, thank you!!
Oh great! So glad it helped. 😊
THANK YOU THANK YOU THANK YOU, a million thank yous for making and posting this video! I also got this bobbin winder on Amazon, and although like you, had no problems putting it together, I was befuddled as to how to thread it. Not confused anymore!
Glad it helped!
Thanks a million from me too. So helpful!
I had searched all over for a video on the Bobbin Winder that came with my wife's HandiQuilter Moxie. All of them were out of date, but this Himapro is the exact winder that's included with the Moxie. The owner of the shop that sold us the Moxie drove 3 hours to our house Sunday before last, spent 3 hours checking my construction and showing my wife how to operate the Moxie. But she never got to the winder as she had to drive 3 hours back home. I finally found some written instructions on the HQ website, so that helped some.
oh wow! That's great to know. Thanks for sharing!
Thank you, thank you!!! I was about to give up on my HimaPro, but you saved me. Thank you!
Glad I could help!
O thank you for the post I was using my all wrong. I had no idea how to use this just like you it didn’t come with any instructions I didn’t have a clue..
So thank you so very much for making this post. It’s been very helpful.
Glad I could help!
Thanks! I was having a time getting the tension right!
Glad I could help!
Thank-you, so much! I received one for Christmas and struggled. Thanks for putting out a video.
You are welcome!
Thank you so much! It was so intimidating before watching your explanation 😊
Glad it was helpful!
Thank you! This was all new to me!
I'm so glad!
Thank you soooo much for this video. I was so frustrated with this, that it sat is a drawer for more than a year. I finally decided to find out how to use it because of the money I invested in it.
Glad it helped!
Thank you so much, this is VERY helpful!
You're very welcome!
Thank you for this video. So helpful
You are so welcome!
thank you so much for uploading this!!
No problem!!
Thank you, this has been sooo helpful!
Oh good! I’m glad!
Thanks! I really needed this!
No problem
Thank you. It was much easier having seen how it’s done.
Glad it helped
Thank you! I would have thrown this thing out the window if I hadn’t found your video!
haha! I understand!
Thank you very much for the tutorial...
Glad it was helpful!
OMG, Thank you so much for your video because it did help me!
Glad I could help!
Thanks so much for sharing this! I've got a similar bobbin winder on the way and one of the complaints was that there were no instructions. This will help for sure!
Glad to help!
Just got one, very helpful.
Yay! I’m glad this video helped!
OMG thank you so much for posting this. I was about to rip my hair out…
So glad it helped you out!
Thank you!!
Of course!
You can adjust the auto-stop/how much thread goes on the bobbin. Loosen the set screw on the left, slide the plate with the "knobs" in or out to desired position, re-tighten the screw. Thanks for this video!
Thank you for your input!
Thank you! I was ready to send it back until I read your explanation! I am back in action!
Glad it helped!
Thank you
You are so welcome!
Oh Gosh!!!!!!!!!!! Thank you!!!!!!!!!!!!!!!!!!!!!!!! Uff da I was having a time with this :0
no problem!
Awesome
Thank you. It works.
You're welcome!
Thank You. Thank You. Thank You.
You are very welcome
tyvm that did the job now i can do it tyvm
Thank you! Other videos I've seen on this product have such heavy accents, I can't understand. I did find some instructions that said to wind the thread twice through the tension discs, but not sure if this makes a difference. If anyone is having problems, they might want to try that.
Good to know! Thanks
Thank you so much for this! I am mechanically challenged and the instructions that came with this are not very clear.
You’re welcome! Glad it helped
Thank You🙏🏼
You are so welcome!
Now I'm having trouble getting it to wind smoothly on the bobbin. Any suggestions are greatly appreciated 🤗
Did yours come with the screws the instructions state to install? Mine did not and wondering if this was a returned item (purchased through amazon) or if this is the way the item is packaged. Am returning for an exchange. Thanks!
You know, it’s been so long, I’m not sure but I really don’t remember any instructions.
Mine came with my BabyLock Gallant, like you, instructions how to put it together but not how to use it. Thank you!!
You are very welcome!
Thank you so much! I was ready to throw it out until I found your video
Glad I could help!
Which way do you turn the top dial if it is not giving an even vertical wind
Not sure. Idk if the dial is the cause. I noticed if the thread isn’t fed exactly right, that will happen.
Can you wind Pfaff 6230 or 9033 bobbins on this? I don't know the actual name of the bobbins.... just that they are thinner and wide in appearance than the other bobbins
I’m sorry, I’m not really sure, maybe someone else will respond here, you can always try it. Good luck!
My bobbin comes up off the spindle during winding. The thread bulges in the middle on bobbin
I've had that happen before with it too. That usually happens when I haven't put it on right or the tension disc seems to need adjusting. Sorry I can't help beyond that.
My J bobbin keep flying off... any ideas??
Hmmm, not sure. Is the Bobbin the right size? Down tight enough?
I have a similar winder and also lacking good instructions. If
anyone is wondering what that silver piece of metal between the pink and blue button is. It’s a thread cutter. Slide thread under then pull up along the blade.
There is a sensor there to auto stop the filling.
Good to know
If I could hug you I would!
I would hug you back!
Thank you I was getting frustrated
Glad it was helpful!
Thank you!❤️
You’re welcome 😊
Thank you!
You're welcome!
Thank you
You're welcome