More important than pretty welds a pro can build a frame that will ride straight and not snap in half and kill you. Not dying is always a good thing. 😊
Chey, this was a dope video. I love that your Rock n Roll & Hip hop, extra dope! That Missy Elliott line when Josh asked if you could U turn was perfect.
Y'all should make a trip to Chichot State Park in Bayou Chichot Louisiana. You can camp in a tent or a camper or rent a nice cabin. It's pretty nice. It has the largest man made lake in the country.
A trip to Biloxi Mississippi might be doable! I high recommend Tato-nut donuts in Downtown Ocean Springs and some of the small shops in that part of town and the there's the nightlife down the way by the casinos.
Nashville is beautiful this time of year and the Dive swim club and hotel is cool. That is kinda a lot of north for you probably. Maybe an early October ride one year for you
"On November 16, 2023," Chef Gigi clarifies. This date is finally becoming a reality for Zack and Cody, who have been waiting over 15 years to try the calamari fritti and proscuitto with melon. "But that's in 15 years!" Cody exclaims and Zack brings up a very good point, "What if I don't feel like Italian that day?"
When in doubt, have a certified welder perform any modifications to a bike's frame. I've seen butcher jobs which ended up making a bike dangerous on all counts. I've never cared for raking a frame. I'd go for a little stretch in the frame's down tubes. I've also seen some righteous choppers built around swingarm frames. Fork length would be somewhere between four of six over. A front brake is a must. Finish-wise, I've always been a sucker for candy school bus yellow or a candy tangerine/red mix with a deep clear overcoat. Chey, when it comes to your chopper project, take your time, look for deals on quality parts and plan accordingly. Ciao baby. -- W
Looking forward to chopper build content....Blue 80's?(rear turn signals on bags + early 80's tank logo) FLH Shadetree was riding? Haven't seen this motorcycle in previous vids? Did I miss one?
Hmmm... Some dope places ive been to in Florida that id say would be worth while. Blue springs state park is beautiful. Got a massive hot spring, can go like scuba diving through it too. Really beautiful place and fairly low cost. Dunno if they're still there, but last I went there were a lot of otters too. Dunno if they have different hours/activities now that its fall/winter. Lovers key state park is dope too, as well as all the islands surronding it like captiva.
Chey to let someone help you with what you don't know is a great idea. Think about it, Harley got a bad name years ago, during the chopper Era, lots of guys thought they could do it, and lots of guys sat on the side of the road.
Saying you want to build something but then saying you dont want to take the time to learn how to weld is kind of a contradiction. Just pick up a flux core machine from harbor freight and start there its basically point and shoot perfect for small hobby stuff. Not like you need to learn structural and tig or any crazy stuff just start small and go from there. Welding is a great skill to have.
@@DRocRSS2012 I get where you’re coming from she probably didn’t even black smith her own rotors. Slaughter her own cow for the seat. Basic bitch didn’t even grow her own rubber tree plant and process them into tires. She just went and had her friends build her a frame like that the poser indian Larry who used paughco
I don't doubt you can build it but riding that thing might be a pain that front end flops and the steering might be a nightmare but Please go ahead enjoy your self
You and Shade Tree are proper legends, If a Gixxer passed you guys with a muppet helmet I am sorry. I am who I am. Though I love you guys. I ride dumb fast.
Looks like you farmed out the welding to the right guy. As a welder myself, nothing causes me greater cringe than seeing a guy so proud of his 2 wheeled creation and finding it covered with duckshit welds.
Chey while others are going sat oh you had it built .1 most folks do because they like you don't have all this skills to do it.and unless you can build motors frames electrics paint etc you pay to get it done and if you do it yourself it's very time and money consuming .I just hope you really ride the f out of it when it's done
I dont want to build a chopper. I have 3 stock shovelheads, at this point in history stock bikes are becoming so rare that chopping one up is a crime against humanity. I know choppers are supposed to be unique, but they are a dime a dozen…
I pray that other folks open up forgotten angels all over the USA, foster care needs a revamp.
Yes, this.
More important than pretty welds a pro can build a frame that will ride straight and not snap in half and kill you.
Not dying is always a good thing. 😊
First big outing on the Goldwing could be a full beginning to end trip on I10.
can’t wait to see your chopper take shape !
Chey, this was a dope video. I love that your Rock n Roll & Hip hop, extra dope! That Missy Elliott line when Josh asked if you could U turn was perfect.
You can do it. Never give up!😊
Hearing Chey talk always reminds me of the song Valey girl from Frank Zappa. Love it! 😊
Great video thank you very well done.
always better to know your limits and outsource than to not get what you envisioned.
Howdy, agreed, I am the same way. Hope the new place is working out nice. Have a great Sunday.
Can't wait for the chopper and go to Key West the power of the Garfield commands you! The Goldwing sounds cool. Have fun and be safe
Here after the stream and next bike announcement. Seeing the flh makes me miss my own roadking.
You have heated grips and heated seat, you can go any where you want.
Y'all should make a trip to Chichot State Park in Bayou Chichot Louisiana. You can camp in a tent or a camper or rent a nice cabin. It's pretty nice. It has the largest man made lake in the country.
port aransas tx is a great unknown winter spot..
A trip to Biloxi Mississippi might be doable! I high recommend Tato-nut donuts in Downtown Ocean Springs and some of the small shops in that part of town and the there's the nightlife down the way by the casinos.
Wanna kinda warm ride? Go to the Lone Star Rally in Galveston, Tx.
I'm so jealous when your riding your wing. I've owned four different Goldwings, but never a that one. Take care Chey!
Ride the wing to Key West… it’s a beautiful ride and a great destination!
Arizona needs to be on your list. Come check out Sedona and Jerome. Be safe and have fun.
A motorcycle camping road trip to the keys or New Orleans on the Goldwing would be great content
They look good, awesome women, wait until June or July and you & josh come to western pa.Pittsburgh area .lots good riding roads !
Nashville is beautiful this time of year and the Dive swim club and hotel is cool. That is kinda a lot of north for you probably. Maybe an early October ride one year for you
Roadtrip to the Keys! Stop by on the way down!
Go camping in Highlands hammock or Kissimmee state parks. Check out the old castle drive routes.
THE GRINDER I AM, makes up for the welder I ain’t.
Smart girl😊❤
zack and cody can finally have that reservation on the best italian restaurant in the world haha nov 16 2023
"On November 16, 2023," Chef Gigi clarifies. This date is finally becoming a reality for Zack and Cody, who have been waiting over 15 years to try the calamari fritti and proscuitto with melon. "But that's in 15 years!" Cody exclaims and Zack brings up a very good point, "What if I don't feel like Italian that day?"
CANNOT WAIT to see this chopper!!!
Also now I'm going to hear Missy Elliot in my head every time I U-Turn.
When in doubt, have a certified welder perform any modifications to a bike's frame. I've seen butcher jobs which ended up making a bike dangerous on all counts. I've never cared for raking a frame. I'd go for a little stretch in the frame's down tubes. I've also seen some righteous choppers built around swingarm frames. Fork length would be somewhere between four of six over. A front brake is a must. Finish-wise, I've always been a sucker for candy school bus yellow or a candy tangerine/red mix with a deep clear overcoat. Chey, when it comes to your chopper project, take your time, look for deals on quality parts and plan accordingly. Ciao baby. -- W
Love that chop you went to see
Chey - jealous that you can still ride.. Would love to see you road trip to Key West.
You are the best Chey! Great video
Go to the keys.
Looking forward to chopper build content....Blue 80's?(rear turn signals on bags + early 80's tank logo) FLH Shadetree was riding? Haven't seen this motorcycle in previous vids? Did I miss one?
Hmmm... Some dope places ive been to in Florida that id say would be worth while. Blue springs state park is beautiful. Got a massive hot spring, can go like scuba diving through it too. Really beautiful place and fairly low cost. Dunno if they're still there, but last I went there were a lot of otters too. Dunno if they have different hours/activities now that its fall/winter. Lovers key state park is dope too, as well as all the islands surronding it like captiva.
Mel Fisher museum in Keys
hard tail ---sore rump and sore back -- good luck
a better answer is I want my welds to hold LOL
love the hair you go girl
@cheyleesi is there an episode on how to install those dope dual headlights on the sportster?
Chey to let someone help you with what you don't know is a great idea. Think about it, Harley got a bad name years ago, during the chopper Era, lots of guys thought they could do it, and lots of guys sat on the side of the road.
Saying you want to build something but then saying you dont want to take the time to learn how to weld is kind of a contradiction. Just pick up a flux core machine from harbor freight and start there its basically point and shoot perfect for small hobby stuff. Not like you need to learn structural and tig or any crazy stuff just start small and go from there. Welding is a great skill to have.
I did not learn if you had what it took to build a chopper.
If you build a chopper I'm building a chopper 😮
Of course she can do it
Appalachicola > Panama City > Destin > Pensacola > Gulf Shores > Mobile > Biloxi > New Orleans - Stay off the Interstate as much as possible.
Your getting good at editing and speaking confidently
Come Louisiana!
Get a few nylon skull caps and it will fix the helmet hair issue 🤘
Come to Arkansas and dig for Diamonds
Can’t wait to see that Chopp!!
Thanks, ...
COOP
...
🤘🤘🤘
In other words - outsourcing the work = You are not building. Someone else is. Which is expected. tbh
Outsourcing a bike build is cooler than being petty
@@davesleyer9393 Yeah, not so much when you claim to build it yourself. That is just pathetic. Thx for the effort Dave
@@DRocRSS2012 I get where you’re coming from she probably didn’t even black smith her own rotors. Slaughter her own cow for the seat. Basic bitch didn’t even grow her own rubber tree plant and process them into tires. She just went and had her friends build her a frame like that the poser indian Larry who used paughco
You should go do a riders course with Jerry Palladino.
🤘🏻🤘🏻🤘🏻🤙🏼🤙🏼🤙🏼
The blue Harley your uncle is riding is it for sale and how many miles
🤟👽🏍🎬 So many Oooohs and aaaaahs
Awesome video ❤
If I were you I wouldn't head North I'd be headed to Key West.
18 yamaha eluder "Big Booty Judy'" is her name.
When are you coming back to Portland
How about a trip to the Keys Chey?
I don't doubt you can build it but riding that thing might be a pain that front end flops and the steering might be a nightmare but
Please go ahead enjoy your self
Canada 🇨🇦 😊
So how would a camping trip to Key West
You could do an overnight down by key west
Molly Ringmold? :P
Central Texas. OK, something s up, a lot of Kyle lately.
One of the easiest nights to work at the club,we close very soon it is 3AM now this starts at 3:30 aaah don't think i can make it home in time tho
MADE IT YALL WOAH
how long has Garfield been on your Goldwing?
You and Shade Tree are proper legends, If a Gixxer passed you guys with a muppet helmet I am sorry. I am who I am. Though I love you guys. I ride dumb fast.
What is that welding costing?
Well it just isn't welding if he is building a frame he is a fabricator not just a welder.
take the Goldwing to Key West
Wait.... No funny addition to the last couple of seconds of vid? I love those.
Looks like you farmed out the welding to the right guy. As a welder myself, nothing causes me greater cringe than seeing a guy so proud of his 2 wheeled creation and finding it covered with duckshit welds.
Take a ride down to key west
Don't care I love your hair ❤ messy hair style is good on you 😊
You should go see killtony in Austin tx
Come to Columbus oh so we can ride the windy 9 be honored to be you all some drinks. I ride all year around snow and all
I don't understand the question, why 'couldn't she?
What was the color of that blue Harley your uncle was right
dESTIN fLORIDA
Chey while others are going sat oh you had it built .1 most folks do because they like you don't have all this skills to do it.and unless you can build motors frames electrics paint etc you pay to get it done and if you do it yourself it's very time and money consuming .I just hope you really ride the f out of it when it's done
breakfast club iz weere me name came frm.
🤘😘🤘
bck it up chey!!
😍
Hey now, don't pick on a lady for helmet hair. We all suffer from it. Well, at least those of us that wear gear.
That purple hair has to go!
Kol
I dont want to build a chopper. I have 3 stock shovelheads, at this point in history stock bikes are becoming so rare that chopping one up is a crime against humanity. I know choppers are supposed to be unique, but they are a dime a dozen…
Floridha is such a Boring ride
I think you r Cool