Это видео недоступно.
Сожалеем об этом.
Cheap homemade hose clamp tool DIY - Part 1 of 2
HTML-код
- Опубликовано: 4 авг 2024
- Cheap homemade hose clamp tool DIY for making wire hose clamps. You can also use it as a binder tool and bind almost everything.
There are professional tools to buy like the clamptite and the haywire klamper. And they are faster to work with but this is a cheap and simple alternative to those tools.
DO NOT FORGET TO WATCH MY VIDEO WHEN I AM USING THE TOOL.
If you liked this video and want to see more like it, why not subscribe?
On my channel "Jola76" I will show stuffs, how to´s and DIY.
This is the simpliest way to make the most effective tool of all the video ive seen on YT ! No bullshit, no idiotic complications - just an effective and usefull tool !
👍 😃 I have watched almost all the DIY hose clamp tools and I must admit that yours has all the elements of a tool that is FUNCTIONAL, EASY TO USE and above all, CHEAP. Just a bolt, nut and a washer. Well done. BTW, some viewers have complained that there is no instructional video on how to use. Folks, check part 2
Thank you very much. Glad you liked it and thank's for watching.
part 2: ruclips.net/video/QYXVhiV8Ytw/видео.html
Thank you for your simple but effective tool.
Thanks, I am glad you liked it
So simple....and practical. Thank you.
Thank you for watching
Excelente amigo, la mas sencilla y fácil de construir que he visto hasta ahora. Gracias por compartir.
Greetings from Mexico
Excellent idea
I made one of these and it works great!
Super utile pour dix des colliers en fil de fer , formidable j'adore
Simple that. Very good.
If you put your bolt and washer deeper into your vice, they wouldn't vibrate as much. They would be easier to cut. Nice idea though. Do you have access to a small rotary tool with a cut off wheel (like a Dremel or one of the knockoffs)? Easier still.
Yes you got a point there
Very good
Superbe... Merci !
You are genius...MacGyver 😁😁😁
I just make my little tool and I try it and it works great 👍🏻
REUPLOAD the two videos as one video mate. Thumps up.
very very good, thank you so much much
Thanks Genius, just i want.
Thanks for the video but what is it that you making ?
Watch my video "How to make a wire hose clamp" and you will understand
Nice, thank you for sharing.
I looked through your channel , but i could not find the video showing how to use this tool
Hello Sean look at the end of this video.
ruclips.net/video/QYXVhiV8Ytw/видео.html
Genius, congrats and thanks for sharing! :)
Tak, du er at betragte som en ven.
Tack själv för att du tittar.
so how do you use it?
Look at my channel and you will find the video when I am using it
Jola76 instead of trying to fish for free money you could just put the two videos together. Just a thought.
+Fox. Well if it were for the money, I would not do this at all.
Jola76 no reason to split this and the video if you using it into two different videos. Only reason would be so you have 2 videos to make revenue on.
Yes I see you got an issue with people making money and that´s your problem not mine. I think it´s great that people can make money on RUclips and I am happy for those who do. If you don´t like my videos you are free to don´t look at them.
If there is any comfort for you, I can tell you that in a few days I will lose all earnings from youtube, as I have too few subscribers. But I will continue to post videos. And yes, the little money I earned was great fun to get.
But if you think you will be rich through youtube by making such videos as I do then you think wrong. Go for videos like pewdiepie. Thank you for watching.
Nice but it would be nice to see it in action..👍🏼
Look to the end of the video.
very interesting, but how does it work ?
Check out my video "how to make a strong hose clamp DIY"
Thanks ! Very clear now and congratulations. Very simple to use and easy to make. Good job.
Thank you for watching.
Простенько и со вкусом, молодец мужик
I am on the edge of my seat.
Then what ? How is your tool going to be used ?
Look at part 2
Use a butterfly nut. Looks like the washer have enough clearance.
It will not work with a butterfly nut.
Whats the point of making a video and not show how it worked.
It's part 1 of 2 videos
What its use ????????????
ruclips.net/video/QYXVhiV8Ytw/видео.html
Gostei do projeto,já fiz um para mim...valeu a dica.
I am glad you liked it
А как применяется на практике - додумай сам
Looks just about like the one I made a few years ago.
А как им пользоваться?
На гайку одеть торцевой ключ с трещеткой,и ручку смантырить.
Pra que serve isso,rsrs
А крутить гайку будет "" очень"" удобно между проволкой !!!
Check out the Original haywireklamper.com
Whats that?!
how to use it ? incomplete video ??????
Check out my video "how to make a strong hose clamp DIY"
??
Would be nice if you showed how it works.
Jack De Haan look at the notification at the end of the video or read the text under. The video how to use it is on my channel. Thanks for watching.
Videos useless without him showing how to use it.. I know what he's going after, I know how the others work, but it'd be a pain in the but trying to tighten that nut with wire blocking it on both sides.
Well I don`t find it so hard ruclips.net/video/QYXVhiV8Ytw/видео.html
Pra que serve isso???🤣🤣🤣
سير الله يعطيك الذل ضيعتلي وقتي باطل
Почему Вы так обращаетесь к автору ? Я согласен , что надо было сказать два ролика !
Автор показал как сделать из под ручных средств дешего и сердито !
Вот смотрите ,в первом ролике показано как сделать инструмент и многие понимают как он работает . Для тех кто не понял ( например Я ) в первом ролике как пользоваться , может перейти на второй ролик !
Парень гениально придумал , принес пользу для общество .
Такой чел заслуживает благодарность !
Парень показал начальную базу ,а там можно переделать под свои цели и задачи . В общем изобрел велосипед - можно так сказать !
Брат Вы не правы , нельзя так сразу судить .
Спасибо автору за ролик !
No mostró para que sirve esa vaina quede en lo mismo
Omg, that Not can Work.....
Что за хрень, а как оно это чудо работает???
Look at the Second part.
Где тест ептваюмать.
Pésimo pésimo pésimo
Have you tried the tool?
It will didn't work.. it will twist only the wire..
Then you are doing it wrong
This is the worst one I have seen / made. All the others are a lot faster, and easier to use. The only advantage is that this one is really easy to make, if you don't have a drill press or a lathe.... : (
And cheap.