Helmet hangars are absolutely necessary when you have a fleet of lids like you do haha!! My 3D printed ones are curved so the inner lining of the helmet doesn’t get pressure point compression where they sit. I absolutely love pipe “Industrial” looking stuff like you made there, well done bro!! …oh and your dad said you don’t listen!! 😂
CHOPPERFETT, Very cool Helmet Rack. That’s a great idea. I definitely should look into building something like that for all my Caps. Enjoy the rest of your weekend.
you crack me up son! A chip off the ole block for sure! Nicely done! (and the video was great too!) LOL I bet those wet parts came over on a slow boat from China...that stuff surely wasn't a new strain of anything we hope! HAHA
I really need something like this. I’ve been using basic hooks on a cabinet or the work bench. I need to start revamping my garage space to be a better recording studio
Hey I got a shirt like that!!!! Great idea and great video buddy!!! I might have to make one for myself...even though my helmet collection is t anywhere near good as yours is (helmet King 🤴)
I agree, it hasnt made its way on the wall yet... my garage redo has been delayed for a couple weeks. I'll def post a picture once its up and displayed!
Very crafty and pretty cool!! I'll be sure to share this video with TommyG so he can get right on this!! And poor Mr. McStache needs all the shout outs we can give him right now! Take care and thanks! 😊👍🏍️💜
Looks good man! I've been bugging our local motorcycle shop to install these next to the service counter for YEARS! You have to either balance the helmet on your boots or try to tuck it under your arm or something while filling out paperwork. It's dumb & they always say, yeah, they need to put up a rack, but never do haha. If I were king there would be helmet racks for everyone!
Cool way to show case your lids Chop! I also like the option of getting those ikea square shelves. Right now mine are just hanging off of random coat hooks in the garage.
Yea I thought about the floating shelves thing, but we have thunder here that feels like an earthquake... I'd be very sad to see my $400 laying on the floor from rattling off hahah.
Looks pretty cool. I need to organize my stuff first, the room I keep everything in is a mess lol. Then maybe I can start thinking about something like this.
as an Aussie could I get measurements in Millimetres? haha but in al seriousness when you went from a decimal point ti fractions I was impressed. Always got to Star Pattern! like Homer Simpson film editing "and Star Wipe" some burn marks would look cool with the back piping
When lumber prices go back to normal you'll have to change the title from $50 to $25 😂 NIcely done - I like the industrial look with metal pipe (I have shelving in my office that is the same style)
Great stuff brother!!! Given me some insight and inspiration definitely!!! Have you done anything new or thought on a new design in regards to bettering your DIY rack?
Not really. This thing has served its purpose well. One could make this a ton cheaper if they used PVC piping I think though. You don’t really see the pipe once the helmet is installed so that “aesthetic” is rarely seen
Well, that was the second one I made since I had the measurements. And they are still not on my wall to display, my garage project has not made ANY progress lately :(
1:52 - 😂😂😂😂😂😂😂😂 I LOVE THIS!!!!!! Freaking hilarious!!!!
Looks like a great job!!!!
Hahah Thanks.. I might have made that edit super tired hahaha
Helmet hangars are absolutely necessary when you have a fleet of lids like you do haha!! My 3D printed ones are curved so the inner lining of the helmet doesn’t get pressure point compression where they sit.
I absolutely love pipe “Industrial” looking stuff like you made there, well done bro!!
…oh and your dad said you don’t listen!! 😂
Hahahaah yea I'm well aware I don't listen very often hahaha. Stevie gave me the inspiration for the look!
Motorcycle Carpentry, my high school didn’t have that shop class option. Nice job.
What kind of rickety rack school was that? LOL
Mr McStache is a classy guy.
Beyond Classy!!!
Nice idea, thank for posting and saving everyone who wants one some $$$
Thanks for watching! All about saving people money hahah
CHOPPERFETT, Very cool Helmet Rack. That’s a great idea. I definitely should look into building something like that for all my Caps. Enjoy the rest of your weekend.
For sure, with ball caps you could make a much smaller version of it too and save some cost!
you crack me up son! A chip off the ole block for sure! Nicely done! (and the video was great too!) LOL
I bet those wet parts came over on a slow boat from China...that stuff surely wasn't a new strain of anything we hope! HAHA
Turns out its a rust preventing agent, which makes sense for piping
Awesome job, I'm might make one so I can hang up my retired helmets. Great video ChopperFett 🤘💀
Yea for sure! I bought some cheap hooks off Amazon and found a board for my retired as well. Thanks for the watch!
The oil on the back iron is to keep it from rusting. May be use galvanized or pvc.
That actually makes a lot of sense! Thank you for informing. Great alternatives too!
Omg you have saved my life! I was gonna buy one but that one it cooler then anything I have found!
Hahah very sweet! Glad I saved ya some moola!
Another well done video !!
Thanks I do appreciate that!
I really need something like this. I’ve been using basic hooks on a cabinet or the work bench. I need to start revamping my garage space to be a better recording studio
That was my "intent" this year..... but sadly I havent gone but as far as to make these racks hahah.
This is a great idea choppafett I need to make one mysel.
Thanks man, it took me about 40 min WITH filming to do this one, so not much time investment either!
very cool man! I was literally just thinking about an angle pipe helmet rack the other day
Very cool man, they are super easy and they look pretty good when done too.
Hmmm, looks familiar......turned out nice mate 👍
Yep I had quite the inspriation!
Hey I got a shirt like that!!!! Great idea and great video buddy!!! I might have to make one for myself...even though my helmet collection is t anywhere near good as yours is (helmet King 🤴)
Not many do have this many hahah. I have decided to retire 4 or 5 of them, I'm gonna make a special rack just for them.
Thats cool, I would have to hang mine in the house, I don't want any creepy crawly things inside my lid 🤘🤘
Oh Trust me they get a check before I put my dome in them hahah.
great work Chopper!!!
Thank you as always!!!
Thanks for the video. Need to see what it looks like with your helmets hanging on it.
I agree, it hasnt made its way on the wall yet... my garage redo has been delayed for a couple weeks. I'll def post a picture once its up and displayed!
Thumbs up I did not know you were a carpenter looks great man take care catch you later brother
Oh trust me, I'm not hahaha. Thanks as always!!
Very crafty and pretty cool!! I'll be sure to share this video with TommyG so he can get right on this!! And poor Mr. McStache needs all the shout outs we can give him right now! Take care and thanks! 😊👍🏍️💜
Oh no! I just read this and not sure what happened? I saw a post with Ozarks but havent put it all together yet.
@@ChopperFett I think its good now! Looks like there is a new ride 👍🏍️😊
Looks good man! I've been bugging our local motorcycle shop to install these next to the service counter for YEARS! You have to either balance the helmet on your boots or try to tuck it under your arm or something while filling out paperwork. It's dumb & they always say, yeah, they need to put up a rack, but never do haha. If I were king there would be helmet racks for everyone!
Hahah I hear ya man. I always have to carry mine around with me at the dealer... they must assume none of us use them hahah.
I am cheap, mine are in the shop and I just bought $1 round cereal containers at the dollar store and they sit on those on a shelf above my coat rack.
You sir are a bonafide genius!!! Seriously, that is a great idea!
Great idea and it looks good. Cheers
Thank you so much!!!!
Nice 👍
Thank you kind sir... not quite dickin around in the shed but for a simpleton like me, it'll do haha.
bro this is awesome!!! Great share!!
Thanks man, glad you enjoyed it!
🤙🏾🔥
Bloody good idea. Might use pvc piping instead just to keep it a little lighter. Good project. 👍🏾
Lighter and cheaper man!
That looks great man!
Thanks man!!!
I love EL tapo 😉
Hahahah thank you!!!
I like your shirt I have the same one lol. a helmet rack from the Helmut KING
It was only fitting huh?
ChopperFett yep that’s for sure
Cool project. Nice way to keep your helmets out of the way and almost like a display. Nice!!
Thank you thank you! Now to get them on the wall!
Haha Frigging love this video. from Pea Tear Griffin hehe to James bond! but wait theres math involved?
also love the Mandalorian send off
haha Thanks man, gotta keep ya'll entertained hahaha.
DIY’s love it!!!
This is a great idea! Excellent way to store them and keeps them organized!!!
Cool way to show case your lids Chop! I also like the option of getting those ikea square shelves. Right now mine are just hanging off of random coat hooks in the garage.
Yea I thought about the floating shelves thing, but we have thunder here that feels like an earthquake... I'd be very sad to see my $400 laying on the floor from rattling off hahah.
Looks pretty cool. I need to organize my stuff first, the room I keep everything in is a mess lol. Then maybe I can start thinking about something like this.
I keep organizing my garage, then I do something like this, make a mess and have to start over again!
If only this was brought to my attention yesterday! I bought one on Amazon …oh well cool Project though .
Haha thats the way it works out. What one did you order?
as an Aussie could I get measurements in Millimetres? haha but in al seriousness when you went from a decimal point ti fractions I was impressed. Always got to Star Pattern! like Homer Simpson film editing "and Star Wipe" some burn marks would look cool with the back piping
Hah yea it would look cool with some burning... but I'm not very capable hahahaha.
@@ChopperFett just dont set the house on fire
Nice! 👌🏻👌🏻👌🏻👌🏻
Thanks man!!!
Nice shirt. Wait that only holds 3 helmets, are you going to build 6 of them? Lol nice work
Hahah Two built and I have materials for a cheaper version as well to hold 4 more hahah.
@@ChopperFett I might be interested in the cheaper version as whatever I build will be a modified version due to wall space in the garage
When lumber prices go back to normal you'll have to change the title from $50 to $25 😂
NIcely done - I like the industrial look with metal pipe (I have shelving in my office that is the same style)
HAHAAH well I didnt think about that! I just make a whole new video upload and double my watch time? hahaha
Great stuff brother!!! Given me some insight and inspiration definitely!!!
Have you done anything new or thought on a new design in regards to bettering your DIY rack?
Not really. This thing has served its purpose well. One could make this a ton cheaper if they used PVC piping I think though. You don’t really see the pipe once the helmet is installed so that “aesthetic” is rarely seen
@@ChopperFett more then fair 😎
Do you have any ideas for future projects around motorcycle gear?
Good to see you have a place for your thousands of helmets! 😂😂😂
I know right?!?! I need to retire some now!
@@ChopperFett Dude, I am getting there too with the number of helmets I own!!
Black iron comes covered in oil because it corrodes easily
That makes total sense actually!
As long as it works.
Yes sir! Thanks for the watch!
no tool time grunts?!?! Dammit man!
I know I know, total SLACKER!!!!!
Your a dangerous man with a drill in your hand.... 😁🤣🤣✌
I have a license to drill.... hahah dad pun!
@@ChopperFett Bahahaha!!
BRO...WTH? you didn't show any helmets on it?
Also, you gonna need more racks LMAO
😂😂😂
Well, that was the second one I made since I had the measurements. And they are still not on my wall to display, my garage project has not made ANY progress lately :(