Look how difficult it is to find people like that, so simple and so cooperative in today's world, you are out of the ordinary, my friend, and your work and your cooperation are very commendable. You don't know how much you help people from all over the world with your contributions and also It is very clear that you are an unmatched genius, thank you very much for every .You do a sensational job on the technical side and also on the human side and as a persoI have managed to repair two 6900 graphics thanks to this and I can assure that the software works perfectly as it is in the video described, not a single problemn.👏👏🙏❤
OMG man 😮 I see you did giant work to make this system to work. Congrats and big respect :) I did try to do it something similar but Linux “say” no to me 😂 all the best with your work 🎉😊
First of all Tony I believe I speak for all of us, thanks for sharing. Second I believe we need some Linux wizards here to port these programs to a contemporary Linux distribution with proper support for modern hardware preferably live distributions where you can run them from a USB thumb drive. I would suggest that any individual with such skills and the will to do the work should contact you in your email. We got 110,000 people here somebody must be willing and able.
Perfect timing, my RX6800XT has some artifacts sometimes and I wanted to memtest my gpu and searched for your tools and found this video. Thank you. Edit: Couldn't get TServer to boot on my X570 board.
tony i never can thanking you enough for what you doing and sharing this knowledge, i searched a lot about this and couldnt find any proper toturial even msged you on discord i am gonna download and try this thank you so much i learned so much by your videos so far if you had a class teaching about fixing gpus i would participated thanks again i ow you one
For all that have issue with booting of harddrive all hard drives can work its simply error with backup image,to make it work flash the image nw suplied,than download ubuntu 16.04.7 and install it on same drive with keeping old ubuntu,and whoila you can boot from hdd,tested on 1tb ssd and 80,160,250,500gb hdds all works fine.
Thank you for the files. some points. there is no need for any specific drive old or new. the thing is this image use MBR boot method so be sure to check this in your bios when booting this image as most new biose uses UEFI boot, enable CSM and disable secure boot also. also set drive mode in bios to AHCI(it will cause your current os not to boot, revert back after) . thats all there is to booting this ubuntu 16 image. Also i had issue with copying directory to image file using that shitware DiskGenius, if you also had issue copying, after writing the image attach the whole drive using vmware workstation as physical disk to virtual machine it will then boot into the image you can enable networking, update apt and install openssh-server and then simply SCP the files (It will be as ordinary linux machine).
thank you for sharing this modified version. this is much handier than the original ones. i can do testing with one command now. greetings to the best !
Great video. I can only imagine what it took to get this all sorted out into a comprehendible video. I may just avoid Amd repairs for a minute. Oh damn I already bought one to do for practice. AMD RX 570 4GB. Well I guess I learn some Ubuntu as well.
Hi, just for reference. I was dealing with restoring images on different drives and many times the drive couldn't become bootable just because it was connected extrernally with a usb adapter. If you have the same issue, connect the drive directly to the motherboard with a sata cable, should be some sort of protection for the boot sector.
I can't seem to get the Tserver to boot up, tried with a mechanical drive and a SSD, the only thing I get on screen is a underscore blinking. Can someone help ?
nice video, you could make base linux image with menu only and each gpu as a separate zip folder you just dump into linux image. don't need , don't have to download. certanly would make for smaller download files. the only requirement would be linux running from fat partition so windows could open it with no fuss i have a question about scripts for older and egzoric gpus though. Do you have any idea where to find scripts for testing workstation gpus like firepro w series? in essence they would be gcn1 or gcn2 with doubled memory eg w4300 or w5100 are like hd7790 with 4gb of ddr5 either in 8 or 4 chips but still on the same core and memory bus so i don't know if regular hd7790/r7 260x/360 script would work with them due to different memory organization and density
amazing and you can share them on zip or rar file so we can extract and add to the same folder as you did, looks very good cant wait to test it.. have alot of gpus at home
Hello🤝I have a question because I do not have a license for diskginus and in my country it is quite expensive and I do not use this program on a daily basis. Is there another program or the possibility of adding a folder to the menu with the selected folder of the card we want to test?
Thanks for this, ive been messing around teying to run a tserver test on 5500xt and it constantly hangs. Simple ./memtest trainincheck was all i needed 🤦♂️ Thank you!
Tried it with a Samsung HDD and my PC goes on boot loop. Is there any explanation why it only works selectively? I don't know if I did something wrong or if it is just because of the type or brand of HDD I'm using.
you can do a distro upgrade to upgrade the ubuntu to latest ... and then you can create an image ... you do not have to be stuck with the old ubuntu version !!!
I have not manadged to make a usb. Just a black screen with blinking line. Can someone help me. I am willing to pay for help. Took the whole day and was not able to get it working
Hello, I have a question: Tserver os only.pmfx file, once I restore it to the disk, then where should I put the folder with the sample RX580 card and how to do it? Thank you in advance for your answer.
nice tutorial. i have RX580 from XFX and RX580X from sapphire works it with that cards ? i also will test a R9 280x from sapphire and a HD6970/6990 all have a Ram problem or gpu problem. ( screen collors and some times not booting and hold up the pc from booting or powering up to start)
How can i run it if my screen is black and cant see anything? Can i use integrated gpu to output the picture and still run tserver on my gpu in my pcie slot?
Man, it's the best tool repository i've seen! Still I can't test my Sapphire RX580. Folder '580' does not contain 'memtune' file, same for 'rx580a6' folder. What can I do with this? Can I simply take it from some oher folder and place it to, say, 'rx580a6'? Will this work?
I have it working - I used his image and the tutorial he gave here...are you using a old hard drive? Are you using a usb connector or directky attached to your motherboard?
I am trying to get this working on my system. I am restoring the image to a third HDD. I've been trying drives from 2006-2008 era. I Tried WD2500AAJS 250g and Seagate barracuda 160g and 250g versions.
update: It seems that it worked on the mentioned 250g Barracuda and the other ones, I just thought something was corrupt since the screen had massive artefacting on boot. I navigated through the ubuntu startup menu by heart going to the recovery option in advanced. I got into Linux after that got the memtune started for my faulty XFX 6800xt SWFT. seems channels E0 and E1 are faulty, which is weird since the card only has 8 memory chips...agt reported success on A0 through H1. Huge thanks for the tutorial. dmgg.py reported most of the chips failed. Could this mean memory controller is at fault? Who knows... I'll figure something out.
perdona caballero eso es insultar como que no comparte del todo? no se que hiciste yo hice lo que dijo el y yo tengo mi memtune en las 7000 por tanto esta claro que o lo hiciste mal o lo hiciste mal tambien porque esta ahi claro como el agua cristalina y lo dio todo si lo dio todo lo que muy poquita gente da a ver cuantos encuentras tu compartiendo estas cosas , ok y ademas gratis que mas quieres ?
I think you hv mistaken mechanical hdd with optical
yeah sorry about that.
I looked at it and it reminded me of a cdrom for what ever reason
I mean, they both spin, so.... ?
Do you think he's so young that he never had mechanical hard drives?
who cares
@@charlesnefdt7783 Not you, and... well... only you. It may seem like semantics to you, but that just makes you a dullard.
this is why u r the best channel on youtube. nobody wants to share tools. hope u add this measurments picture to your shared drive
Discord has it
100% agree @northwestrepair is for the community and not just him self 🎉
🙏
Can we get these tools elsewhere too?
Keep up the good work I have no idea how anything works i just watch ur vids to sleep
Look how difficult it is to find people like that, so simple and so cooperative in today's world, you are out of the ordinary, my friend, and your work and your cooperation are very commendable. You don't know how much you help people from all over the world with your contributions and also It is very clear that you are an unmatched genius, thank you very much for every .You do a sensational job on the technical side and also on the human side and as a persoI have managed to repair two 6900 graphics thanks to this and I can assure that the software works perfectly as it is in the video described, not a single problemn.👏👏🙏❤
OMG man 😮 I see you did giant work to make this system to work. Congrats and big respect :) I did try to do it something similar but Linux “say” no to me 😂 all the best with your work 🎉😊
This is a great channel and a humble person who also collaborates with others. to admire I wish there were more people like that
First of all Tony I believe I speak for all of us, thanks for sharing. Second I believe we need some Linux wizards here to port these programs to a contemporary Linux distribution with proper support for modern hardware preferably live distributions where you can run them from a USB thumb drive. I would suggest that any individual with such skills and the will to do the work should contact you in your email.
We got 110,000 people here somebody must be willing and able.
Wow to share all that knowledge to us as simple as that just wow huge respect for you and good luck
Perfect timing, my RX6800XT has some artifacts sometimes and I wanted to memtest my gpu and searched for your tools and found this video. Thank you.
Edit: Couldn't get TServer to boot on my X570 board.
What commands did you use to test the rx6800?
it worked out ?
You just gained a new subscriber !
Thanks a lot for sharing the files and guiding us on how to use them. Love from India !
tony i never can thanking you enough for what you doing and sharing this knowledge, i searched a lot about this and couldnt find any proper toturial even msged you on discord i am gonna download and try this thank you so much i learned so much by your videos so far if you had a class teaching about fixing gpus i would participated thanks again i ow you one
how did it go?
For all that have issue with booting of harddrive all hard drives can work its simply error with backup image,to make it work flash the image nw suplied,than download ubuntu 16.04.7 and install it on same drive with keeping old ubuntu,and whoila you can boot from hdd,tested on 1tb ssd and 80,160,250,500gb hdds all works fine.
That's the type of detailed videos i like !
Thank you for the files.
some points. there is no need for any specific drive old or new. the thing is this image use MBR boot method so be sure to check this in your bios when booting this image as most new biose uses UEFI boot, enable CSM and disable secure boot also. also set drive mode in bios to AHCI(it will cause your current os not to boot, revert back after) . thats all there is to booting this ubuntu 16 image.
Also i had issue with copying directory to image file using that shitware DiskGenius, if you also had issue copying, after writing the image attach the whole drive using vmware workstation as physical disk to virtual machine it will then boot into the image you can enable networking, update apt and install openssh-server and then simply SCP the files (It will be as ordinary linux machine).
Hello! Tony, Thank you so much for your uploaded files. Have a wonderfull day.
You are very welcome
thank you for sharing this modified version. this is much handier than the original ones. i can do testing with one command now. greetings to the best !
A man who did not give up on humanity!
Finaly, thx Tony you are a life saver 👍
U are a king amongst men . my 5500xt was dying from a few days ( now dead on drivers ) and i had no way of testing its memory and now i do
let me guess... it freezes while loading windows with driver installed, right?
result?
Big THX!
You are the first one i know how share's his Tools! 😍🥰😘
@Everyone: Don't forget to like & Subscribe!!!!!
I was waiting for this thanks Mate
Great video Tony.. Very helpful.. 👍👍
Great video. I can only imagine what it took to get this all sorted out into a comprehendible video. I may just avoid Amd repairs for a minute. Oh damn I already bought one to do for practice. AMD RX 570 4GB. Well I guess I learn some Ubuntu as well.
Great thx m8 you are the best. And thx for sharing .
Wow thank you for sharing you’re tools with us
Does it also work for my dying X800XL and not displaying HD5970
Thank you so much for sharing the information and files
Absolute legend!
Thanks for this video.
free version of dg don't allow to write files on partition :(
Exactly, did you manage to solve it?
Hi, just for reference. I was dealing with restoring images on different drives and many times the drive couldn't become bootable just because it was connected extrernally with a usb adapter. If you have the same issue, connect the drive directly to the motherboard with a sata cable, should be some sort of protection for the boot sector.
Way you dont Run The ISO on a virtual machine ?
I can't seem to get the Tserver to boot up, tried with a mechanical drive and a SSD, the only thing I get on screen is a underscore blinking. Can someone help ?
nice video, you could make base linux image with menu only and each gpu as a separate zip folder you just dump into linux image. don't need , don't have to download. certanly would make for smaller download files. the only requirement would be linux running from fat partition so windows could open it with no fuss
i have a question about scripts for older and egzoric gpus though. Do you have any idea where to find scripts for testing workstation gpus like firepro w series? in essence they would be gcn1 or gcn2 with doubled memory eg w4300 or w5100 are like hd7790 with 4gb of ddr5 either in 8 or 4 chips but still on the same core and memory bus so i don't know if regular hd7790/r7 260x/360 script would work with them due to different memory organization and density
Very helpful 🙏
amazing and you can share them on zip or rar file so we can extract and add to the same folder as you did, looks very good cant wait to test it.. have alot of gpus at home
what is the group on discord?
Hello🤝I have a question because I do not have a license for diskginus and in my country it is quite expensive and I do not use this program on a daily basis. Is there another program or the possibility of adding a folder to the menu with the selected folder of the card we want to test?
Thank you for the guide. Hopefully you'll be able to share RX 5600 XT files later
its already there in mediafire link.
Also, i i said, you can get them from other versions. Find links on discord.
I wonder if it would network boot
Working for test RX 6750 XT ???
Awesome video
have u ever use a bios to remove a only a bad memory channel to fix gpu ? / theres a lot of this kind of bios btw
I take the same steps when restore the file to driver use the "TSERVER OS only.pmfx" ,but why i cant boot from the disk?
do we need an integrated GPU on CPU to do this?
Köszönöm! Várom az NV-t is!
Mam tune is not present on rx580😢
USB 3.0 to an SSD thingy hooks it up to a 2.5" Hard Drive via SATA. How tired were you?
Thanks for your input, it has been very useful.
I am currently testing an RX 6500XT, would you recommend testing it with an RX6700 TSERVE file?
Hello🤝good job I have questions this work with RX580?
This is actually very helpful. Thx.
Good work 💯
Hi, Thanks for your informative video I intend to test the drive on some SSds, is your Crucial drive M4?
MX500-found.
that is what we were talking aout haha thank you a loooot dude
How i do memtest on rx 580 with tserver, memtune or something else command. thx
menu file shortcut didnt work for me.. need to Q and type the command manually like video
Optical drive?
my bad
👍
Thank you
When i boot it, it artifacts and boots to busybox built-in shell
Thanks for sharing this
Thanks for this, ive been messing around teying to run a tserver test on 5500xt and it constantly hangs. Simple ./memtest trainincheck was all i needed 🤦♂️
Thank you!
thanks from brazil bro
thank you sir
Tried it with a Samsung HDD and my PC goes on boot loop. Is there any explanation why it only works selectively? I don't know if I did something wrong or if it is just because of the type or brand of HDD I'm using.
How do i run this on a secondary GPU?
you can do a distro upgrade to upgrade the ubuntu to latest ... and then you can create an image ... you do not have to be stuck with the old ubuntu version !!!
i think software may not run on later distro.
@@northwestrepair you do not know till you try !!! as far i seen it are mostly bash files so it should run on everything
Can you help tony? I'd love to get this working too.
a greeting from Spain
I have not manadged to make a usb. Just a black screen with blinking line.
Can someone help me. I am willing to pay for help.
Took the whole day and was not able to get it working
For RX570 folder it does not have memtine file please tell me the solution for that ? Or can u re upload
Hello, I have a question: Tserver os only.pmfx file, once I restore it to the disk, then where should I put the folder with the sample RX580 card and how to do it? Thank you in advance for your answer.
So how could i run memtune to test a laptop gpu where the mobo doesn't have a spot for the old hdd, only nvme m.2 or usb?
tserver is working on this OS ? or say no support in this SKU ?
very good work
Awesome video, can you do one for nvidia gpus next?
nice tutorial.
i have RX580 from XFX and RX580X from sapphire works it with that cards ?
i also will test a R9 280x from sapphire and a HD6970/6990 all have a Ram problem or gpu problem. ( screen collors and some times not booting and hold up the pc from booting or powering up to start)
How can i run it if my screen is black and cant see anything? Can i use integrated gpu to output the picture and still run tserver on my gpu in my pcie slot?
Bro!? Why you keep calling a mechanical hard drive, to optical drive? Nothing is optical in it...
Man, it's the best tool repository i've seen!
Still I can't test my Sapphire RX580. Folder '580' does not contain 'memtune' file, same for 'rx580a6' folder. What can I do with this? Can I simply take it from some oher folder and place it to, say, 'rx580a6'? Will this work?
I can't seem to get that image booting. All I get is a flashing cursor after bios splash screen. Anyone else had this issue?
I have it working - I used his image and the tutorial he gave here...are you using a old hard drive? Are you using a usb connector or directky attached to your motherboard?
@@eliminator8626 yes, a 1tb HDD and connected via SATA cable to mainboard. I can't seem to get it running at all 😔
@@trikkytrikky397 m2, flashing coursor after bios and nothing happening, im using 250gb hdd
Can’t get it to boot on multiple HDDs. Very saf
@@HiimAbyss very strange. I have it working on a few drives. Also figured out a way to transfer the files for free
So does it work with rx 6900 xt ?
Anyone else love handling SSD drives? Reminds me of precious metal bars lol
Tested three different hard drives. I was not be able to boot from any of them. Tested two Samsung SSDs 830, 850 and a old USB HDD. Any tips?
Same situation. I used 5 different hdd and won't boot.
Black screen and blinking underscore before grub?
@@saod8634 No boot device is found
@@sebastianprues7024 try to restore grub, you will need a flash drive with linux and that's it, it helped me
@@saod8634 Yes, but I found solution - repair grub
good tutorial, 😉
HELLO. I WANT TO REPAIR A R9 295X2 BUT I CAN'T DO IT WITH THE TSERVER PROGRAM. SOLUTION?
Do it with your hands instead.
pleaassssse do the invidia as well
Does this work on rx 580 8 gb? Anyone please? Tony?
sir make video on nvidia bootable drive
I really love you
thanks.
👏👏👌👌👍👍
I just gave all comments (and replies) a like. I couldn't think of anything intelligent to say.
I am trying to get this working on my system. I am restoring the image to a third HDD. I've been trying drives from 2006-2008 era. I Tried WD2500AAJS 250g and Seagate barracuda 160g and 250g versions.
update: It seems that it worked on the mentioned 250g Barracuda and the other ones, I just thought something was corrupt since the screen had massive artefacting on boot. I navigated through the ubuntu startup menu by heart going to the recovery option in advanced. I got into Linux after that got the memtune started for my faulty XFX 6800xt SWFT. seems channels E0 and E1 are faulty, which is weird since the card only has 8 memory chips...agt reported success on A0 through H1. Huge thanks for the tutorial. dmgg.py reported most of the chips failed. Could this mean memory controller is at fault? Who knows... I'll figure something out.
Going by the image on 24:53 seems I have a failed chip near the place where pcb-s tend to crack most often. I wonder if I could only resolder it....
@@lukadragicevic8585 multiple chips failed=lift the core and inspect.
please do nvidia lol.
i asked about this for nvidia last vid.
and you tease with this amd stuff :(
You type too much .... cd R [hit tab key for bash completion], enter ...4 keystrokes saved.. =)
i dont think it will work in a GUIless environment.
@@northwestrepair Should do... suck it and see =)
😮
Yes……..not an optical drive………..that would be a CD drive. It is a 2.5” platter drive or simply a laptop hard drive.
that's a hard drive not an optical drive btw
Where my 7000 memtune at... bucko? Shows his candy box of tools which he doesn't fully share... @nortwestrepair
esta ahi amigo si haces tal cual el te explica esta el mentune algo no has hecho bien seguro
yo ya lo instale y puedo asegurarte que va perfecto y precisamente probando una rs 6900 de gigabite mira el video bien mirado esta claro como el agua
perdona caballero eso es insultar como que no comparte del todo? no se que hiciste yo hice lo que dijo el y yo tengo mi memtune en las 7000 por tanto esta claro que o lo hiciste mal o lo hiciste mal tambien porque esta ahi claro como el agua cristalina y lo dio todo si lo dio todo lo que muy poquita gente da a ver cuantos encuentras tu compartiendo estas cosas , ok y ademas gratis que mas quieres ?
Mechanical drive, not otical.
yeah i know
👍
Anyone wanna set up a torrent so we cant get the entire setup? My upload is garbage but I would definately seed it.
Torrent is a problem. Most don't seed
You should've told us that we need to pay 99$ for pro license to copy that folder into the EXT4 :'(
Oh sorry about that.
Want to make money ? Get ready to spend some i guess.