I just bought a Stihl 32 inch Light Bar a few days ago. Glad to here their the lightest Bar. Learn so much on this Channel. I'm going to stand up and Buck. Thanks for all the knowledge about PowerSaws Buckin.
I just rescued a power Mac 310 from the curb. The guy ignored me and just stared at me when I said hello and asked about the saw. I said I live around the corner neighbor, nice to meet you, and drove off with the saw. I need a carb kit for carb 94496 zama, an air cleaner cover and the plastic piece that sits on top of the air cleaner cover, that the choke lever goes through. All that left of that is a piece of broken plastic that says throttle latch on it. If I could get a carb kit I know I can save this old gal. Oh, my neighbor, he had the chain on backwards 😅
Amazon, Lil Red Barn are good places to start. Just start putting model numbers in the ole web and you'll be down the rabbit hole of parts before you know it! Good hunting!
I’ve done very well with curb finds over the years. Almost everything with a 2 cycle motor in my garage is something someone put out with the garbage. I have a stihl 024 AV super hanging on the wall waiting for a top end and piston. Everything else is fine.
@@americanlivesmatter-BmanWild no worries friend. I got it running today. I bought a donor saw on eBay, tore it apart and made a great saw. I just need a lock nut for the chain cover assembly. The oem nut on both saws backs off rapidly. I used buckins video on carb adjustment and she rips. I did not even have to rebuild the carb. One fuel line was thin, like a wet noodle and probably sucking itself shut. I'm guessing ethanol. What a sweet sound those old mac's make!
Thank you buckin! I’ve been watching your wisdom for months now and it’s great to see your acts of kindness and patients when passing on knowledge! I just cut firewood for the household but you have opened my eyes to a new passion of power saws! Thank you and good bless ya billy ray!
Awesome video Buckin! Let’s continue to evolve and spread the love! I pray for your continued healing, and am feeling joy to see you getting all your equipment and vehicles absolutely dialed in to get back to cutting! Love you man! Let’s finish our week strong and with patience and kindness friends!
Buckin’: I don’t have enough for this stuff… The walkers: It’s ok. Just pay us when you get back.” That’s stellar. Unbelievable. What’s the saying? Random acts of kindness and Senseless acts of Beauty…?
I have a Donny Walker mufler on my 261 with his dual pipe outlets. In fact a few years back you did a short vid with a walker 261. Another great episode sir.
That's a damn fine saw. I remember back at my job before retiring I worked on small engines,everything, I remember making chains and I had the same setup,I really miss working I tinker around my house with mowers weed eaters and chainsaws but it's just not the same. That husqvarna is a fine saw Buckin.
I run my Stihl 661Mag with a Stihl 36” lightweight bar it came stock with a 36” standard and I also have a Oregon 42” bar the weight between them all is just not comparable! I use them all but when it get into falling and running saw all day you find as Buckin said every way you can to benefit on being lighter! And the big part a lot of people over look and nothing on anyone but for us that are on the stump all day it has a lot to do with balance! With a heavier bar you get tip drop so when you are try to make your money cut you are fighting that weight all day to be straight and flat on your horizontal cuts when falling! With the light weight bar my saw is perfectly balanced when you pick it up by the rap! No drop at all it makes such a big difference you just can’t compare the two! And it is so much easier on your body! Great video Buckin glad to see you are doing better let her rip tater chip!🤟🏻👊🏻
It is nice to kick back and watch some of your videos, my friend. This snow has been absolutely crazy here in Northern California. Its been cuttin into my Buckin time... Haha get it, cutting into!! 🤣🤣 The dad jokes are gettin real. Grateful for the weather and water but its nice to get a break! Love ya Buckin, go on and get some! I am ready to cut but the ground is under 5 feet of frozen stuff! 🤣🤣
Thanks again Buckin for another great video!! Can't wait for the day to shake your hand. I have been selling firewood for 22 years now, love my saws, and the woods. Recently in the last year my best friend has started helping me and have partnered up. He started off not as crazy about powersaws as I am, but I turned him on to your channel, and everyday at work(we both work together at our full time job) we talk about and discuss your videos!!! He is all about chainsaws now and I love it!! We hope to chat with you in person one day, hopefully at a bunyon show, or buckinstock!! Thanks again brother!!
Hello. I am not a logger and also not a person with much knowledge about thoes issues. I just cut my personal firewood and help friends. I have a Stihl MSA300 with original Stihl 18" light 04 bar and chains, I not understand about all thoes size gages but my idea was to be able if possible to install kind same gage bar and chain on my old Husky 162 but in a 24" bar lenght. I very seldom use my old husky for I have went to battery power, so in my case now it with be to set up my old husky with a 24" bar just for any eventually ticker log. Do you have any advice about a 24" bar and chain size? Also what brand with be recommended to keep weight down on this my old husky witch in fact still in top performance even after so many years? Thanks in advance for your advice.
I learned how to file watching your videoes. At the beginning, I didn't get the sharpest chain with my hand file. So i took the raker down to .040"/ 1mm to get the saw to bite a bite more. Great chips, but the chain didn't like bore cutting. Or get a bit moody, especially in the hardwoods when i didnt reach all the way through the log. Then I started rewatching the videoes, and found out the 0.25" / 0,65mm depth again. And my oh my did that make a huge difference. When I start to borecut now, I hardly need to hold the saw. I just need to guide it a bit and swoop it goes into the log. Thanks for all the great tips, tricks and entertainment friend. Yall have a good one!
How long has walkers shop been around? I wonder if my old man bought his 066 from him between 94-97...He's gone now and I couldn't let that saw go. Just good memories of how happy he was running that saw falling on rodrick island, bella coola, bella bella in the 90's. He worked 20 on 10 off when I was growing up. He moved to Nanaimo from Newfoundland in 94 and we followed a year later. It was an amazing time and my dad fell in love with the west coast. He retired in Newfoundland shortly before he died. We had a connection through woodwork, axes, powersaws, and the outdoors...sorry for rambling lol watching your videos just really makes me reminisce and want to get back out there. Thanks for what you do man.
Hey Buckin about having your wood on the ground and using a tractor, well that's what we do mainly because it's all in the firewood yard. BUUUT for small stuff we recently bought a "Timber Croc" that will hold logs as heavy as you can lift into it at a nice height. So far I'd recommend one, if you didn't have a long bar it'd definitely save your back!
Howdy Mr. Bucken,great info for sure,I got a handful of them adapters but haven't used them yet,didn't know you would lengthen the stihl bar so it fits the
The Stihl bars are all steel but they are actually hollow. They are great with a few caveats, they usually don't bend until they snap. I love the light weight but have had one of them snap right in half. Also the 36" is quite flexy and will throw a chain in novice hands if even just slightly loose. When treated gingerly and handled properly they are the best. For a workhorse bar that will be run hard I prefer the sugihara light, in my experience it is totally bulletproof
Hello Buckin and Donny from Florida. The old boat racer ,250 cc . Cut slit and stacked about 3 or 4 chord of would with my old Macs and one ported husky. Thanks Donny for your help with that wrist pin tool idea for my right clutch side recoil 1010. Ported it to. Why not right? Take care y'all. It's about to get crazy
Best sounding mufflers you can put on a saw those original Walker mufflers, they look like they pull hard too! I’ve got one like that for my 281XP I’ve been wanting to try out but there ain’t no way I can start that saw right now. Like you I’m battling physical problems that hit me unexpectedly so I got to run the “easy to start” saws. We’ll heal up eventually.
Nice I like to do light bar on saw buying this year. It important to me to have 93 drive links like my other two saws. Nice running saw thanks for sharing.
Those Stihl light bars really do save the back. I run them on all my saws as well. If you haven’t ran one you definitely should. Don’t know what your missing.
Just bought my first professional saw this afternoon. A stihl 461r with a 32" bar. Now I just need to find some EXJ here on the prairies and get to work! Lol
Thank You Billy that u share yours knowledge, im study every Day yours video even those ones form couple years ago and getting so much very important things, U teach me how to really sharpen a chain how to really run saw to not burn it....and ofcourse to be good kind hard working person... Thank you ❤️🪓💪
What an Absolutely Awesome Video Buckin!! What I've learned from you I can't thank you enough!! I'm definitely looking forward to more of your knowledge!! Thank You!! I love all your videos but I'm glad you're able to cut again!! 👍🏻👍🏻
I have been a Husky man for years. Stihl has a so called rep for being the best saw but I think it is a lot of hype as I have never had issues other than normal wear and tear, etc. with Husky. The nick name truly fits the brand.
i bin cuttin' along time and have never herd that,, this rep you speak of . what i have seen is that there is ford guys and chevy guys and that they both are the best ,.. thx Stevie
Big difference for me is and this just my opinion… husky is all performance and stihl just lasts longer with the normal wear & tear side of things. Husky has the power & stihl has the durability for short!
@@mrtreejunkie Probably why I like Husky and little or no issues as I am not in the business and have dropped many a tree in my time but nothing like you guys. I continue to learn tips and tricks thru the vidoes of pros so thanks to all who continue to post
You are a down to earth guy i love you videos ,,,Donnie walkers saw shop is awesome but hear in ontario we are having a hard time finding the light bars..... keep on keeping on man ..
have you posted a video of the story of how you managed to get into old growth felling etc. I know you talked about it a bit in this video but it just sounds really interesting
I have a host of Stihl’s, a 372XP, and a few large Echos in my truck for work. They’re all set up to take modified lightweight Oregon & Tsumura bars with a Stihl mount. Getting everything set up to take the same bar & chain system is absolutely the way to go!
Hindsight I wish I would have had Donny do the 75cc mod to my 372 when I sent mine to him. I like it far better than I did when I first got my 372, but "More Power" right?! Thank you for the Stihl bar info also. Keep on Buckin'!
Buckin I have two cotton wood trees i need taken down. they are right over one of my out buildings. not good. i will trade you a 79 ford 350 camper special 4wd 4 speed, 30k on a rebuilt 400 big block new edlebrock carb seat redone. love your vids. oh ya im in west central idaho. I know you like fords. couldnt go to a nicer guy..be safe my friend.
Hey Buckin what kinda of chain did you have on the roll you made , I was just curious what your running. I would like to start making my own chain but not sure what’s a good brand. Is that exl ?
Buckin, give us an update on the Castrol go 2t. Can you still find it in your neck of the woods? What else have you been using besides stihl or husqvarna oil?
Billy I have a question, a while ago you showed cutting off the anti kick back rakers off of a chain, to make it a true full chisel chain. Did it work? More importantly did it help?
Another great video Buckin, Can you explain how to tell if a chain is destroyed? For example I was on a job and my saw was not cutting great so I stopped, filed my chain and on the first cut it lost it's edge. I did this a few times before just tossing it in the trash and buying a new chain.
@@BuckinBillyRaySmith What causes it to loose its edge on the first cut? Can the temper in the chain get ruined or would that more than likely be an issue with the filing itself?
I just bought a Stihl 32 inch Light Bar a few days ago. Glad to here their the lightest Bar. Learn so much on this Channel. I'm going to stand up and Buck. Thanks for all the knowledge about PowerSaws Buckin.
Buckin is just the best. Puts a smile on my face every time I get to hear his voice! ❤👍🏻🤙🏻😁
if yer smilin were winnin'
Buckin I'm looking forward to learning about power saw maintenance and stand up and buck . Thanks for the awesome videos .👍
consider it done , i will re cap it
Daily dose of Buckin and a bonus Bobby Walker!
Walker’s saw ‘s is a first class business and what they did for you when you started your business was a true axe of kindness ♥️👍
Hello Buckin! Good evening everyone!!! That flashback to Bunyan brought a smile to my face!
mee too
Intensify the gloriousness is officially the phrase of the year. Thank you, Buckin!
yeah buddy
I just rescued a power Mac 310 from the curb. The guy ignored me and just stared at me when I said hello and asked about the saw. I said I live around the corner neighbor, nice to meet you, and drove off with the saw. I need a carb kit for carb 94496 zama, an air cleaner cover and the plastic piece that sits on top of the air cleaner cover, that the choke lever goes through. All that left of that is a piece of broken plastic that says throttle latch on it. If I could get a carb kit I know I can save this old gal. Oh, my neighbor, he had the chain on backwards 😅
Amazon, Lil Red Barn are good places to start. Just start putting model numbers in the ole web and you'll be down the rabbit hole of parts before you know it! Good hunting!
@@americanlivesmatter-BmanWild no, not stolen. Your humor escapes me.
I’ve done very well with curb finds over the years. Almost everything with a 2 cycle motor in my garage is something someone put out with the garbage. I have a stihl 024 AV super hanging on the wall waiting for a top end and piston. Everything else is fine.
@@americanlivesmatter-BmanWild no worries friend. I got it running today. I bought a donor saw on eBay, tore it apart and made a great saw. I just need a lock nut for the chain cover assembly. The oem nut on both saws backs off rapidly. I used buckins video on carb adjustment and she rips. I did not even have to rebuild the carb. One fuel line was thin, like a wet noodle and probably sucking itself shut. I'm guessing ethanol. What a sweet sound those old mac's make!
@@americanlivesmatter-BmanWild 14" , 38cc and you say it has plenty of power. You must be pruning trees and trimming your bushes with it🤣
Thank you buckin! I’ve been watching your wisdom for months now and it’s great to see your acts of kindness and patients when passing on knowledge! I just cut firewood for the household but you have opened my eyes to a new passion of power saws! Thank you and good bless ya billy ray!
happy 4 u friend
@@BuckinBillyRaySmith Stihl bar is lighter than Sugahara bars ??
Awesome video Buckin! Let’s continue to evolve and spread the love! I pray for your continued healing, and am feeling joy to see you getting all your equipment and vehicles absolutely dialed in to get back to cutting! Love you man! Let’s finish our week strong and with patience and kindness friends!
Takes me back 30 years and my learning of the power saw and falling timber!
Billy, great touch on the drum intro... saw Neil Peart 5 times. Picked up a Husqvarna 450, 20" bar. Love the outdoors and our Earth.
Just another great video, thanks buddy. Love those kind of stories about your start
thx
Buckin’: I don’t have enough for this stuff…
The walkers: It’s ok. Just pay us when you get back.”
That’s stellar. Unbelievable.
What’s the saying? Random acts of kindness and Senseless acts of Beauty…?
I have a Donny Walker mufler on my 261 with his dual pipe outlets. In fact a few years back you did a short vid with a walker 261. Another great episode sir.
That's a damn fine saw. I remember back at my job before retiring I worked on small engines,everything, I remember making chains and I had the same setup,I really miss working I tinker around my house with mowers weed eaters and chainsaws but it's just not the same. That husqvarna is a fine saw Buckin.
I run my Stihl 661Mag with a Stihl 36” lightweight bar it came stock with a 36” standard and I also have a Oregon 42” bar the weight between them all is just not comparable! I use them all but when it get into falling and running saw all day you find as Buckin said every way you can to benefit on being lighter! And the big part a lot of people over look and nothing on anyone but for us that are on the stump all day it has a lot to do with balance! With a heavier bar you get tip drop so when you are try to make your money cut you are fighting that weight all day to be straight and flat on your horizontal cuts when falling! With the light weight bar my saw is perfectly balanced when you pick it up by the rap! No drop at all it makes such a big difference you just can’t compare the two! And it is so much easier on your body! Great video Buckin glad to see you are doing better let her rip tater chip!🤟🏻👊🏻
It is nice to kick back and watch some of your videos, my friend. This snow has been absolutely crazy here in Northern California. Its been cuttin into my Buckin time... Haha get it, cutting into!! 🤣🤣 The dad jokes are gettin real. Grateful for the weather and water but its nice to get a break!
Love ya Buckin, go on and get some!
I am ready to cut but the ground is under 5 feet of frozen stuff! 🤣🤣
Yikes... watching on the news, double yikes,
About to get tons of rain on top of that....
Triple yikes... best of skills to ya 🙏
Thanks again Buckin for another great video!! Can't wait for the day to shake your hand. I have been selling firewood for 22 years now, love my saws, and the woods. Recently in the last year my best friend has started helping me and have partnered up. He started off not as crazy about powersaws as I am, but I turned him on to your channel, and everyday at work(we both work together at our full time job) we talk about and discuss your videos!!! He is all about chainsaws now and I love it!! We hope to chat with you in person one day, hopefully at a bunyon show, or buckinstock!! Thanks again brother!!
great stuff brother
Being a retired Stihl tech and a firewood cutter, if your chain stalled in the wood, you ain't cutting. Love your channel & content! ❤
Hello.
I am not a logger and also not a person with much knowledge about thoes issues. I just cut my personal firewood and help friends.
I have a Stihl MSA300 with original Stihl 18" light 04 bar and chains, I not understand about all thoes size gages but my idea was to be able if possible to install kind same gage bar and chain on my old Husky 162 but in a 24" bar lenght.
I very seldom use my old husky for I have went to battery power, so in my case now it with be to set up my old husky with a 24" bar just for any eventually ticker log.
Do you have any advice about a 24" bar and chain size? Also what brand with be recommended to keep weight down on this my old husky witch in fact still in top performance even after so many years?
Thanks in advance for your advice.
You Buckin changed my lifestyle for good. You're right! Spread love and you'll earn love!
Thank you very much Sir!
Greets from Bavaria (Ger)
so happy yer here friend
Donny and the saw shop got me hooked up with a Walkerized 562 and Ive been ripping her good here in some East Coast wood! Love it
I learned how to file watching your videoes. At the beginning, I didn't get the sharpest chain with my hand file. So i took the raker down to .040"/ 1mm to get the saw to bite a bite more. Great chips, but the chain didn't like bore cutting. Or get a bit moody, especially in the hardwoods when i didnt reach all the way through the log. Then I started rewatching the videoes, and found out the 0.25" / 0,65mm depth again. And my oh my did that make a huge difference. When I start to borecut now, I hardly need to hold the saw. I just need to guide it a bit and swoop it goes into the log. Thanks for all the great tips, tricks and entertainment friend. Yall have a good one!
yeah
How long has walkers shop been around? I wonder if my old man bought his 066 from him between 94-97...He's gone now and I couldn't let that saw go. Just good memories of how happy he was running that saw falling on rodrick island, bella coola, bella bella in the 90's. He worked 20 on 10 off when I was growing up. He moved to Nanaimo from Newfoundland in 94 and we followed a year later. It was an amazing time and my dad fell in love with the west coast. He retired in Newfoundland shortly before he died. We had a connection through woodwork, axes, powersaws, and the outdoors...sorry for rambling lol watching your videos just really makes me reminisce and want to get back out there. Thanks for what you do man.
Great tips Buckin. You are a wealth of knowledge about power saws and tree work. Love ya brother.
Oh my that 75 is siiiiiiccccckkkkk. Love that. Thank you Buckin for the lift up. Love ya brother 🌲❤️🌲👊🪓
Hey Buckin about having your wood on the ground and using a tractor, well that's what we do mainly because it's all in the firewood yard. BUUUT for small stuff we recently bought a "Timber Croc" that will hold logs as heavy as you can lift into it at a nice height.
So far I'd recommend one, if you didn't have a long bar it'd definitely save your back!
Howdy Mr. Bucken,great info for sure,I got a handful of them adapters but haven't used them yet,didn't know you would lengthen the stihl bar so it fits the
The Stihl bars are all steel but they are actually hollow. They are great with a few caveats, they usually don't bend until they snap. I love the light weight but have had one of them snap right in half. Also the 36" is quite flexy and will throw a chain in novice hands if even just slightly loose. When treated gingerly and handled properly they are the best. For a workhorse bar that will be run hard I prefer the sugihara light, in my experience it is totally bulletproof
Hello Buckin and Donny from Florida. The old boat racer ,250 cc .
Cut slit and stacked about 3 or 4 chord of would with my old Macs and one ported husky.
Thanks Donny for your help with that wrist pin tool idea for my right clutch side recoil 1010. Ported it to. Why not right?
Take care y'all. It's about to get crazy
Ha ha ha WOOD. not Would 🤔
Love ya Buckin! About a third of my new climbing gear showed up today, as did the business phone, I'll be back in the tops soon!
Thank you for sharing this information, Buckin! I have a 372xpw, and I love that thing! I'm going to try this with a stihl light bar.
🤣 Last week when you posted this RipSaw sold out of 28's, now they're out of ALL Stihl lightweights!
Best sounding mufflers you can put on a saw those original Walker mufflers, they look like they pull hard too! I’ve got one like that for my 281XP I’ve been wanting to try out but there ain’t no way I can start that saw right now. Like you I’m battling physical problems that hit me unexpectedly so I got to run the “easy to start” saws. We’ll heal up eventually.
Nice I like to do light bar on saw buying this year. It important to me to have 93 drive links like my other two saws. Nice running saw thanks for sharing.
Those Stihl light bars really do save the back. I run them on all my saws as well. If you haven’t ran one you definitely should. Don’t know what your missing.
I love it when this man shows up💪
show up for life brother thx Red
Peace, love and powersaws! That Walkerized saw is fricken awesome, I'm sure you can hardly wait to put that machine to work. Be well everyone - peace
today it will be done
I have been spinning rivets for years! Love it buddy!
"Gloriousness"!
I am just going to keep saying that to myself all day!
Love you all...❤️❤️❤️
Lieutenant Bradley
good idea
I've been wondering why I haven't seen you run the mac 125's for a long time now. You do what you got to do to keep going.
Just bought my first professional saw this afternoon. A stihl 461r with a 32" bar. Now I just need to find some EXJ here on the prairies and get to work! Lol
good combo walkers,, or the link in descriptions ,, will set ya up , dont wait both are sellin like toast when it was new
Continuing prayers for your complete recovery my friend. 🙏♥️👍
Thank You Billy that u share yours knowledge, im study every Day yours video even those ones form couple years ago and getting so much very important things, U teach me how to really sharpen a chain how to really run saw to not burn it....and ofcourse to be good kind hard working person... Thank you ❤️🪓💪
very glad you are with us friend
Nice slices there BBR - have a great day!
Thank you Billy!
You're a good man.
My 372 husqvarna is 75CC And I love it
how are ya lyle
What an Absolutely Awesome Video Buckin!! What I've learned from you I can't thank you enough!! I'm definitely looking forward to more of your knowledge!! Thank You!! I love all your videos but I'm glad you're able to cut again!! 👍🏻👍🏻
I have been a Husky man for years. Stihl has a so called rep for being the best saw but I think it is a lot of hype as I have never had issues other than normal wear and tear, etc. with Husky. The nick name truly fits the brand.
i bin cuttin' along time and have never herd that,, this rep you speak of . what i have seen is that there is ford guys and chevy guys and that they both are the best ,.. thx Stevie
Big difference for me is and this just my opinion… husky is all performance and stihl just lasts longer with the normal wear & tear side of things. Husky has the power & stihl has the durability for short!
@@mrtreejunkie Probably why I like Husky and little or no issues as I am not in the business and have dropped many a tree in my time but nothing like you guys. I continue to learn tips and tricks thru the vidoes of pros so thanks to all who continue to post
Love is winning brother! That 372 is cherry, definitely couldn't pass on that one.
yip ,,,and nope .. lol
I run a stihl ms460 /32 , I never tan anything but stihl saws . I need to find me a husky 372 I recon . Thanks Buckin !!!
you bet... then you will atleast know . kool
You are a down to earth guy i love you videos ,,,Donnie walkers saw shop is awesome but hear in ontario we are having a hard time finding the light bars..... keep on keeping on man ..
Good afternoon Buckin!
howdy
Love your videos, good information and presentation, and we get all this thanks to your kindness.
Great video and thanks for sharing, lots to learn.
have you posted a video of the story of how you managed to get into old growth felling etc. I know you talked about it a bit in this video but it just sounds really interesting
i have an original 372xpw factory 75cc saw its a 2007 model best one i have owned
Love the knowledge thanks man
Got my buckin fix for the day lol
haha thx
Partner I have pushed my way through life, ready or not this get the job done! I will figure it out on the way!
Nice had to watch this one twice
Nice!!!!
Hello buckin! Much love brother 🤘🏻🇺🇸✊🏻 from ove on the east coast in central Massachusetts ❤❤love always wins!
indeed hot rod
Heck ues can't wait to hear a woodman secrets!!! Keep up the great work hope you fill better..
That Husky powerhead with the Sthil bar cuts those rounds like a hot knife through butter Buckin'
I have a host of Stihl’s, a 372XP, and a few large Echos in my truck for work. They’re all set up to take modified lightweight Oregon & Tsumura bars with a Stihl mount. Getting everything set up to take the same bar & chain system is absolutely the way to go!
Another great video
donny ,billy awesome video ,this video means somthing baby .peace an love from scotland stu an family .godbess bily .
I actually have one of the original 372xp with 75cc engine in it! It's all original. Original cylinder, stickers everything. I love that saw.
Hindsight I wish I would have had Donny do the 75cc mod to my 372 when I sent mine to him. I like it far better than I did when I first got my 372, but "More Power" right?! Thank you for the Stihl bar info also. Keep on Buckin'!
Deadly for sure 👍
Gotta get me a pair of those boots 🥾 nice .
Love man nice job
Great video Buckin
Thank you for the lessons! Keep up the great work 👍
Glad your shoulder is better.
Great tips!
thanks 🙂
Love you Buckin’
Stay Safe
thx pal back atcha
Never realized that ripsaw was in my backyard
❤️❤️
Best axe in the world...I got my dream AXE
Nice 😊 !!!!🎉🤠🥳💯👌👌🤙now!!! It’s a party!!!!! Donny the kart!!! Man!!!!🥳🥳💯👍👍👍
"I do this from time to time and I'm quite happy about it"
Buckin I have two cotton wood trees i need taken down. they are right over one of my out buildings. not good. i will trade you a 79 ford 350 camper special 4wd 4 speed, 30k on a rebuilt 400 big block new edlebrock carb seat redone. love your vids. oh ya im in west central idaho. I know you like fords. couldnt go to a nicer guy..be safe my friend.
shoot me some photos on the email, can i fall em ?
Thank you.
I just went to there sight and all the bars are sold out. perfect..
Hey Buckin what kinda of chain did you have on the roll you made , I was just curious what your running. I would like to start making my own chain but not sure what’s a good brand. Is that exl ?
Is that the 51.4mm piston? I have a 372xpw that is marked as a 75cc and I’m afraid it’s getting close to needing built.
Hey Buck what am I supposed to do with the rackers when sharpening they supposed be where? I enjoy the videos bro.
A rollo at that 😂
every little bit helps ;)
Buckin, give us an update on the Castrol go 2t. Can you still find it in your neck of the woods? What else have you been using besides stihl or husqvarna oil?
never used husky .. only castrol 25 years
Billy I have a question, a while ago you showed cutting off the anti kick back rakers off of a chain, to make it a true full chisel chain. Did it work? More importantly did it help?
Frankin saw 🤪🌲
Hey buckin where can I get one of those bar think adapters
Another great video Buckin, Can you explain how to tell if a chain is destroyed? For example I was on a job and my saw was not cutting great so I stopped, filed my chain and on the first cut it lost it's edge. I did this a few times before just tossing it in the trash and buying a new chain.
if it does nt look sharp it wont cut period
@@BuckinBillyRaySmith What causes it to loose its edge on the first cut? Can the temper in the chain get ruined or would that more than likely be an issue with the filing itself?
Love the Videos Buckin! Anyone know where to find that gray clutch cover but for a 390xp? Thanks again
What gauge is that bar? Here In Finland stihl offers only .60 gauge bars and chains.
Can we get a review of the Chinese m660 copy. most homeowners and the common man need a option that won't break the bank.
not from me you cant. not a fan
How this work with the chain? Because Husky have 1.5mm and Stihl 1.6mm chain?
I wonder if I can put one of those bars on my old Mac Timber Bear, which is basically a Pro Mac 610?