I built the same thing almost. The only difference is I used a TP4056 with protection. I wired the negative ends together like you did and the positive directly to battery holes on the TP4056 then to the on/off switch then to the light and fan and you could always add a fuse and make a hole on the side to change it without ripping it apart. The reason I didn't use the charger here is I have several of them and most of them are way over. You only want 4.2v constant voltage and constant current and all of mine tested 4.7v and similar which killed my batteries. The batteries here have to put out a constant drain of 5.5 amp while the flashlight is on. This is counting the fan.
I think I got a problem that will take a Creative mind so I came to the right place. I balt a MOPAD 2018 model.My head lights on Bright are not enough to see dim setting is more of a joke! Any ideas that will not cast me a lot I paid 1,300$ for it so I'm out of cash and majer problems driven home from work. Any ideas I would be Much Appreciated!?!?!😀
Y aurait tilleul possibilités de faire une vidéo avec la fabrication d'une belle lampe torche de 100w avec module 12v->35v avec un potentiometre permettant de faire varier la luminosité de la led avec une batterie de 12v rechargeable et 18650 Merci à vous et continuer tout ce que vous faite 😃😃
Hey i never seen that type of drill bit over here or at the hard wares is that a special chineese drill bit? Cause if it takes that kind of drill bit how much in u.s dollars for one & what web page to find that bit etc
I rounded up most of the materials to attempt building this flashlight. But, am missing the battery charging port at base of light and the exact size of uPVC tube & reducer. Please supply this for me.
I built the same thing almost. The only difference is I used a TP4056 with protection. I wired the negative ends together like you did and the positive directly to battery holes on the TP4056 then to the on/off switch then to the light and fan and you could always add a fuse and make a hole on the side to change it without ripping it apart. The reason I didn't use the charger here is I have several of them and most of them are way over. You only want 4.2v constant voltage and constant current and all of mine tested 4.7v and similar which killed my batteries. The batteries here have to put out a constant drain of 5.5 amp while the flashlight is on. This is counting the fan.
You its king engineering😁😁😁🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆🏆
Желаю благополучия много новых проектов!!!
I'm Your very very favorite fan
Fantastic work, dude! 😃
I made a really similar one, but with a 10w LED and 3s batteries. 😃
where did you buy the led?
@@robertindabuilding2876 I bought it locally. But you can find them easily on AliExpress, Banggood, maybe even Gearbest and so on. 😊
Very good
Wow very nice👏👏👏👏
This is awesome 👍
Nice torch
U R MY 1 OF FAVURITE RUclipsR BRO...I WISH GO AHEAD....
Very nice looks like Chinese hand granade
Very nice Sir
Wow bro you have a very nice camera love from Pakistan😎😎😎😎😇😇😇😇
Hi Also Watch my channel #diyelectronicandhack
I actually want to say that..
Wish i could get a work shop like his one😪
Thanks I was making a powerful torch and you did it for me
You have to add some vents for air flow.
very good is the video I really liked the idea like from RD
😮😯😯😯😯 amazing idea you have
Thanks for making this torch very useful for me
Voce tem ideias fabulosa gostei.
super bright 👍 good idea
so nice Flashlight
Very good ...excellent work ...
nice video
Good job buddy...well I'm going to do this first..
oooralesss, muy chida idea, felicidades...
You are the best ceep it up
Excelente trabalho ...
Crazy scene Resident Evil, congratulations bro...
Good work ⚒
Nice flashlight kep it
up💜💜👍
from Bangladesh
Well done..Nicely made.Keep it up!!
U r always good.
You can do this without a fan blower, just put an adequate heat sink to save some battery
Крутий фанарік мені понравився корпус
Amazing bro
Nice kenh sang
Good ideas for transformer pipe PVC in lihgt led we are the champion.
He is a genius
Awesome video
Awesome
Super bright.
Good job.
Great work brother ❤❤❤
Olá vídeo muito bom!👍
Abraço 😷
Офигенное самоделки🤙
That 's great .. I like the idea .. keep going ...
Muito bom. Parabéns!!!
Great work but how much does it cost
Bardzo fajna latarką nawet bez soczewki robi swoje daję 5+
Wonderful Torch sir 👌👌👌👌😍😍😍😍😍
You have a heatsink, ok.
You have a fan, ok.
But you still need some f******* holes for the air in and out!
PVC is not that good heat conductor xd
The heat is coming out from the gaps infront of the pipe where the LED lens did not fully covered.
Nice ducks
Please make a video on pvc pipe gun with out alcohol
Hi Also Watch my channel #diyelectronicandhack
I watch your channel but you don't have that video
Wow good flashlight bro :D
Hi guys nice video
I think I got a problem that will take a Creative mind so I came to the right place.
I balt a MOPAD 2018 model.My head lights on Bright are not enough to see dim setting is more of a joke!
Any ideas that will not cast me a lot I paid 1,300$ for it so I'm out of cash and majer problems driven home from work. Any ideas I would be Much Appreciated!?!?!😀
চমৎকার হইছে
You from Indonesia? I see many patios that look similar to yours whenever I visit Java Island.
saludame porfa me gustan tuss videos
I like ur vids
great Job
Islam increases the beauty of life , Do not miss it my beloved brother
Задумка супер но легкче купить готовый фонарь
Vire nice vitamins 😘😘😘
that should have a dimmer, in situation you don't need full power or just want to save battery
Y aurait tilleul possibilités de faire une vidéo avec la fabrication d'une belle lampe torche de 100w avec module 12v->35v avec un potentiometre permettant de faire varier la luminosité de la led avec une batterie de 12v rechargeable et 18650 Merci à vous et continuer tout ce que vous faite 😃😃
What is with the fan? it blow's in a closed housing?
For add the fan you must drill a lot of holes in the case of the flashlight.
Use a pipe cutter and pull the whole system out. Never glue the end cap on where the switch is then make repairs and glue it back together.
Hi Also Watch my channel #diyelectronicandhack
MrBrymstond Yes u r damn correct.
Please subscribe to my channel and I'll sub u back
Nice
Too much paste
But. That's really good
Would it possible for you To do the same for scuba diving?
Wow Keep it up
Super.Karachi Pakistan
You are a legend
Really nice video quality. I wonder if you can share the brand of your camera.
His camera is most likely any decent phone attached to a gimbal.
good work
very nice
Which plastic it will use for hiding the joint 🤔🤔🤔
nice
Look at the ducks there like OMG WHAT IS THAT RUN!
Good idea
Dude I think you should build a bright right angle flashlight
Great Video Thank you!
Hey i never seen that type of drill bit over here or at the hard wares is that a special chineese drill bit? Cause if it takes that kind of drill bit how much in u.s dollars for one & what web page to find that bit etc
作る楽しみはあるけれど 買ったほうが安いと思います。でも楽しんでますね。
Muito bom show
Show de bola parabéns
Mr. I think it has a little LED in its thermal paste
I rounded up most of the materials to attempt building this flashlight. But, am missing the battery charging port at base of light and the exact size of uPVC tube & reducer. Please supply this for me.
Awesome....
🌟nice🌟
นึกว่าจะไม่ลงคริปแล้ว555ตกใจหมดเลย
Do a video where you restore your home
Why not remove the lens? The surface brightness of that led isn’t bright enough for a thrower. Just build an epic flooder with it.
Nice but about the fan it is working in close spaice and not mintioned in description.
Nice.
The pipe channel :p
Hi, Very Good! :3
mast