Nice job showing how it’s done. Like you said ones you’ve done a bunch it’s easy. I assemble the arm on my cart, then just mark out one hole for the body and the one for the shoe, hold up the body then giver with the self tapping screws. I’m a carpenter also, doing high rise at the moment
Hi Suzanne. Yes, It will be more controlled with a door closer on the door. It will allow the door to be controlled hydraulically and help prevent the wind from slamming the door. There are some limitations, as a strong wind can still grab the door and prevent it from closing in certain conditions. Would also recommend a door stop when using a door closer to prevent the door from opening too far if grabbed by the wind and damaging both the door and door closer.
hold on, @2:07 you just marked 9 1/8" not 9 1/16" . unless you held the hook end of your tape at 1/16". I thought i was imagining it but i went back and froze the video.
Exterior door opening in the building wood frame out if 2x8 the door us in its own frame steel the framing of 2x8 is 6in inside to mount top of closer it hits the should I mount closer on outside the so closer doesn't hit door
Olá Boa tarde assisti seu vidro sobre instalação de mola aérea e gostaria de saber se pode instalar o contrário. A mola no alisar e o bracinho da mola na porta
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Very detailed and on the dot ,best I've seen ..
Absolutely the best tutorial on the RUclips . Thank you .
Nice job showing how it’s done.
Like you said ones you’ve done a bunch it’s easy.
I assemble the arm on my cart, then just mark out one hole for the body and the one for the shoe, hold up the body then giver with the self tapping screws. I’m a carpenter also, doing high rise at the moment
هل البراغي العاديه تثبت في الباب الحديد وما تنسحب مع الوقت والا فيه براغي خاصه للحديد . يعني ينفع نستعمل نفس براغي الجدار مع الباب الحديد ؟؟
great video, been looking at these all day for the way for me and this is the best, thanks :)
Very nice video. If I get the arm extension kit, do the installation/drilling dimensions stay the same?
Thank you very much. You will be amazed at how much help you were .....
Is it possible to top jamb mount but in a pull side ?
Is it the same for doors opening to the left?
Have a question will the door closer help it to not slam because of the wind
Hi Suzanne. Yes, It will be more controlled with a door closer on the door. It will allow the door to be controlled hydraulically and help prevent the wind from slamming the door. There are some limitations, as a strong wind can still grab the door and prevent it from closing in certain conditions. Would also recommend a door stop when using a door closer to prevent the door from opening too far if grabbed by the wind and damaging both the door and door closer.
@@designhardware or a wind chain
Just use the closer as a guide for the holes no need for all that measuring you only need one measurement
Yes am agree big time
hold on, @2:07 you just marked 9 1/8" not 9 1/16" . unless you held the hook end of your tape at 1/16". I thought i was imagining it but i went back and froze the video.
never seen anyone mount the body of the closer on the frame before. Usually it's mounted on the door.
This is the best. Like a pro. Tranks! 😉
How do you makr adjustment for power?? Clockwise is stronger??
Great job.
well done ,this helps greatly thanks
Hey I love your tape measurement 🙌🏿
Good how to.well explained..
thanx for this lovely vedio I did it but the door is so hard to open
Why dyamej door dorty woork
your the man
-Can you top jamb mount a pull door? Can't figure it out...-
Can you perform a top jamb mount on the pull side of a door? Can't figure it out...
Exterior door opening in the building wood frame out if 2x8 the door us in its own frame steel the framing of 2x8 is 6in inside to mount top of closer it hits the should I mount closer on outside the so closer doesn't hit door
Hey
Nice job bro
heavy ol’drill those days
How to install a door closer
ruclips.net/video/xm3_5bMjMmM/видео.html
Obviously using the wrong screw head for the screws using to fix the closer. Yanks dunno Wah they're doing
Olá Boa tarde assisti seu vidro sobre instalação de mola aérea e gostaria de saber se pode instalar o contrário.
A mola no alisar e o bracinho da mola na porta
Nice demo, but must change language if in Hindi is better to understand.