I bought one of these second hand and I absolutely love it. People saying the rip fence isn't sufficient are clearly talking about the wrong product as it locks front and back which is perfect. Great review.
Sometimes you need to tune the fence so it squares up nicely. There's a bolt to adjust but most people don't do it and they get out of square cuts (which is frustrating for sure).
*Just completed a big trim project on my house **MyBest.Tools** Performed very well. Also appreciate how easy it is to move, set up and store with the integrated stand. No more cutting wood on my knees.*
Hi great review - thanks. Just a word of warning about the stainless steel screws that you fitted, stainless steel and aluminium tend to form a rather aggressive galvanic corrosion coupling with the aluminium losing the fight. Passivated stainless steel is even worse, the reason Makita used those blackened screws was to form a dielectric barrier between the screw material and the aluminium substrate to protect against galvanic corrosion.
You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice ruclips.net/user/postUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.
The makita LF1000 is also a good buy for house use or construction sites is also a good buy, because it can be operated as table saw and miter saw. However, I don't recommend it for use in a carpentry workshop as abasic tool, because its table is too small for some applications
What is the point of the black screws at 4:00 ? Also, another point is that making a zero clearance throat plate is extremely difficult for the makita table saws. I dont know why they made that design choice. All the other brands seem to have the traditional style of throat plate.
thank you for the review I just came across an ad for a used one and consider buying it. I am not a professional but I aim to improve my accuracy (I worked with a circular saw until now) I did not understand what you said about the issue with the mitre gauge, can you explain it briefly? Cheers
I'll take a look if I can make something for you :) I can already tell you there are a couple of screws (hex) at the black part of the handle (the part you push down to lock the rip fence).
Thank you. I currently have the extension table and the holding rails removed. Looks like each front and rear holding rail can be adjusted with 4 screws once the extension table has been removed. Hopefully this resolves the issue.
I've seen several comments about the screws, I'd not be surprised if they're JIS and not Phillips. Using a Phillips bit in a JIS screw will always end badly
Nice short and on point review just the basic thanks, here in Bolivia South America price it's over 1000$ or just that, how much did it cost you if you don't mind share, and also would like to ask, look it's pretty quite what do you think , thanks again
Hi. I'm planning to buy a bench saw, but still didn't decided yet between Makita 2704 and Bosch GTS 10 XC. What can you tell me about the T-tracks? Are they standard ones? I saw that on Bosch are not, and also both of them not same width. So if you want to use different add-on's....quite difficult. Thanks for your reply.
Hey MrSavage. I don't know what the standard is where you live ;) On the Makita the tracks are the same on both sides of the blade. The track itself is 18-19 mm or 3/4 inch wide (didn't have my calipers). I know a 18mm sheet fits just right on its side :)
Hi, I have a question for you, I have this table saw and I have built also the cross cut sled. The problem is that when I turn the saw on, the blade moves a little bit to the side (like a vibration with every start, like a wobble) and it always cuts into sleds groove for the cut and it destroys it (if I turn the saw when the sled is on it). Do you have the same problem or does your saw start smoothly? I am thinking of having it replaced because of this. I hope I am clear. Thank you very much for your answer.
Hi Jan! I have worked with a couple different brands of table saws and all of them have some sort of a wobble until the blade is up to speed. It is normal physics because the blade is sitting on the side of the motor. When the axial forces are high enough, the blade is stable. If you look at motor bike races and the driver falls of. Sometimes the motor continues on its own because of the wheels stabilizing. You normally don't notice the wobble until you use a sled and it bites away parts of it. I always tend to start the blade outside of the sled and then bring it in when the blade is up to speed. That's the only way to go. Sometimes, it also depends on the type and quality of blade you use but for your machine. If they have been stored flat with weights on them, they can be a little crooked. If it is really differing more then 1mm side to side, get it back.
I have my doubts since the motor does not use bronze bushings, it has plastic gears. Bosch GTS 10 XC and Metabo TS254 use metal in their gears and bearings in the motor.
Well I think the Dewalt is lighter and more easy to transport. The system to change the fence distance is more easy. The Makita is a little bit cheaper and has a bigger table surface. It is as precise as the Dewalt but I can't seem to trust the little marker that tells me the distance to the blade. I need to take out my tape measure to set it exactly right. I have no idea how easy to use the Dewalt is but I think their system is faster to set the fence just right. In the long run, they are both good saws. I hapened to like the bigger work surface of the Makita but if you are a contractor, I think the Dewalt is more interesting for you.
@@r3inhout thankx a lot...the issue that thé dewalt still.not avaible in My country algeria ...makita mlt 2704 yes...i will use IT for diy huby ...thankx chef
I say the fence is really good. It locks square to the fence..The crosscut thing is not as precise (it's a bit loose in the slot) but I prefer a crosscut jig or a mitre saw for that purpose.
I bought one of these second hand and I absolutely love it. People saying the rip fence isn't sufficient are clearly talking about the wrong product as it locks front and back which is perfect. Great review.
Sometimes you need to tune the fence so it squares up nicely. There's a bolt to adjust but most people don't do it and they get out of square cuts (which is frustrating for sure).
Yea probably talking about the previous model where the fence only clamps to the front
*Just completed a big trim project on my house **MyBest.Tools** Performed very well. Also appreciate how easy it is to move, set up and store with the integrated stand. No more cutting wood on my knees.*
Hi great review - thanks. Just a word of warning about the stainless steel screws that you fitted, stainless steel and aluminium tend to form a rather aggressive galvanic corrosion coupling with the aluminium losing the fight. Passivated stainless steel is even worse, the reason Makita used those blackened screws was to form a dielectric barrier between the screw material and the aluminium substrate to protect against galvanic corrosion.
You win the prize for the best comment! I didn't know any of this. Thanks for your insight :)
@@makedo3332 I can confirm this claim. This galvanic corrosion is annoying as you likely won't see it, but it can almost "weld" your screws in place.
would there be any kind of treatment you could apply to the stainless steel screws to prevent this ?
You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice ruclips.net/user/postUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.
EXCELLENT! A CLEAR DETAILED PRESENTATION PROVIDING A USEFUL INSIGHT TO THE EQUIPMENT. THANK-YOU!
One of the best reviews on this saw! Good job!
The makita LF1000 is also a good buy for house use or construction sites is also a good buy, because it can be operated as table saw and miter saw. However, I don't recommend it for use in a carpentry workshop as abasic tool, because its table is too small for some applications
I sold those for year's... Can't go wrong with anything made by Makita.
What is the point of the black screws at 4:00 ? Also, another point is that making a zero clearance throat plate is extremely difficult for the makita table saws. I dont know why they made that design choice. All the other brands seem to have the traditional style of throat plate.
Great review and nice to hear your observations. Could you advise /comment on the accuracy of the fence please? Enjoyed the video.
thank you for the review
I just came across an ad for a used one and consider buying it.
I am not a professional but I aim to improve my accuracy (I worked with a circular saw until now)
I did not understand what you said about the issue with the mitre gauge, can you explain it briefly?
Cheers
@1:25. What is that "add on" bracket you bolted to the rip fence?
The review is awesome. Can you show how you can tune and adjust the rip fence?
I'll take a look if I can make something for you :) I can already tell you there are a couple of screws (hex) at the black part of the handle (the part you push down to lock the rip fence).
Makedo thank you very much Makedo 👍
Thank you for the video. I have recently brought this table saw. Does your right extension table sit lower than the main table? Many thanks.
It does tend to hang down just a fraction. It's the only thing I hate..doing big 45° mitres is not that precise because of it :(
Thank you. I currently have the extension table and the holding rails removed. Looks like each front and rear holding rail can be adjusted with 4 screws once the extension table has been removed. Hopefully this resolves the issue.
the best table saw in the market
I've seen several comments about the screws, I'd not be surprised if they're JIS and not Phillips. Using a Phillips bit in a JIS screw will always end badly
Nice short and on point review just the basic thanks, here in Bolivia South America price it's over 1000$ or just that, how much did it cost you if you don't mind share, and also would like to ask, look it's pretty quite what do you think , thanks again
Hii is there feature soft start in this saw same like bosch table saw. Thanks
And which one is the best this makita or bosch 10 j
Hi. I'm planning to buy a bench saw, but still didn't decided yet between Makita 2704 and Bosch GTS 10 XC. What can you tell me about the T-tracks? Are they standard ones? I saw that on Bosch are not, and also both of them not same width. So if you want to use different add-on's....quite difficult. Thanks for your reply.
Hey MrSavage. I don't know what the standard is where you live ;) On the Makita the tracks are the same on both sides of the blade. The track itself is 18-19 mm or 3/4 inch wide (didn't have my calipers). I know a 18mm sheet fits just right on its side :)
Makedo thanks. Standard is also where I live 3/4” :) Would you buy it again the 2704, or would you go something else?
Hi. Do you think this table saw is capable of rip cutting oak logs 9 cm thick?
I don't think it's strong enough..but I don't think there's a jobside saw on the market that will take 9cm thick oak..
Can it take dado blades?
Hey Daniel! I have no idea. Dado blades are not allowed in the EU :(
Hi, I have a question for you, I have this table saw and I have built also the cross cut sled. The problem is that when I turn the saw on, the blade moves a little bit to the side (like a vibration with every start, like a wobble) and it always cuts into sleds groove for the cut and it destroys it (if I turn the saw when the sled is on it). Do you have the same problem or does your saw start smoothly? I am thinking of having it replaced because of this. I hope I am clear. Thank you very much for your answer.
Hi Jan! I have worked with a couple different brands of table saws and all of them have some sort of a wobble until the blade is up to speed. It is normal physics because the blade is sitting on the side of the motor. When the axial forces are high enough, the blade is stable. If you look at motor bike races and the driver falls of. Sometimes the motor continues on its own because of the wheels stabilizing. You normally don't notice the wobble until you use a sled and it bites away parts of it. I always tend to start the blade outside of the sled and then bring it in when the blade is up to speed. That's the only way to go. Sometimes, it also depends on the type and quality of blade you use but for your machine. If they have been stored flat with weights on them, they can be a little crooked. If it is really differing more then 1mm side to side, get it back.
I have my doubts since the motor does not use bronze bushings, it has plastic gears.
Bosch GTS 10 XC and Metabo TS254 use metal in their gears and bearings in the motor.
Am confuse between dewalt dw745 and makita mot 2704 .which one to buy? Please to help and advise!?
Well I think the Dewalt is lighter and more easy to transport. The system to change the fence distance is more easy. The Makita is a little bit cheaper and has a bigger table surface. It is as precise as the Dewalt but I can't seem to trust the little marker that tells me the distance to the blade. I need to take out my tape measure to set it exactly right. I have no idea how easy to use the Dewalt is but I think their system is faster to set the fence just right. In the long run, they are both good saws. I hapened to like the bigger work surface of the Makita but if you are a contractor, I think the Dewalt is more interesting for you.
@@r3inhout thankx a lot...the issue that thé dewalt still.not avaible in My country algeria ...makita mlt 2704 yes...i will use IT for diy huby ...thankx chef
Good review
Some people say the fence is of very low quality (sh*t). What do you say?
I say the fence is really good. It locks square to the fence..The crosscut thing is not as precise (it's a bit loose in the slot) but I prefer a crosscut jig or a mitre saw for that purpose.
Thanks a lot for your review!
Please can show makita table saw 2704 wiring diagram
has anyone tried a 270mm blade on this? it should, just not sure as its specifies a 260mm
To the point. Good job 👍🏼
can it use dado stack ?
Nature King I can't get my hands on a dado stack here in Europe so I don't know..
ok thanks though, *good review by the way*
www.toolstop.co.uk/makita-2704-table-saw-10-inch-255mm-240v-p1435 (yes, up to 13/16")
❤MAKITA❤
Watch my finger ...👍🏻
Is this saw made in China ?
Everything is made in China nowadays?
@@makedo3332 Could you see on the label on the saw ?
@@slaapkopjakke I'm out of town for work now but I'll check it this weekend :) Just out of interest: Do you avoid made in China products?
@@makedo3332 Sometimes yes, not always
it's me or you put the blade on the wrong direction
its you
maybe you should have use jis screwdriver...
This review makes me hate my makita mk100 table saw
i almost bought that makita mk100. I saw a few reviews about mk 100 and they weren't too good, so didn't buy them.
Bueno, continuamos sacando el mayor provecho a la sierra de banco makita, espero les guste ruclips.net/video/bWhuGthTzNc/видео.html
この乗ってる台がほしい！
Réparation interrupteur sci à table
TV vhyko