Hey brother, F.Y.I. I just got the FMA AN/PEQ- "UPGRADED VERSION " and the I.R. cap is the same as yours. It has a "ring" if you will around the edge of the window that keeps the cap from seating flush o to the lens of the illuminator. I simply took my Dremel tool with a cut off wheel and VERY CAREFULLY ground it flush with the rest of the cap. Now it fits flush on the lens and almost no white light escapes . You could also do this with a razor blade if you dont have a Dremel. Hope this info helps. Lou
Is there any possebility to re-code or otherwise make the illuminator not strobing? And also just the illuminator and not laser combined? I got the exact same two, I'll be using the laser as a flashlight but it would be nice to be able to use the illuminator too...
@@nicolas6226 I did the same, no answer, the laser works just fine but that illuminator is utter trash! Really shitty for something so expensive (airsoft wise) :(
Have you experienced any problems with adjusting windage on LA-5C? Because mine is way off to the right, so in the leftmost position the dot is still to the right of the BUIS. On the other hand, the pressure switch on mine doesn't have the same contact problems as yours. So far, it seems that build quality varies greatly, which isn't very good news, given the price... : (
So mine is off to the right of my ironsight at a distance of 25 feet, but it also depends on the distance of the zero, if you’re trying to have a zero of less than I’d say 50-75 feet that may be an issue, but as you have a further distance between you and the zero distance, it being turned full left maybe be off at say 25-30ft but it may close that gap at further distances.
Also, the way you’re supposed to zero anything like a scope or a laser is the L/R U/D it’s where you want the laser to go, it’s where you want your rounds to go. So if the round is left of where you’re aiming with the optic or laser, you adjust the turrets toward the R on the turret. So even though the laser is in the furthest left position of movement, when you shoot, the POI is gonna be to the right of the POA
Major problem (sadely) : Color of aluminium parts, shapes of the battery cover (better on old FMA), covers for laser and illuminator, and this F****G ugly serial !!! And WHY A STROB ??? :(
Nicolas yeah for most people it’s a problem, I’m indifferent about it, although I wish they did make an illuminator only setting because I could see a use for the strobing. I typically just use my IR flashlight setting for illumination
@@proxxy04 Same, I have an Surefire M300V ... But for the price ... And above all, they never talked about a strobe, even in the manual. For me, look like an technical problem ... Laser with this power witouth an management card have this symptom ... And that often gives a very short life to the components of the same cicruit, so both lasers ...
Odin Milsim so it has an issue with the adjustments we here even the laser being full left it’s still very off set to the right. But I fixed that by taking it apart and filed down the brackets inside so that when the knob is turned full left it actually is able to go to the left of center
@@proxxy04 thanks mate, sounds like a lot of work, for the money you would expect that they could have sorted that issue as well as the strobe problem. I do want a PEQ as I have 2 G&P dbals that work great, just they look a bit shit lol
@@proxxy04 Thanks, it's already great to know that it is repairable since customer service told me the opposite 😆. I looked into it today and removing the potting glue reveals the hex screws beneath it. May I know if we need just to removed the three screws on the back (with the mounting plate) or have to remove the screws in the front as well?
Thanks for the review.
Miss PEQ FMA play music when the IR illuminator is turned on, lol
I'll stay with my Dbal G & P
Thank You for a great review. That's helps a lot.
Hey brother, F.Y.I.
I just got the FMA AN/PEQ- "UPGRADED VERSION " and the I.R. cap is the same as yours.
It has a "ring" if you will around the edge of the window that keeps the cap from seating flush o to the lens of the illuminator.
I simply took my Dremel tool with a cut off wheel and VERY CAREFULLY ground it flush with the rest of the cap.
Now it fits flush on the lens and almost no white light escapes .
You could also do this with a razor blade if you dont have a Dremel.
Hope this info helps.
Lou
Is there any possebility to re-code or otherwise make the illuminator not strobing? And also just the illuminator and not laser combined?
I got the exact same two, I'll be using the laser as a flashlight but it would be nice to be able to use the illuminator too...
I try to take an reply from FMA guy's since 3 week, no reply, really poor mentality :(
@@nicolas6226 I did the same, no answer, the laser works just fine but that illuminator is utter trash! Really shitty for something so expensive (airsoft wise) :(
So there is no constant setting for the FMA illuminator? Lame. Is it at least a laser diode and not an led?
Do you have a link for the brand new FMA LA5’s?
X X jkarmy.com has the black in stock currently
@@proxxy04 Which one is it? They have a couple of price points of FMA units. I see ones for 45, 72, and one for 225.
@@scootery they have many versions the uhp models are 450-500$ and are damn close to a real full
Power peq
was the nod footage with the vis lasers or ir lasers
Hi mate!
What happened with the PEQ? Ive watched the video by Wolvesrise and they ha e the same strobing issue with it. Any idea can be fixed?
The current version has the ability to change the IR illum, from different strobe rates to constant on.
Have you experienced any problems with adjusting windage on LA-5C? Because mine is way off to the right, so in the leftmost position the dot is still to the right of the BUIS.
On the other hand, the pressure switch on mine doesn't have the same contact problems as yours.
So far, it seems that build quality varies greatly, which isn't very good news, given the price... : (
So mine is off to the right of my ironsight at a distance of 25 feet, but it also depends on the distance of the zero, if you’re trying to have a zero of less than I’d say 50-75 feet that may be an issue, but as you have a further distance between you and the zero distance, it being turned full left maybe be off at say 25-30ft but it may close that gap at further distances.
Also, the way you’re supposed to zero anything like a scope or a laser is the L/R U/D it’s where you want the laser to go, it’s where you want your rounds to go. So if the round is left of where you’re aiming with the optic or laser, you adjust the turrets toward the R on the turret. So even though the laser is in the furthest left position of movement, when you shoot, the POI is gonna be to the right of the POA
Where did you buy that fma?
Link for sale?
is it can waterproof? sorry worst english
Which gP DBAL is that?
Solscud it’s the regular black G&P dbal. The one that retails for like 150-170 or something g like that
Major problem (sadely) : Color of aluminium parts, shapes of the battery cover (better on old FMA), covers for laser and illuminator, and this F****G ugly serial !!!
And WHY A STROB ??? :(
meh i know its not the right color, but I'm one to care more about the way it works vs the way it looks.
@@proxxy04 True, but for me the illuminator have a real problem ...
Nicolas yeah for most people it’s a problem, I’m indifferent about it, although I wish they did make an illuminator only setting because I could see a use for the strobing. I typically just use my IR flashlight setting for illumination
@@proxxy04 Same, I have an Surefire M300V ... But for the price ... And above all, they never talked about a strobe, even in the manual.
For me, look like an technical problem ... Laser with this power witouth an management card have this symptom ... And that often gives a very short life to the components of the same cicruit, so both lasers ...
Nicolas yeah I was gonna email them and see if it’s just a faulty unit, or what.
Hi mate , does it zero well and does it hold the zero ?
Odin Milsim so it has an issue with the adjustments we here even the laser being full left it’s still very off set to the right. But I fixed that by taking it apart and filed down the brackets inside so that when the knob is turned full left it actually is able to go to the left of center
@@proxxy04 thanks mate, sounds like a lot of work, for the money you would expect that they could have sorted that issue as well as the strobe problem. I do want a PEQ as I have 2 G&P dbals that work great, just they look a bit shit lol
@proxxy04 is there any chance you can make an instruction or share some pictures of the parts need filed dowm? thank you.
Idler Fang yeah but I’m busy now so idk when I’ll be able to get around to it, but I have thought about doing that in the past
@@proxxy04 Thanks, it's already great to know that it is repairable since customer service told me the opposite 😆. I looked into it today and removing the potting glue reveals the hex screws beneath it. May I know if we need just to removed the three screws on the back (with the mounting plate) or have to remove the screws in the front as well?
do you want to sale a peq? I'm interested