I'm just now getting my banshee back up and running after sitting for 9 years. I rebuilt the top end and she started up perfect and would idle to my surprise. love the videos, keep it up
Banshee's are bad ass with any exhaust, that sounds great I have Toomey pipes, Banshee's even have a very distinct sound with Yamaha pipes, especially on the top end. Nothing like a Banshee, yours is a perfect example.
Love your channel man! I binge watched your Banshee build this AM before work, I couldn't stop watching lol. Bike came out sick. Definitely looking forward to more builds!
Ohhhhh ok. Never knew that. To me they sound like a very very angry dog barking, lol and i love it. Your welcome definitely one of the cleanest banshees out there.
I was gonna buy a new set of DMC Aliens, but I scored a beautiful set of FMF's for 250 bucks. Just hate how long the silencers are. Nothing I've heard sounds as good as the DMC's but I couldn't pass up the FMF's for that price
Thanks so much man! I didn't do anything fancy with the lights; just put wire connectors on the LEDs and plugged them into the wire harness. I did not do the DC conversion.
Whats up Nolan. This tank I ran 40:1 mix with Sunoco 100 octane gas. My plugs are NGK BR8ES. I used Quicksilver oil in my fuel but I am going to switch to another brand.
I hear really good things about amsoil dominator; I may try that next. If you have any Sunocos around you, they sometimes have one pump with 100 octane.
If u have any small private air ports they sell 100 octane have to cant be any lower octane but most will sell it to u just cant pump it straight into your gas tank has to be in a can atleast in wv it does.
I was runnin knock offs Had to drill out air bleed emulsion tubes to 1.2 mm but in the end the slides were sloppy on one and not the other ended with 35 pwk Also found to keep bottom end carburation needed an airbox (Without the lid) and with a few hole in the rear Also i run hi flow toomey foam filter with a womens hose as outawears flows as good as k@n but stops the fine dust that k@n cant stop But whatever works Good luck
Those things handle like crap when you stretch them out like that on the sides they don't turn good.. Anytime you get an extended axle you always need to make the front wheels one inch wider on both sides otherwise when you turn in freistadt jackknifed itself it turns like shit
I'm just now getting my banshee back up and running after sitting for 9 years. I rebuilt the top end and she started up perfect and would idle to my surprise. love the videos, keep it up
Thanks man! That's awesome, I love bringing things back to life! Good luck with your project!
Banshee's are bad ass with any exhaust, that sounds great I have Toomey pipes, Banshee's even have a very distinct sound with Yamaha pipes, especially on the top end. Nothing like a Banshee, yours is a perfect example.
This sounds awesome man! Almost like an old GP bike.
Wow! reminds me of when I had my Banshee... Great Job!
Thank you man!
Literally a death machine.🔥
Love your channel man! I binge watched your Banshee build this AM before work, I couldn't stop watching lol. Bike came out sick. Definitely looking forward to more builds!
Nice can't wait to see that shee on the trails
Thanks man. Soon. riding trip not this weekend but the following.
Ooo i can smell that 2 stroke from here man
Stunning Banshee 😎
Thanks so much 🤘👊
That thing is a sick monster
that is a very cool quad
Best sound ever!
Nice yard!
Sounds amazing. My banshee had the same setup. Ever thought of putting the t5 setup on it?
Yes I have! I love the sound of toomeys. I'd probably go T6 though because they're supposed to be better for stock bore. Thanks man!
Ohhhhh ok. Never knew that. To me they sound like a very very angry dog barking, lol and i love it. Your welcome definitely one of the cleanest banshees out there.
I have 2 banshees one has t5 and the other has t6 and I personally think the t5s sound better
This is so satisfying
Fat banshee,love your fluro yellow highlight's, specially the matching fuel lines,nice touch brother looks hell against the blue.Very trick 👍
Sweet ride man
I was gonna buy a new set of DMC Aliens, but I scored a beautiful set of FMF's for 250 bucks. Just hate how long the silencers are. Nothing I've heard sounds as good as the DMC's but I couldn't pass up the FMF's for that price
I do the the DMC's. My silencers are chopped almost to half the length.
Michael Sabo yours look perfect. Gonna cut mine like that when they get here
I wish my banshee looked this beautiful 😢
i wish for a motorcycle or atv
Did you cut the silencers yourself or were they already like that when you bought them?
They were already chopped. I've chopped other silencers though, it's pretty easy and straight forward to do. Just need a vise and a hacksaw.
Awesome 👌
What size pilots and main jets for this type of setup but on 93octane? Same mods as you, stock bore, fmf fatty and pod filters
My banshee sounds the exact same but they say mine sounds like shit
Haters gonna hate keep up bro💯
Gave it the mean mug on the first kick lol
Garage queen . Like mine
They all have the crank/rods knock sound at idle .hard to tell when they do go..
I have the exact same setup as you how did u get yours to be so loud?
How did you choose to wire the lights?
Good looking and amazing sound!
Thanks so much man! I didn't do anything fancy with the lights; just put wire connectors on the LEDs and plugged them into the wire harness. I did not do the DC conversion.
Are those not POWERCORE 2 shorty's?
Where’d you get those graphics man?
Graphics came from FMF directly.
What's the ratio of your gas and oil mix? What kind of octane do you get, and what kind of spark plugs do you run?
Whats up Nolan. This tank I ran 40:1 mix with Sunoco 100 octane gas. My plugs are NGK BR8ES. I used Quicksilver oil in my fuel but I am going to switch to another brand.
ok thanks I run my tank 24:1 with 93 octane wish I could get 100 and I use amsoil dominator.
I hear really good things about amsoil dominator; I may try that next. If you have any Sunocos around you, they sometimes have one pump with 100 octane.
If u have any small private air ports they sell 100 octane have to cant be any lower octane but most will sell it to u just cant pump it straight into your gas tank has to be in a can atleast in wv it does.
That's really interesting; I never even thought to check airports, but it makes a lot of sense. Thanks man!
“Here I come I get wicked”
just got a banshee
What jetting are u using on your Fmf
Why is the left exhaust more smoke than the right one?
I was wondering how ur lights are holding up the way that u wired them? Without doing the DC conversion
Mine still work fine, I know others guys are having trouble with the blowing out though.
Will they sound the same not cut
No, turbine core is much quieter and more restrictive uncut.
Thank you
Lots of dads here
Se escucha como un blaster
nice
Thanks man!
Clean machine
Thank you!
Just subscribed. I love your content man! Keep up the good work. That banshee is sex. Check out some of my vids if you're just chillin.
Thank you for subscribing man! I'll check out your channel!
Mmmm can even smell it
😍
and what kind of oil do you use?
This tank had quicksilver 2 stroke oil but I'm going to be switching to something else; it works just fine but I think I can find something better!
What price would she cost
top...
How much?! I want to buy it
Sorry man, not for sale!
GOOD
En cuanto sale y donde están ubicado
Lo están vendiendo
I would daily this thing if it were street legal
I think my cr500 will take it
is it for sale ?
No, shee's alllll mine :) haha
No independent rear suspension
what size jets are you running
I can't remember what I was running when I made this video, but I run 320 mains as of now in the stock Mikuni 26mm.
My wolverine 350 sounds like a Suzuki is that normal lol
Is music in 2020
Seems to be unsynked a little
Right pipe smokin more
1mm slide differance will do it
Russell Hall I actually address that in my next video. Seems like no matter what I do, those carbs never work right. They're cheap eBay knock offs.
I was runnin knock offs
Had to drill out air bleed emulsion tubes to 1.2 mm but in the end the slides were sloppy on one and not the other ended with 35 pwk
Also found to keep bottom end carburation needed an airbox
(Without the lid) and with a few hole in the rear
Also i run hi flow toomey foam filter with a womens hose as outawears flows as good as k@n but stops the fine dust that k@n cant stop
But whatever works
Good luck
This is awesome info man; I will definitely take this into account. For sure I am losing these crap carbs though!
Jersey?
PA! Philly area
Rip the yard up already
I bet the neighbors are angry
Those things handle like crap when you stretch them out like that on the sides they don't turn good..
Anytime you get an extended axle you always need to make the front wheels one inch wider on both sides otherwise when you turn in freistadt jackknifed itself it turns like shit
Q ai
Weak asf dude