Excellent job on the knurler! A couple of things: - For the "perfect knurl" look, diameter of the stock is important to have a perfect pattern. - As others have mentioned, the way you were using the knurler, still causes the work to deflect. Centering the knurl rolls with the work and clamping in, to the desired depth of pattern will produce better results. Overall great job and Merry Christmas!
Yeah I never understood that about knurling. The diameter would have to be some even multiple of the spacing of the knurl pattern for the patter to match up on each revolution, right?
It's definitely a meme now that he is riffing on. Ie he cuts with a hacksaw just to 'rile people up' (in a fun, non-harmful, non-offensive way). Also, he did a vid last week doing a 'shop tour' and his workshop area is a shared space with his granddad (he must be so proud of his grandson btw) and is absolutely TINY. I kid you not, there simply is NOT enough space to store one at all (not even handheld style). It would get metal dust everywhere, and in such a small area, everywhere includes the leadscrews and ways of his mill and lathe....
Suggestion - a big handle on top to turn the lead screw. You'll get immediate feedback through the hand and be able to increment the pressure gradually.
So, the disadvantage of this type of knurling tool compared to a scissor type is you're limited in the maximum diameter by the stick out of your wheels from the main body. With a scissor type with properly bent arms, you can do much larger diameter knurls with standard sized wheels. The trick to getting a good knurl is to put a lot of pressure on the wheels. That prevents double tracking. You also want to get the wheels to contact close to 180° from each other to prevent them from trying to spit out the part and putting all that side load on your spindle bearings. Don't worry about doing diameter calculations based on the pitch of your knurl, the diameter is going to change as the wheels bite in anyway. It might matter for a really course pitch knurl like a rope knurl or dial engraving knruls, but not the standard stuff you have. Double tracking is just a sign of insufficient tool pressure.
Mr. Pete discussed knurling details and talked about making tens of thousands and never dialing in the OD. I did some calculations. On a nominal 1" OD part the difference in diameter between even tooth counts is 0.023" (0.58mm) for course, 0.015" (0.38mm) for medium, and 0.010" (0.25mm) for fine. And that is if the wheels just touch the OD. But you will bury the wheels somewhere between 0 and 50% of the tooth profile, i.e., change the effective OD by 0% to 50% of the above numbers. That's only 0.005" for fine. These numbers are within the realm of machinists but knurlers don't have any means of precise adjustment. This is all for to say that few could achieve a successful knurl if the OD required such close tolerance.
I just watch Inheritance Machining make an acme tap and it was hard to turn until he ground some relief on the leading teeth of the tap and hs simply did that with a Dremel type tool. (in case you. are interested) All your parts came out beautifully and the final tool is a work of art. Enjoyed, Merry Christmas!
One trick on knurling that has worked for me is to center the top and bottom rollers and just make contact then back off the cross slide and tighten you adjustment just a hair then turn the piece by hand as you slowly move the cross slide back to where the wheels are centered on the piece top and bottom (kind of like a scratch pass when threading) and check the pattern after you have turned the piece by hand, if you are getting a double pattern or misalignment then turn .001 (one thousands) off the part and try again. This will allow you to get a proper pattern started then slowly turn in the adjustment knob until you get to the depth you want when knurling, you may have to do it a couple of times but the pattern will come in proper.
I have always been impressed that you make so much of your own tooling even down to taps. I can buy a decent quality M8 HSS LH tap for less than £10 here in ths UK. If was using them all the time, I'd probably go for a set of Presto's that I could get at Cutwel, just down the road for around £50.00. I just couldn't be bothered with the hassle of making one.
For a left-hand thread set? That's a nice price. But still, for one-time-use all those things get pretty costly. Though nice to make your own tools for your projects instead of buying.
Out in the Colonies however Hardware tools shops are not so common around the place. I live in a capital city and if I needed one on a weekday I would have the choice of maybe 3 stores that might have one within 20klms.
@@dazaspc I'm lucky about where I live I suppose, it used to be one of the biggest machine tool manufacturing areas in the UK around here. Colchester Lathes are only 3 miles away and Cutwel are one of the largest cutting machine tool suppliers in the UK. Lots of smaller suppliers still exist, although not as many as when we moved here 30 years ago. Where we would like to retire to wouldn't have anything within 75 miles that I could pop out and pick up.
I'm pretty sure it is even less around here. Most hardware-stores have closed during the last around 10-15 years and only some basic ones exist and they don't have those special tools like left-threathing taps indeed. And I live in a 'Metric country'. @@dazaspc Most things need to be mail-ordered nowadays ;-(*
Imagination is more important than knowledge. For while knowledge defines all we currently know and understand, imagination points to all we might yet discover and create.
That tool height is going to have to be set spot on centre, or you’ve just shifted the spindle load 90degrees. The advantage of the scissor type knurlers is that they apply even pressure, even if the tool height isn’t dead centre. Also, the diameter you’re cutting is the reason for the shallow double knurl. Either way, it’s a great looking tool and a challenging project. Well done
It doesn’t. There is play in the retaining pin so the whole assembly can shift up or down a few mm to account for not being perfectly on centre height. Cheers
Excellent build. Typically with this style of knurling tool you touch off on the work near the end of the workpiece then back off the carriage. You then adjust the 2 wheels to desired knurl depth, start the lathe and move carriage back to centre line. then move axially. Use air and fluid to get rid of chips. Alternatively, turn a small bit of the end to desired knurl depth, set wheel depth to that and then move to end of actual work piece. Dorian, Zeus and other brands have good descriptions in their catalogs.
Imo having reverse threads on one side, and a stop to keep it centered is unnecessary constraint, you could as easily have tapped the bottom jaw and done a clearance hole on the top jaw, and without the stop in the middle, it would center itself vertically, and be way less annoying to make.
I guess so. But there is play in the retaining pin. That recess I cut into the centre is larger than the pin so it allows for the whole assembly to shift up or down to align itself
I'm so relieved! Even 1 or 2 great RUclipsrs that I respect and admire (along with more than a few "orhers") jumped on the kit band wagon and it was so annoying. Especially one (from my own country I'm ashamed to say), that's made a whole bunch of the kits. All for promotion/free etc and it's frustrating! Well done for originality!
Nice work! Maybe add a small knob ( knurled of course) to the top of the adjustment screw to tighten it? Not too large to allow clearance to the chuck.
I know you can get the pattern wheels cheap, but I would still love to watch a quick video of you making some.. some standard ones for diamond knurl, some straight ones, and maybe some for the rounded ring knurl Love the videos, I learn a ton! (just got a mini lathe myself after wanting one for like 16years :D)
I like this tool design. I was wondering how you were going to get even pressure on both wheels compared to the scissor type. I think letting them float on the adjustment rod should do it if you have the height set right. The final example knurl could still do with some work though as it was double 'cut' on one wheel and single on the other. It should be looking like even diamonds if the wheel pressures, and feeds and speeds are correct.
I was always taught ro knuwl at a spindle speed ad slow as the lathe will turn, with a feed rate as fast as the machine can do. Plenty of neat cutting fluid. Heavy cutting, or tapping oil. But ifcause a clamp style tool like the one you made as to a push style is superior
I just watched your video and it is interesting to see what you have created. I do knurling every week for work that we have multiple types and sizes of wheels we use. There is a easy way to figure out a calculation for the wheels you are using. No matter what they will align after a couple rotations of the bar. A easy way to figure out the size you need to make your parts OD is to make a line on the wheel and with paper, dip the wheel in ink or paint and with a marked point set it down and push the wheel multiple times over until it makes a full rotation. Count how many lines it makes in the distance. Divide the distance in inches by how many lines it makes. You can then use that number for the equation as following, we will use Number figured out as X and OD size, 2" Bar divided by X. The Number resulting will always be a ##.####. Take the Whole number removing the decimal spots and then times it by X. The resulting number should be less then the original OD size and when you knurl the OD at that size you will find it will easily knurl cleanly no matter the pressure. You will have to redo this method for every different size wheel and knurl shape but it will make you life very easy after figuring out what OD it needs to be. Remember when you knurl it will most likely push up back to the same OD size or similar size as before. I know a lot of people have different approaches but I find this helpful and a Master Machinist taught me this method. I am very happy to know it now because knurling was extremely hard before. If you want to see examples or a picture feel free to message me and I can discord message or email it to you. Keep up the good work!
nice :) a few advices: try to fix the slitting saw runout, will help with saw life. Try using loctite 638 instead of 243 for a better bond. As far as knurling goes, i was using coolant when knurling, try to be at the perfect center and i was running it slower with power feed. You can get pretty good diamond pattern even on steel. If it is making a double criscross pattern, make a diameter of the piece a little smaller and try again :)
Aluminium is close to working with hardwoods so can use a lot of woodworking bits when necessary. Nice work on another creation. Looks a bit like a Zaytran gripper.
Nice build! Noticed the amount of sparking and spattering when you were welding, looks like you had some contamination (or lack of shielding) going on which may have contributed to your weld issues. Keep the builds coming!
to get a good knurl finish you need a very rigid setup where you can apply a lot more force with fewer passes. the more passes you do actually starts to ruin that result rather than make it better.
You might want to check the preload on the spindle bearings. The milling you were doing on cleaning up the material for the knurl arms at around the 6:29 mark forward show a lot of vibration in the Z axis (you can actually see the spindle moving up and down in the spindle cartridge) and it's even reflected in the finish.
There is another type of Knurling tool that works very well for parallel knurls and it uses 3 wheels. The one I made didn't use a LH/RH thread and only a screw on each but still gets it done. I used the head of a self centering knurling tool as the bottom support tool and a single as the top. I had to make about 200 pins that were 5mm in diameter with a heavy parallel knurl on them. I measured them making contact with a 5mm pin in the chuck then made note, installed some 5mm stock for the pins that was about 2 meters long and set the knurl slowly to full depth at the chuck end then set the lead screw to move at about a 4mm pitch and let it rip (Well maybe not rip at 40 rpm) and did the knurls in one go on each bit of stock. It worked surprisingly well except for the knurls had a slight rotational lead on them. If I could have run the lathe slower it would have been OK, but for the length of pins I was making it was fine. Because the material was trapped inside the tool no deflection worries and a consistent depth for the entire length.
watching your drilling/slitting saw operation, you need a small bandsaw. Look at Harbor Freight for their Herculese saw and the bandsaw saw base. Makes for a small hand saw, table bandsaw, and miter saw, all in one. Small footprint.
Dorian makes knurling tools of this general configuration. (Download their knurling tool catalog. It's quite a treatise on knurling.) Much more complicated than a scissor or parallel arm tool, but more compact front-to-back, which could be advantageous on some lathes I suppose. And building something unusual and challenging is part of the fun, isn't it.
Great job again.👍 I envy you to have as many time as you make thread tap instead of buy a factory made one. You put a huge effort a cheap job… but you know. Overall I like your channel, and keep it up.👏👏
I would definitely be thinking of 'giving it a go' with the ole follow rest. To remove any flex the tool forces upon the lathe. Or can the follow rest possibly is not offset enough. Your lathe. Your sandbox. I was just interested.
I’ve done that before and it rounds off and leaves burrs on the cutting edges so you have to take a light pass and clean up the threads on the lathe. Doing it this way leaves a sharp and clean cutting edge as you create the flute.
@@artisanmakes Take a look at the latest Inheritance Machining video on him making a lead screw. Might give you some ideas, as he mills the flutes before hardening. ruclips.net/video/1l2_uCyBXQ0/видео.html
I don't know how these are supposed to work, could you explain why the axis of the rollers aren't aligned with the axis of rotation of the part? Wouldn't that reduce the side load applied to the spindle?
Nicely built, but I would never use this system if you do not want to load the bearings, the slightest alignment error in height or deviation in the thread will still exert a lot of pressure on the spindle bearings. I would have gone for a floating knurling tool, then you can be sure that the spindle bearings are never overloaded. merry christmas, cheers ben.
I really don't like how unsafe you handle cherry red metal but after i saw the results of your work I got intrigued what you will build in the future you have quite some talent and a keen eye for good design details
Align the rollers with the axis of rotation and PUSH on the work to let it cut. That's a hell lot of work you've put in there, try to get proper results
The problem of this style vs. a C-Clamp style on Knurling Tool is the C-Clam has longer arms which means it can Knurl larger diameter pieces than this can... I'd guess, you'd be lucky to be able to Knurl anything larger than 1.5 inches in diameter without starting to put excessive side-loads on the bearings where a C-Clamp tool can Knurl pieces with a diameter up to almost twice the length of the arms... Still, if you don't need to Knurl large pieces, this is just fine for your shop... Happy Christmas & Merry New Year!
I grind the flutes in after hardening because it gives a cleaner edge and doesn't kick up burrs, so there is no need to clean up the threads. Although I only do this for V thread taps
I have zero idea so please forgive my lack of knowledge at 7:28 would it make any noticable difference if the part has been center punch before hand? Or rigidity of work holding + mass of the mill and chuck does good enough of a job that makes it obselete?
Its a split point drill so its pretty good at not wandering without spotting first. In fairness I probably should have but I think I got lazy there or forgot to
A good idea would be to make the main body be able to float verticaly. otherwise it's essential that the alignment ist allways perfectly on centerline.
Hello Artisan, it looks really cool, but is hope less, you should have made the scissor type knurling tool, the reason why will be obvious in so many ways. Merry Christmas and Happy New year to you and your family, thank you for all the videos you created throughout the year, cheers from me.😷👍
first time i see your channel ,like it . were are you based ? i suspect australia , am i right? hahaha i ask this becorse the first vid i see was about ya knew lathe and i am curious if the price was in ausy ,us or british curancy ( makes a big dif he), my self i am belgian expat in the Philippines and i been thinking of buying a small lathe for quite some time as i used to use the lathe quit often before i retyerd from the navy ( navel technical engeneering and repairs) greets Dirk ps excuse my spelling ,never was teached english so my spelling is of at times, ican live with that ,hope u2 hehehe
Nice to have a lathe that is able to trhread in reverse now! How would you have made the left thread with the old lathe? I like your projects, a real inspiration.
Ah, that's nice. I'm still concidering making an extra 1:1 gear on mine or going for an 'electronic leadscrew' on mine. An electronic leadscrew will probably be more work to make but will make special threads and switching between threads easier. Now, like on your old lathe, I need to change gearwheels all the time and make special gears for special threads (*3D-printing*) @@artisanmakes
12:15 whenever you have parts that have excentric features that can act as lever arms under the load of the cutter, use a small clamp on the far feature. Any cheapo C clamp will do (you don't need the fancy ones). Even bailing wire would've worked. I'm not saying this cause you lost the part's position there, not that big of a deal, but because you used that wood cutter, had the part come off entirely, caught the cutter, it would've broken off the shaft (i have seen this happen in wood). Have you seen the kid show "bey blades"? It's like that, but it seeks you out and tried to shave some bits off you. Just my 2 cents.
I saw the part move at 12:16 in the mill and almost had a heart attack. I'm glad it didn't mess anything up to bad. I was legitimately worried for a second.
Excellent job on the knurler! A couple of things:
- For the "perfect knurl" look, diameter of the stock is important to have a perfect pattern.
- As others have mentioned, the way you were using the knurler, still causes the work to deflect. Centering the knurl rolls with the work and clamping in, to the desired depth of pattern will produce better results.
Overall great job and Merry Christmas!
indeed, the pattern needs to be much deeper to look proper
I noticed that right away too, if the rollers aren't centered, they will push on work material.
Good stuff.
Yeah I never understood that about knurling. The diameter would have to be some even multiple of the spacing of the knurl pattern for the patter to match up on each revolution, right?
There’s a formula for it. I never use it. Sometimes I get lucky and sometimes I have to take down the diameter slightly.
Next project self made bandsaw?
i'm hoping that he'll buy a cordless handheld bandsaw, but then treat it like a hacksaw and never turn it on
I have offered to send him a portable bandsaw like 3 times
Wastes a lot of time and material when he drills out a block like that scrap.
He's still yak shaving up to it. Lol. Honestly, I like the meme, but it must be such a chore.
It's definitely a meme now that he is riffing on. Ie he cuts with a hacksaw just to 'rile people up' (in a fun, non-harmful, non-offensive way).
Also, he did a vid last week doing a 'shop tour' and his workshop area is a shared space with his granddad (he must be so proud of his grandson btw) and is absolutely TINY. I kid you not, there simply is NOT enough space to store one at all (not even handheld style). It would get metal dust everywhere, and in such a small area, everywhere includes the leadscrews and ways of his mill and lathe....
You can see the difference your stiffening process has made to the mill, spot on
Suggestion - a big handle on top to turn the lead screw. You'll get immediate feedback through the hand and be able to increment the pressure gradually.
So, the disadvantage of this type of knurling tool compared to a scissor type is you're limited in the maximum diameter by the stick out of your wheels from the main body. With a scissor type with properly bent arms, you can do much larger diameter knurls with standard sized wheels.
The trick to getting a good knurl is to put a lot of pressure on the wheels. That prevents double tracking. You also want to get the wheels to contact close to 180° from each other to prevent them from trying to spit out the part and putting all that side load on your spindle bearings.
Don't worry about doing diameter calculations based on the pitch of your knurl, the diameter is going to change as the wheels bite in anyway. It might matter for a really course pitch knurl like a rope knurl or dial engraving knruls, but not the standard stuff you have. Double tracking is just a sign of insufficient tool pressure.
Mr. Pete discussed knurling details and talked about making tens of thousands and never dialing in the OD.
I did some calculations. On a nominal 1" OD part the difference in diameter between even tooth counts is 0.023" (0.58mm) for course, 0.015" (0.38mm) for medium, and 0.010" (0.25mm) for fine. And that is if the wheels just touch the OD. But you will bury the wheels somewhere between 0 and 50% of the tooth profile, i.e., change the effective OD by 0% to 50% of the above numbers. That's only 0.005" for fine. These numbers are within the realm of machinists but knurlers don't have any means of precise adjustment.
This is all for to say that few could achieve a successful knurl if the OD required such close tolerance.
L
Who needs a band saw when you have these 💪
I just watch Inheritance Machining make an acme tap and it was hard to turn until he ground some relief on the leading teeth of the tap and hs simply did that with a Dremel type tool. (in case you. are interested)
All your parts came out beautifully and the final tool is a work of art. Enjoyed, Merry Christmas!
Inheritance is fantastic. Abomb is also a good watch. Curtis at Cutting Edge Engineering is also a very skilled craftsman.
I encountered all of this in my two tap geometry videos about 6 months ago.
All that’s to say is I just forgot to add it here. I think I was a bit too focused on not wanting to remake the tap :)
I'll check that out, thanks for the heads up!@@artisanmakes
Good to see you using up even the gnarliest looking offcuts to make your projects!!
Clamp knurling for the WIN! Excellent work btw!
Love all your videos. I hope you keep them coming.
Thanks for all of these videos, you're a huge inspiration to me. This is my new favorite channel, im hooked!
One trick on knurling that has worked for me is to center the top and bottom rollers and just make contact then back off the cross slide and tighten you adjustment just a hair then turn the piece by hand as you slowly move the cross slide back to where the wheels are centered on the piece top and bottom (kind of like a scratch pass when threading) and check the pattern after you have turned the piece by hand, if you are getting a double pattern or misalignment then turn .001 (one thousands) off the part and try again. This will allow you to get a proper pattern started then slowly turn in the adjustment knob until you get to the depth you want when knurling, you may have to do it a couple of times but the pattern will come in proper.
Great jog, Artisan. I'am starting with Lathes. My first one will arrive next week. I'm learning a lot with yours videos, Thank you.
Another great tool made. Thanks for all this years conten,t looking forward to next years .Re Ken
I have always been impressed that you make so much of your own tooling even down to taps. I can buy a decent quality M8 HSS LH tap for less than £10 here in ths UK. If was using them all the time, I'd probably go for a set of Presto's that I could get at Cutwel, just down the road for around £50.00. I just couldn't be bothered with the hassle of making one.
For a left-hand thread set? That's a nice price. But still, for one-time-use all those things get pretty costly. Though nice to make your own tools for your projects instead of buying.
Out in the Colonies however Hardware tools shops are not so common around the place. I live in a capital city and if I needed one on a weekday I would have the choice of maybe 3 stores that might have one within 20klms.
@@dazaspc I'm lucky about where I live I suppose, it used to be one of the biggest machine tool manufacturing areas in the UK around here. Colchester Lathes are only 3 miles away and Cutwel are one of the largest cutting machine tool suppliers in the UK. Lots of smaller suppliers still exist, although not as many as when we moved here 30 years ago. Where we would like to retire to wouldn't have anything within 75 miles that I could pop out and pick up.
I'm pretty sure it is even less around here. Most hardware-stores have closed during the last around 10-15 years and only some basic ones exist and they don't have those special tools like left-threathing taps indeed. And I live in a 'Metric country'. @@dazaspc
Most things need to be mail-ordered nowadays ;-(*
10:08 good to see the old band saw getting some use 😂
Imagination is more important than knowledge. For while knowledge defines all we currently know and understand, imagination points to all we might yet discover and create.
It helps a lot when you cut or grind a relief on the threads.
Nice Job by the way👍
That tool height is going to have to be set spot on centre, or you’ve just shifted the spindle load 90degrees.
The advantage of the scissor type knurlers is that they apply even pressure, even if the tool height isn’t dead centre.
Also, the diameter you’re cutting is the reason for the shallow double knurl.
Either way, it’s a great looking tool and a challenging project. Well done
It doesn’t. There is play in the retaining pin so the whole assembly can shift up or down a few mm to account for not being perfectly on centre height. Cheers
Excellent build. Typically with this style of knurling tool you touch off on the work near the end of the workpiece then back off the carriage. You then adjust the 2 wheels to desired knurl depth, start the lathe and move carriage back to centre line. then move axially. Use air and fluid to get rid of chips. Alternatively, turn a small bit of the end to desired knurl depth, set wheel depth to that and then move to end of actual work piece. Dorian, Zeus and other brands have good descriptions in their catalogs.
Thanks for the tip, ill try that out next time I use it
Imo having reverse threads on one side, and a stop to keep it centered is unnecessary constraint, you could as easily have tapped the bottom jaw and done a clearance hole on the top jaw, and without the stop in the middle, it would center itself vertically, and be way less annoying to make.
I guess so. But there is play in the retaining pin. That recess I cut into the centre is larger than the pin so it allows for the whole assembly to shift up or down to align itself
I'm so relieved!
Even 1 or 2 great RUclipsrs that I respect and admire (along with more than a few "orhers") jumped on the kit band wagon and it was so annoying.
Especially one (from my own country I'm ashamed to say), that's made a whole bunch of the kits.
All for promotion/free etc and it's frustrating!
Well done for originality!
Nice work! Maybe add a small knob ( knurled of course) to the top of the adjustment screw to tighten it? Not too large to allow clearance to the chuck.
Just want to say you’ve become my favorite RUclips machining channel this year
I know you can get the pattern wheels cheap, but I would still love to watch a quick video of you making some.. some standard ones for diamond knurl, some straight ones, and maybe some for the rounded ring knurl
Love the videos, I learn a ton! (just got a mini lathe myself after wanting one for like 16years :D)
It would seem your mill needs a larger motor as well. Seems to struggle with the slitter blade. Great content.
Great job. Merry Christmas ⛄⛄
I like this tool design. I was wondering how you were going to get even pressure on both wheels compared to the scissor type. I think letting them float on the adjustment rod should do it if you have the height set right.
The final example knurl could still do with some work though as it was double 'cut' on one wheel and single on the other. It should be looking like even diamonds if the wheel pressures, and feeds and speeds are correct.
Nice work!
Great job, one of your next projects should be a small heat treating oven, on with a PID so you can temper too.
Keep up the good work
Another nice tool for your using, bravo! 👍💪✌
I was always taught ro knuwl at a spindle speed ad slow as the lathe will turn, with a feed rate as fast as the machine can do. Plenty of neat cutting fluid. Heavy cutting, or tapping oil. But ifcause a clamp style tool like the one you made as to a push style is superior
I just watched your video and it is interesting to see what you have created. I do knurling every week for work that we have multiple types and sizes of wheels we use. There is a easy way to figure out a calculation for the wheels you are using. No matter what they will align after a couple rotations of the bar. A easy way to figure out the size you need to make your parts OD is to make a line on the wheel and with paper, dip the wheel in ink or paint and with a marked point set it down and push the wheel multiple times over until it makes a full rotation. Count how many lines it makes in the distance. Divide the distance in inches by how many lines it makes. You can then use that number for the equation as following, we will use Number figured out as X and OD size, 2" Bar divided by X. The Number resulting will always be a ##.####. Take the Whole number removing the decimal spots and then times it by X. The resulting number should be less then the original OD size and when you knurl the OD at that size you will find it will easily knurl cleanly no matter the pressure. You will have to redo this method for every different size wheel and knurl shape but it will make you life very easy after figuring out what OD it needs to be. Remember when you knurl it will most likely push up back to the same OD size or similar size as before.
I know a lot of people have different approaches but I find this helpful and a Master Machinist taught me this method. I am very happy to know it now because knurling was extremely hard before. If you want to see examples or a picture feel free to message me and I can discord message or email it to you. Keep up the good work!
you most definitely need a band saw project on the channel
nice :) a few advices: try to fix the slitting saw runout, will help with saw life. Try using loctite 638 instead of 243 for a better bond. As far as knurling goes, i was using coolant when knurling, try to be at the perfect center and i was running it slower with power feed. You can get pretty good diamond pattern even on steel. If it is making a double criscross pattern, make a diameter of the piece a little smaller and try again :)
Hi. Not seen one made that way. Nice machining as usual. Merry Christmas.
Steve.
thank you ! happy holidys from the states 🙂
Aluminium is close to working with hardwoods so can use a lot of woodworking bits when necessary. Nice work on another creation. Looks a bit like a Zaytran gripper.
Nice build! Noticed the amount of sparking and spattering when you were welding, looks like you had some contamination (or lack of shielding) going on which may have contributed to your weld issues. Keep the builds coming!
to get a good knurl finish you need a very rigid setup where you can apply a lot more force with fewer passes. the more passes you do actually starts to ruin that result rather than make it better.
You might want to check the preload on the spindle bearings. The milling you were doing on cleaning up the material for the knurl arms at around the 6:29 mark forward show a lot of vibration in the Z axis (you can actually see the spindle moving up and down in the spindle cartridge) and it's even reflected in the finish.
Don't the top and bottom rollers need to be at dead top a s bottom of the work so no side pressure reaches the work?
If you do a lot of knurling, a big, chunky hand knob on top of the lead screw would be great!
There is another type of Knurling tool that works very well for parallel knurls and it uses 3 wheels.
The one I made didn't use a LH/RH thread and only a screw on each but still gets it done. I used the head of a self centering knurling tool as the bottom support tool and a single as the top. I had to make about 200 pins that were 5mm in diameter with a heavy parallel knurl on them. I measured them making contact with a 5mm pin in the chuck then made note, installed some 5mm stock for the pins that was about 2 meters long and set the knurl slowly to full depth at the chuck end then set the lead screw to move at about a 4mm pitch and let it rip (Well maybe not rip at 40 rpm) and did the knurls in one go on each bit of stock. It worked surprisingly well except for the knurls had a slight rotational lead on them. If I could have run the lathe slower it would have been OK, but for the length of pins I was making it was fine. Because the material was trapped inside the tool no deflection worries and a consistent depth for the entire length.
Really enjoy your videos. Thank you for sharing. Great video work also.
Merry Christmas to all ✌️❤️
why quench with water?
Well done Sir, you always astound with your designs. Merry Christmas and an Happy, Healthy and Prosperous New Year.
watching your drilling/slitting saw operation, you need a small bandsaw. Look at Harbor Freight for their Herculese saw and the bandsaw saw base. Makes for a small hand saw, table bandsaw, and miter saw, all in one. Small footprint.
Dorian makes knurling tools of this general configuration. (Download their knurling tool catalog. It's quite a treatise on knurling.) Much more complicated than a scissor or parallel arm tool, but more compact front-to-back, which could be advantageous on some lathes I suppose. And building something unusual and challenging is part of the fun, isn't it.
Nice concept! :)
Great job again.👍
I envy you to have as many time as you make thread tap instead of buy a factory made one. You put a huge effort a cheap job… but you know.
Overall I like your channel, and keep it up.👏👏
This was awesome great content 😊
Nice job, basically the same as the Aloris #19 adjustable knurler, without the big price tag.
@@artisanmakes I'm a Aussie though.
Bugger I replied to the wrong comment. Must have had too much eggnog
@@artisanmakes Lol..
How are you gonna' keep us entertained if you ever get a bandsaw? Great project and Happy New year!😆
Very nicely done.
Happy holidays and best wishes to you and yours! ⭐🙂👍
Why didn’t you cut the flutes and square top before hardening? Is there some sort of technical reason?
Inheritance Machining made one very similar to this. He makes a lot of cool tools you may find useful as well.
Yeah that’s a scissor type knurl from Hemingway kits. This is a clamp style
I would definitely be thinking of 'giving it a go' with the ole follow rest. To remove any flex the tool forces upon the lathe. Or can the follow rest possibly is not offset enough. Your lathe. Your sandbox. I was just interested.
Near disaster at 12:15!! Why wouldn't you mill the flutes before hardening?
I’ve done that before and it rounds off and leaves burrs on the cutting edges so you have to take a light pass and clean up the threads on the lathe. Doing it this way leaves a sharp and clean cutting edge as you create the flute.
@@artisanmakes Take a look at the latest Inheritance Machining video on him making a lead screw. Might give you some ideas, as he mills the flutes before hardening.
ruclips.net/video/1l2_uCyBXQ0/видео.html
He does, I don’t. I think this is the better way of doing it for v threads. Milling beforehand works better for acme and square threads
I don't know how these are supposed to work, could you explain why the axis of the rollers aren't aligned with the axis of rotation of the part? Wouldn't that reduce the side load applied to the spindle?
How do you keep your stuff held down seeing that you are in a country that is upside down?
Gravity is a myth, the earth sucks...
Nicely built, but I would never use this system if you do not want to load the bearings, the slightest alignment error in height or deviation in the thread will still exert a lot of pressure on the spindle bearings.
I would have gone for a floating knurling tool, then you can be sure that the spindle bearings are never overloaded.
merry christmas,
cheers ben.
There’s float in the lead screw to let it move a few mm. Cheers
Aloris makes a knurler of exactly this type with provisions for directly mounting on a QCTP.
I think it's a good design.
Neat. Not hugely familiar with the aloris tool range
@@artisanmakes Google "Aloris BXA-19". They run $300-$400, depending on supplier.
I really don't like how unsafe you handle cherry red metal but after i saw the results of your work I got intrigued what you will build in the future you have quite some talent and a keen eye for good design details
Better tongs for one. I was supposed to get rid of them two years ago. Cheers
@@artisanmakes nice, i get the bell ringing then, don't want to miss your next videos. chears
Great project.
Align the rollers with the axis of rotation and PUSH on the work to let it cut. That's a hell lot of work you've put in there, try to get proper results
Great job on this tool! Curse you left hand threads!
Attempt #5 - what 4-jaw chuck can you use for your lathe? Post a link.
Neat!
6:18 is the cutting tool ok with this amount of load cycling?
The problem of this style vs. a C-Clamp style on Knurling Tool is the C-Clam has longer arms which means it can Knurl larger diameter pieces than this can...
I'd guess, you'd be lucky to be able to Knurl anything larger than 1.5 inches in diameter without starting to put excessive side-loads on the bearings where a C-Clamp tool can Knurl pieces with a diameter up to almost twice the length of the arms...
Still, if you don't need to Knurl large pieces, this is just fine for your shop...
Happy Christmas & Merry New Year!
This should do roughly 50-60mm pieces. In that that’s the capacity of the tool
Why was the square drive ground in after hardening? Couldn’t it have been milled in before hardening?
Agreed. I'd have milled the flutes woth a ball end mill too, hardened then just tickled it with the grinder to sharpen.
@@ThePottingShedWorkshopI was thinking that maybe there was a good reason that I wasn’t aware of.
I grind the flutes in after hardening because it gives a cleaner edge and doesn't kick up burrs, so there is no need to clean up the threads. Although I only do this for V thread taps
Brilliant!
Why did you harden it then shape it?
It gives a cleaner cut and cutting edge without creating burrs
Good job mate
I have zero idea so please forgive my lack of knowledge at 7:28 would it make any noticable difference if the part has been center punch before hand? Or rigidity of work holding + mass of the mill and chuck does good enough of a job that makes it obselete?
Its a split point drill so its pretty good at not wandering without spotting first. In fairness I probably should have but I think I got lazy there or forgot to
A good idea would be to make the main body be able to float verticaly. otherwise it's essential that the alignment ist allways perfectly on centerline.
There is a bit of play between the retaining pin and lead screw to allow for this. Cheers.
I see ,that certainly helps a lot. marry christmas and cheers mate@@artisanmakes
Did you chip any inserts when cleaning up that offcutt?
Good stuff
Hello Artisan, it looks really cool, but is hope less, you should have made the scissor type knurling tool, the reason why will be obvious in so many ways. Merry Christmas and Happy New year to you and your family, thank you for all the videos you created throughout the year, cheers from me.😷👍
So many ways? Bigger diameters I think. But this stuff seems to work okay
first time i see your channel ,like it . were are you based ? i suspect australia , am i right? hahaha i ask this becorse the first vid i see was about ya knew lathe and i am curious if the price was in ausy ,us or british curancy ( makes a big dif he), my self i am belgian expat in the Philippines and i been thinking of buying a small lathe for quite some time as i used to use the lathe quit often before i retyerd from the navy ( navel technical engeneering and repairs)
greets Dirk
ps excuse my spelling ,never was teached english so my spelling is of at times, ican live with that ,hope u2 hehehe
Pretty cool...what is the largest diameter round you can put knurling on?
Keep em coming!!!!
Largest this one will do is 60mm
Hah :D When I saw the video on recommended, I thought it was Inheritance Machining :D you have very similiar logos and thumbnails.
Nice to have a lathe that is able to trhread in reverse now! How would you have made the left thread with the old lathe?
I like your projects, a real inspiration.
The old lathe could do reverse threads too. It had a lever to reverse the lead screw direction
Ah, that's nice. I'm still concidering making an extra 1:1 gear on mine or going for an 'electronic leadscrew' on mine. An electronic leadscrew will probably be more work to make but will make special threads and switching between threads easier. Now, like on your old lathe, I need to change gearwheels all the time and make special gears for special threads (*3D-printing*) @@artisanmakes
Por 👏 ta 👏 band 👏 my guy
Nice work! Was that rain I could hear?
By the end of it , yeah.
You could have used the same tap but turned the part upside down
i love this c-word (aussie) i love your content brother woooopopooooo
12:15 whenever you have parts that have excentric features that can act as lever arms under the load of the cutter, use a small clamp on the far feature. Any cheapo C clamp will do (you don't need the fancy ones). Even bailing wire would've worked. I'm not saying this cause you lost the part's position there, not that big of a deal, but because you used that wood cutter, had the part come off entirely, caught the cutter, it would've broken off the shaft (i have seen this happen in wood). Have you seen the kid show "bey blades"? It's like that, but it seeks you out and tried to shave some bits off you. Just my 2 cents.
I saw the part move at 12:16 in the mill and almost had a heart attack. I'm glad it didn't mess anything up to bad. I was legitimately worried for a second.
Good spotting. Itt was almost a code brown moment there
Maybe you might want to acid sharpen the pattern wheels so it bites better and deeper, though not expert when it comes stamping witch this kinda is.
Oh nice!
salve sono un nuovo iscritto veramente bello bravo mi potresti dare un link per il flussante tempre grazie
cool beans
you need to make yourself a band saw
A knurl serves more purpose than just aesthetics. The pattern describes the way the component is moved
If you do 90deg crosshatch then it doesn’t, really
@@Monoryable sure it does; describes axial AND linear movement
Next project, knurled knurling tool for knurling unknurled surfaces.
Масер сделал такую сложную работу, но не смог сделать правильно накатку. Ну как так?
That slitting saw looks like it's only cutting on like 2 teeth