This is probably my favorite kit so far. Just got it on the 12th and it’s definitely the most fun I’ve had building a kit. Yours looks much better than mine though.
Does building MG require glue and some specific tools?, bcs i don't have a proper tool for gunpla, i already built few HG version only using bare hands and a scissor😅,, I'm planning to get my first MG build tho
@@faridcostanza4706 it doesn't require anything special at all. I'd definitely recommend getting some nippers at least. I used copper wire cutters for the longest time and those served me just fine, so you don't need any special kind of nippers. I'd also really recommend some kind of knife to clean the nub marks, but nippers are definitely higher priority than anything else. Still, those are the same tools you'd need for any kit, and it'll still build just fine even if you don't meticulously clean every single part before you assemble.
I really love you builds! Very simple and so neat! Couple of questions though... 1. How much time you wait for the panel liner to dry before you clean with the thinner? 2. How do you decide when to use dry transfer and water slide decal? 3. Are you using only water in your water slides? I mean, i saw many people use like mr mark setter and softer, do you use them as well? 4. How much time you dry the clear green pain in the eye before you apply the black paint? And what thinner you use in removing the extra black paint in the eye? 5. In your next video, can you please include a small clip how you spray the parts with the clear matte top coat? Sorry for asking these much. I am new to this hobby and I just want to learn your builds. Keep the videos coming! More power to your channel!
1. It will dry very quick but mostly i wait 40-60mins 2. This kit came with some dry transfer decals and some many clear stickers. I dont like clear sticker so, I bought extra water slide decals which have almost same pattern with both given dry transfer and clear sticker. Dry transfer is better than water slide in term of result but it is more difficult to apply. So, I used some big dry transfer decals which easier to apply and used water slide decals for the rest. 3. I have both setter and softer. But I dont see much differences so, i dont use them. 4. It depends on how thick you paint. Mostly i wait at least over night. Clear green is acrylic paint. Black is enamel paint so, use enamel thinner. 5. I just got spray booth so, probably next video or after next video. No worries man. I willing to share my experience
From my experience, most cracks happened when the paint stuck in seam line rather than panel line. When the paint stuck in seam line, it takes longer time to dry which means more time to erode plastic. It could happen when you do panel line after assemble. It is better to do panel line before assemble for some parts. if you are not sure, just do panel line on each part first then assemble later
Does building MG require glue and some specific tools?, bcs i don't have a proper tool for gunpla, i already built few HG version only using bare hands and a scissor😅,, I'm planning to get my first MG build tho
Hi! Question - do you apply tamiya panel liner directly to the bare plastic? Or do you top coat with a gloss coat then panel line? Just curious if you had any issues with the plastic cracking from direct panel line ink. Thank you!
just direct to bare plastic. From my experience, most cracks happened when the paint stuck in seam line rather than panel line. When the paint stuck in seam line, it takes longer time to dry which means more time to erode plastic. It could happen when you do panel line after assemble. It is better to do panel line before assemble for some parts. if you are not sure, just do panel line on each part first then assemble later
@@Armstudiogunplaspeedbuild Ahh I understand. So basically don't let the panel line "pool" or accumulate into the parts. I might try that then and panel line some of the parts individually. Thank you for the advice! Happy Building! :)
@@MrSuperalan99 It is possible but we can avoid that. From my experience, most cracks happened when ink stuck in seam line rather than panel line. When ink stuck in seam line, it takes longer time to dry which means more time to erode plastic. It could happen when you do panel line after assemble. It is better to do panel line before assemble for some parts. if you are not sure, just do panel line on each part first then assemble later
@@Armstudiogunplaspeedbuild nah I meant on my kit, the back skirting armor didn't want to fit onto the waist unit but i figured it out. I don't know if it's only a problem from my box or for the old prints of the mg duel but basically, inside the piece, there was something blocking me from snapping the piece onto the waist unit so i basically had to trim it with an x acto knife. That was very odd
Does building MG require glue and some specific tools?, bcs i don't have a proper tool for gunpla, i already built few HG version only using bare hands and a scissor😅,, I'm planning to get my first MG build tho
@@Armstudiogunplaspeedbuild thank you for your reply . I just had a idea . I will create my own water slide decals for all of my Gundam . I can do that , although it's take a lot of time . In my country , it's have all of the thing to create Water Slide Decal , why don't i think to about create the Decal Slide Water sooner 😙😙
Hello there, first of all what a great buildings I already whatched all of them, one question what kind of water decals are you using ? You search for a generic water decals ?
Maybe its just the camera, but the _only_ thing that i dont think looks good (and everything else looks amazing) is painting the eyes. the foil sticker have this shine to them that catches the light and makes them pop imo. with the paint it gets hidden by shadow. just my opinion.
I understand it. There are pros and cons. Foil sticker looks good when it catches the light However, it is not that durable. especially, when stick it on small and uneven surface like the eyes. If it peel off, it will be hard to put it back. So I choose to paint it. Painting with clear color won't make the eyes pop unless when the light go through backside camera just like mg wing kits. For these mg seed, it doesn't. So, I could paint backside of the eyes with white color. It would help a bit. Another option would be just paint solid color but they give a clear part for the eyes, why don't we paint clear color?
the omni AND zaft decals on duel just hurts my ocd. i had these kits as non-stolen (aegis, strike, buster, blitz), and then the justice, providence and freedom as zaft kits. Joule is definitely zaft. decals and their meaning matters a lot. great vid otherwise.
![#newtype #Otakubuilder #Gundamseed 1/100 Duel Gundam Assault Shroud [4K]](http://i.ytimg.com/vi/RY8-pbkB3nw/mqdefault.jpg)
Its amazing how simple panel lining, proper decal usage, and cleaning can make a gunpla look so damn clean and good.
I literally just got this kit today and can’t wait to build it!!!
This is probably my favorite kit so far. Just got it on the 12th and it’s definitely the most fun I’ve had building a kit. Yours looks much better than mine though.
Does building MG require glue and some specific tools?, bcs i don't have a proper tool for gunpla, i already built few HG version only using bare hands and a scissor😅,, I'm planning to get my first MG build tho
@@faridcostanza4706 it doesn't require anything special at all. I'd definitely recommend getting some nippers at least. I used copper wire cutters for the longest time and those served me just fine, so you don't need any special kind of nippers. I'd also really recommend some kind of knife to clean the nub marks, but nippers are definitely higher priority than anything else. Still, those are the same tools you'd need for any kit, and it'll still build just fine even if you don't meticulously clean every single part before you assemble.
I really love you builds! Very simple and so neat!
Couple of questions though...
1. How much time you wait for the panel liner to dry before you clean with the thinner?
2. How do you decide when to use dry transfer and water slide decal?
3. Are you using only water in your water slides? I mean, i saw many people use like mr mark setter and softer, do you use them as well?
4. How much time you dry the clear green pain in the eye before you apply the black paint? And what thinner you use in removing the extra black paint in the eye?
5. In your next video, can you please include a small clip how you spray the parts with the clear matte top coat?
Sorry for asking these much. I am new to this hobby and I just want to learn your builds.
Keep the videos coming!
More power to your channel!
1. It will dry very quick but mostly i wait 40-60mins
2. This kit came with some dry transfer decals and some many clear stickers. I dont like clear sticker so, I bought extra water slide decals which have almost same pattern with both given dry transfer and clear sticker. Dry transfer is better than water slide in term of result but it is more difficult to apply. So, I used some big dry transfer decals which easier to apply and used water slide decals for the rest.
3. I have both setter and softer. But I dont see much differences so, i dont use them.
4. It depends on how thick you paint. Mostly i wait at least over night. Clear green is acrylic paint. Black is enamel paint so, use enamel thinner.
5. I just got spray booth so, probably next video or after next video.
No worries man. I willing to share my experience
@@Armstudiogunplaspeedbuild thanks for the reply! Really appreciate it! 🙏🏻
God bless you channel!
How did you use Tamiya panel line on bare ABS plastic without leaving any crack?
From my experience, most cracks happened when the paint stuck in seam line rather than panel line. When the paint stuck in seam line, it takes longer time to dry which means more time to erode plastic. It could happen when you do panel line after assemble. It is better to do panel line before assemble for some parts. if you are not sure, just do panel line on each part first then assemble later
I loved this kit. Was such a joy to build. I painted mine with Gundam Markers. Looks good. This was a nice video.
Thanks man
Does building MG require glue and some specific tools?, bcs i don't have a proper tool for gunpla, i already built few HG version only using bare hands and a scissor😅,, I'm planning to get my first MG build tho
What size of swabs do you use when cleaning the panel lines I might try it your way
I normally buy basic round ends with pointed ends.
ใช้ clear green ทาต้องผสมทินเนอร์เข้าไปด้วยไหมครับ หรือจุ่มแล้วทาได้เลยครับ
ทาได้เลย แต่ถ้าหนืดไปก็สักหยดก็ได้ครับ
seed/seed destiny series LETS GOOOOOOOOO!
Did you rescribe before panel lining?
I did it on the thigh armors.
Hi! Question - do you apply tamiya panel liner directly to the bare plastic? Or do you top coat with a gloss coat then panel line? Just curious if you had any issues with the plastic cracking from direct panel line ink. Thank you!
just direct to bare plastic. From my experience, most cracks happened when the paint stuck in seam line rather than panel line. When the paint stuck in seam line, it takes longer time to dry which means more time to erode plastic. It could happen when you do panel line after assemble. It is better to do panel line before assemble for some parts. if you are not sure, just do panel line on each part first then assemble later
@@Armstudiogunplaspeedbuild Ahh I understand. So basically don't let the panel line "pool" or accumulate into the parts. I might try that then and panel line some of the parts individually. Thank you for the advice! Happy Building! :)
Simple yet awesome!
are you using tamiya panel line on bare plastic? or did you topcoat beforehand
I use it on bare plastic.
@@Armstudiogunplaspeedbuild has your plastic ever cracked?
@@MrSuperalan99 It is possible but we can avoid that. From my experience, most cracks happened when ink stuck in seam line rather than panel line. When ink stuck in seam line, it takes longer time to dry which means more time to erode plastic. It could happen when you do panel line after assemble. It is better to do panel line before assemble for some parts. if you are not sure, just do panel line on each part first then assemble later
Super boulot on attendsd'autre vidéo
Did you just do the decals before applying top coat??
Yes
@@Armstudiogunplaspeedbuild did you put mark setter for water slide or not? Cuz i love your work
@@mijelventura3446 I rarely use mark setter. I only use it when decal doesnt stay well for example small decal that have to place on edge or curve.
I see thanks
It's not necessary to gloss coat bare plastic before doing decals, and matt coat always goes over decals to make them blend in better.
高達本身有沒有塗上任何油漆？還是只噴上TS-80?
just TS-80 and some small clear green parts
Can somebody tell me why the back of the waist armor somehow doesn't wanna fit in like in the video at 0:38 ?
Do you mean the sound?
@@Armstudiogunplaspeedbuild nah I meant on my kit, the back skirting armor didn't want to fit onto the waist unit but i figured it out. I don't know if it's only a problem from my box or for the old prints of the mg duel but basically, inside the piece, there was something blocking me from snapping the piece onto the waist unit so i basically had to trim it with an x acto knife. That was very odd
@@Sam-yb2ii mine no problem but front skirt
Hope you keep doing these. They're an absolute thrill to watch! Hope you go back to using music though.
Thanks for your recommendation man
Do you know how to fit in B5 because for some reason it's loose
That is normal. A10 and A11 are the parts which hold B5 in position
@Armstudio yeah I figured that out and Thanks for the help
@Armstudio another question how did you get the assault shroud waste because I can't seem to get it in
@@gamerskygun183 I tried many ways and ended up using thin double sided tape
@Armstudio I think imthis is my last question but are you suppose to snap in the the front leg shroud or let it be loose and snap in the other piece
Does building MG require glue and some specific tools?, bcs i don't have a proper tool for gunpla, i already built few HG version only using bare hands and a scissor😅,, I'm planning to get my first MG build tho
don't need glue. just get a proper nipper
Bro, you are not using mr mark setter in you water decals?
I feel like it is not necessary unless you wanna apply small decal on edge. Yes it is needed.
Hello very beautiful work can I ask how long you did it? Including breaks 😅
Normally 2 weeks if im not lazy.
@Armstudiogunplaspeedbuild Hi man follow up question, do you use thinner when you painted the eyes?
@@frederickvillena1830 Normally, i dont use. But if you feel like the paint is too thick, just add a drop of thinner.
Awesome work, quick question do you panel line onto bare plastic?
yes
Anyone know what water decals were used?
I used D.L model decals but I don't recommend. It is too thin and not accurate. I think better use artisan club or evolution studio.
@@Armstudiogunplaspeedbuildawesome thanks for the tip!
Can you tell me where you buy the Water Slide Decal for Assault Shroud ?
online from shopee
@@Armstudiogunplaspeedbuild which shop ? Please tell me
@@ruti_gacha3209 As far as i know, Shopee cant ship oversea. You better search a shop in your country bro.
@@Armstudiogunplaspeedbuild thank you for your reply . I just had a idea . I will create my own water slide decals for all of my Gundam . I can do that , although it's take a lot of time . In my country , it's have all of the thing to create Water Slide Decal , why don't i think to about create the Decal Slide Water sooner 😙😙
@@ruti_gacha3209 that sounds great
Your vids are so oddly satisfying! Question, how do you get rid of your nubs? Keep putting out great content. Looking forward to your next vid.
I use art knife to clean up nubs.
Awesome! :D
Hello there, first of all what a great buildings I already whatched all of them, one question what kind of water decals are you using ? You search for a generic water decals ?
Hi, I bought them online. Just search (gundam name) water slide decals.
Maybe its just the camera, but the _only_ thing that i dont think looks good (and everything else looks amazing) is painting the eyes. the foil sticker have this shine to them that catches the light and makes them pop imo. with the paint it gets hidden by shadow. just my opinion.
I understand it. There are pros and cons. Foil sticker looks good when it catches the light However, it is not that durable. especially, when stick it on small and uneven surface like the eyes. If it peel off, it will be hard to put it back. So I choose to paint it. Painting with clear color won't make the eyes pop unless when the light go through backside camera just like mg wing kits. For these mg seed, it doesn't. So, I could paint backside of the eyes with white color. It would help a bit. Another option would be just paint solid color but they give a clear part for the eyes, why don't we paint clear color?
No Buster Gundam build yet?
Coming soon
1:21 "Do Not Use on Decals and Stickers"... Immediately uses on decals lol
lol but that actually true on tamiya water slide decals.
the omni AND zaft decals on duel just hurts my ocd. i had these kits as non-stolen (aegis, strike, buster, blitz), and then the justice, providence and freedom as zaft kits. Joule is definitely zaft. decals and their meaning matters a lot. great vid otherwise.
panel line > top coat
or
top coat > panel line
panel line > top coat
Just got this one today