But this rain company are robbing clients with falls advertising. I got mine it does not work as they promised first they don't tell you how the 2 sim cards works, once you receive the router you will struggle for services even them calling you back they are only interested on signing you up after they don't care. The upload speed they claim it goes 30mbps it is actual 1-2 mbps not 30 mbps as they, the only thing that works is upload speed. Even when you change that position it won't make any different. A 30 minutes video will take 7-10 hours to upload because of that upload speed.
@@bassoniatv I was warned about it I ignored the people thinking it will work especially for uploading my RUclips videos just a waste of time and money I will advise no one to use if you don't want headache
Rain is working perfectly for me. It could be that u r struggling with network because of ur location. The 2 sim cards are free. You can use them on any mobile devices for calling because they both have 60 minutes of free calls, 100 messages and 2g data
Thank you. Can you connect a Ubiquiti Nano Station NSM5 to the RJ45 port to extend the wifi signal?, The nanoStation has POE and will be mounted on a tall pole.
To extend your Wi-Fi signal using a Ubiquiti NanoStation NSM5, follow these steps to connect it to the RJ45 port and mount it on a tall pole: Requirements Ubiquiti NanoStation NSM5 POE (Power over Ethernet) adapter Ethernet cable Pole mounting kit (usually included with the NanoStation) Tools for mounting (e.g., wrench, screwdriver) Steps to Connect and Configure the NanoStation NSM5 1. Hardware Setup Mount the NanoStation: Attach the NanoStation to the pole using the mounting brackets and screws provided. Ensure it is securely fastened and positioned correctly to cover the desired area. Connect the POE Adapter: Plug the power cable into the POE adapter. Connect one end of an Ethernet cable to the LAN port on the POE adapter and the other end to your network device (e.g., router or switch). Connect another Ethernet cable from the POE port on the POE adapter to the NanoStation's RJ45 port. 2. Configuration Access the NanoStation: Power on the NanoStation via the POE adapter. Connect your computer to the same network as the NanoStation. Open a web browser and enter the default IP address of the NanoStation (typically 192.168.1.20). Login: The default username is ubnt and the password is ubnt. Change the default password for security reasons. Network Settings: Go to the Network tab. Set the network mode to Bridge or Router based on your network configuration. Bridge mode is typical for extending a network. Configure the IP settings (static IP or DHCP) according to your network requirements. Wireless Settings: Go to the Wireless tab. Set the Wireless Mode to Access Point to extend the Wi-Fi signal. Select the appropriate SSID and configure the security settings (WPA2 is recommended). Set the Frequency to avoid interference with other networks. Save and Apply Settings: Click Save Changes and then Apply to reboot the NanoStation with the new settings. Align the NanoStation: Use the signal strength indicators in the NanoStation’s web interface to align the device for optimal signal coverage. Final Steps Test the Connection: After the NanoStation reboots, test the Wi-Fi signal to ensure it is extending as expected. Make adjustments to the alignment if necessary. Secure the Installation: Ensure all cables are weatherproofed and the NanoStation is securely mounted. Troubleshooting Tips No Connection: Check all cable connections. Ensure the POE adapter is providing power. Weak Signal: Re-align the NanoStation. Check for interference from other devices or structures.
But this rain company are robbing clients with falls advertising. I got mine it does not work as they promised first they don't tell you how the 2 sim cards works, once you receive the router you will struggle for services even them calling you back they are only interested on signing you up after they don't care. The upload speed they claim it goes 30mbps it is actual 1-2 mbps not 30 mbps as they, the only thing that works is upload speed. Even when you change that position it won't make any different. A 30 minutes video will take 7-10 hours to upload because of that upload speed.
am sorry about that my man
@@bassoniatv I was warned about it I ignored the people thinking it will work especially for uploading my RUclips videos just a waste of time and money I will advise no one to use if you don't want headache
@@hlulanithetsongaprince its worse if you are a person who relay on internet for your work
Rain is working perfectly for me. It could be that u r struggling with network because of ur location. The 2 sim cards are free. You can use them on any mobile devices for calling because they both have 60 minutes of free calls, 100 messages and 2g data
@@MahlapeShabangu-jm7em you right
hi i have just received mine but everytime i connect my laptop the router says no internet and stops working on every device
Hey, do you know if Rain allows for port forwarding? Thank you in advance.
Thank you. Can you connect a Ubiquiti Nano Station NSM5 to the RJ45 port to extend the wifi signal?, The nanoStation has POE and will be mounted on a tall pole.
To extend your Wi-Fi signal using a Ubiquiti NanoStation NSM5, follow these steps to connect it to the RJ45 port and mount it on a tall pole:
Requirements
Ubiquiti NanoStation NSM5
POE (Power over Ethernet) adapter
Ethernet cable
Pole mounting kit (usually included with the NanoStation)
Tools for mounting (e.g., wrench, screwdriver)
Steps to Connect and Configure the NanoStation NSM5
1. Hardware Setup
Mount the NanoStation:
Attach the NanoStation to the pole using the mounting brackets and screws provided. Ensure it is securely fastened and positioned correctly to cover the desired area.
Connect the POE Adapter:
Plug the power cable into the POE adapter.
Connect one end of an Ethernet cable to the LAN port on the POE adapter and the other end to your network device (e.g., router or switch).
Connect another Ethernet cable from the POE port on the POE adapter to the NanoStation's RJ45 port.
2. Configuration
Access the NanoStation:
Power on the NanoStation via the POE adapter.
Connect your computer to the same network as the NanoStation.
Open a web browser and enter the default IP address of the NanoStation (typically 192.168.1.20).
Login:
The default username is ubnt and the password is ubnt.
Change the default password for security reasons.
Network Settings:
Go to the Network tab.
Set the network mode to Bridge or Router based on your network configuration. Bridge mode is typical for extending a network.
Configure the IP settings (static IP or DHCP) according to your network requirements.
Wireless Settings:
Go to the Wireless tab.
Set the Wireless Mode to Access Point to extend the Wi-Fi signal.
Select the appropriate SSID and configure the security settings (WPA2 is recommended).
Set the Frequency to avoid interference with other networks.
Save and Apply Settings:
Click Save Changes and then Apply to reboot the NanoStation with the new settings.
Align the NanoStation:
Use the signal strength indicators in the NanoStation’s web interface to align the device for optimal signal coverage.
Final Steps
Test the Connection:
After the NanoStation reboots, test the Wi-Fi signal to ensure it is extending as expected.
Make adjustments to the alignment if necessary.
Secure the Installation:
Ensure all cables are weatherproofed and the NanoStation is securely mounted.
Troubleshooting Tips
No Connection:
Check all cable connections.
Ensure the POE adapter is providing power.
Weak Signal:
Re-align the NanoStation.
Check for interference from other devices or structures.
@@bassoniatv AWESOME, thank you!
Brother does this router have WPS button for devices that run wireless I been sending rain messages enquiring but they haven't responded
Am not sure but chances are it has some videos I do them by my clients so I have to go back to check
Hi can u make a video how to connect the router on smart Tv or smartphone please
Thanks for the comment i will do my best if i get a chance
Hi can u please make a video of connecting this rain on a smart tv
Thanks for the request
How to I change the password? 😢 I gave my password to one person in my building but now it seems like everyone has it.
I think I did a video on that let me check
How is SA SAMS treating you? I hate this half baked software 😅
u might be right