Hell yeah sweet sends that hill looks like a killer to walk lol. Awesome job though appreciate the work that goes into this for our entertainment nice work brother. 👊🚀
Did u see those 2 puffs of smoke come off on that front flip slow mo ?? Did ur esc go? Or was that just dust? No there’s no dust in that grass. Bad ass park and that typhon looks sick af
@@Tattoosandtoys it’s grass clippings, they just mow it down and leave it behind. It sucks because my rigs are full of the shit 😂 one of the small prices to pay playing in this spot 🚀🚀🚀
Is this your July jump challenge entry, or do you have a shorter version where you mentioned the jump challenge coming? Also hoping you give a little bit of details about the specs of your awesome ramp.
The pins in the diffs are breaking way too easy in my opinion. I have replaced 5 of them until now on my Notorious, 2 of them after the very first session. It's so annoying that i've decided to replace the entire diffs, front and rear with exb diffs. They are only 0.25 mm thicker on the Kraton, but i've never had an issue with them
@@andiprogshop3097 I’ve fixed it since then, it wasn’t the pin. It was the outdrive cup shaft that snapped in half. The pin was still fine! Luckily it was on the ring gear side so I didn’t have to pull the whole thing apart. Yea, the EXB diffs have a thicker shaft. But the gear ratios aren’t the same. An EXB diff in a typhon would suck because you’d have to go up on the pinion big time and that would push the motor out pretty far. I’ve bashed this car since this video and sent her a lot bigger and actually bend the titanium chassis and front center axel and stripped the screws out of the chassis braces but luckily they have a lock nut on top! Making a video of it now! Subscribe so you don’t miss it! 🚀🚀🚀
@@mikee2398 they came off of a FSR Adom that is exactly the same thing as a DR8 that is popular in Europe. You can find them online 😎👍🏻 my biggest worry was if they could handle typhon speeds and I haven’t had a blowout yet
@@ultramaga2398 haha could be both? 🤷🏻♂️ I know it’s not uploading in 1080p like it should. I’m gonna try again soon, I have a new video I almost finished editing so, we’ll see
@@richardbrown6762 😂 no, no one WANTS to break their toys. But, it’s what they’re made for. We take precautions to upgrade and avoid broken parts. To fix the damage on this run would cost the price of dinner for one night. I also get to wrench on my cars which I also enjoy. 1 differential pin and cosmetic stuff we don’t NEED but makes it look cool. This was a mild session. Also, EVERYTHING on them is replaceable. That’s what the term “hobby grade” comes from 🤘🏻😎 thanks for watching
@@richardbrown6762 you definitely haven’t watched kamakazi_RC, RCdude81, Keven Talbot, Aldo loyal and Rich dooperbash videos 😂 they’ve all gone WAY bigger than that and all have 20k plus subs. I for one am not as active as they are/were to gain popularity. If you were into the hobby you’d know what these things can do and appreciate the skill it takes to drive/build rigs like this. I would suggest having knowledge on the subject before making absurd comments on social media 🤷🏻♂️
Very nice air time. Perfect location and ramp setup. You really went the extra mile making this video. Awesome job!
@@RCRoads thanks brotha!
Nice flights ✈️ 🤟
Fawk yeah bro!! 🤟 🤟 awesome bashing! Big hill Big jump Alot of Fun! #SoarLikeAnEagle
@@stuntzbelowzero7255 the walk of shame is a serious punishment 😂 thanks bro!
Your brave with them blind landings!
@@jeremycravens6973 can kind of judge it by the rotation when you think it should land 😂
Nice sends brother🚀that parks mad busy you should charge all the spectators🤔 hope to see Q-tip in future videos 🤣😎👊🏻
@@JPRC_CRAZINESS right? It’s always a crowd when I start sending no matter where I go. These things demand attention 😂
Hell yeah sweet sends that hill looks like a killer to walk lol. Awesome job though appreciate the work that goes into this for our entertainment nice work brother. 👊🚀
@@danielthompson9557 thanks brotha! Yea, that hill is like a staircase. Steep and goes on and on 😂
Some epic sends😮 walking up that steep hill gotta suck😂 next time you should put a basket on the ground as a tip collection
@@Rangoli_rc 😂 hell yea! I’ll gladly accept tips!
@@Rangoli_rc hell yea! No free admission 😂
Did u see those 2 puffs of smoke come off on that front flip slow mo ?? Did ur esc go? Or was that just dust? No there’s no dust in that grass. Bad ass park and that typhon looks sick af
@@Tattoosandtoys it’s grass clippings, they just mow it down and leave it behind. It sucks because my rigs are full of the shit 😂 one of the small prices to pay playing in this spot 🚀🚀🚀
Nice bashing session
Is this your July jump challenge entry, or do you have a shorter version where you mentioned the jump challenge coming? Also hoping you give a little bit of details about the specs of your awesome ramp.
@@EastTactics I made this before I knew of the challenge. I didn’t know I needed to mention anything or describe my ramp. I’ll see what I can do
ah nice soft grass to land from the flights
@@nathan2000100 not soft enough lol the next video I’m working on, I bent the titanium chassis on the typhon 🤫
That grass is no bueno!
@@jeremycravens6973 it is soft but the electronics don’t like it 🚀
The pins in the diffs are breaking way too easy in my opinion. I have replaced 5 of them until now on my Notorious, 2 of them after the very first session. It's so annoying that i've decided to replace the entire diffs, front and rear with exb diffs. They are only 0.25 mm thicker on the Kraton, but i've never had an issue with them
@@andiprogshop3097 I’ve fixed it since then, it wasn’t the pin. It was the outdrive cup shaft that snapped in half. The pin was still fine! Luckily it was on the ring gear side so I didn’t have to pull the whole thing apart. Yea, the EXB diffs have a thicker shaft. But the gear ratios aren’t the same. An EXB diff in a typhon would suck because you’d have to go up on the pinion big time and that would push the motor out pretty far. I’ve bashed this car since this video and sent her a lot bigger and actually bend the titanium chassis and front center axel and stripped the screws out of the chassis braces but luckily they have a lock nut on top! Making a video of it now! Subscribe so you don’t miss it! 🚀🚀🚀
I really enjoyed watching this video I do 1/24 scale crawling on my channel but everyone loves a good basher 😂got my sub🤘✌️
@@shawnrichardson118 thanks brotha! I try to keep things entertaining for you guys, I’m glad you enjoyed
Where did you get that typhoon body from
@@mr.wednesday4929 local hobby shop and painted it myself
where did you get that typhon body
@@remembermewhenyourfamous I bought a clear typhon body and chopped it to fit over the center brace and painted it myself
Nice jumps, but i think you need to be able see better where it lands, thats some huge hill, lol.
@@402Racing yea, next session I will stand back more from the ramp so I can see down the hill better
What wheels do you have on that Typhon?
@@mikee2398 they came off of a FSR Adom that is exactly the same thing as a DR8 that is popular in Europe. You can find them online 😎👍🏻 my biggest worry was if they could handle typhon speeds and I haven’t had a blowout yet
@RC_Berserker awesome thanks. Great video
Please get a better camera other than that awesome video.
@@ultramaga2398 I do have a 4K camera. I’m working out the bugs. Been trying to upload in HD and not sure why it keeps uploading in low quality
@RC_Berserker maybe it's just my eyes and I can't see well.
@@ultramaga2398 haha could be both? 🤷🏻♂️ I know it’s not uploading in 1080p like it should. I’m gonna try again soon, I have a new video I almost finished editing so, we’ll see
That's nonsense😮😐
@@richardbrown6762 what do you mean?
@@RC_Berserker I mean those crazy high jumps is nonsense if you want to break your car use a hammer
@@richardbrown6762 😂 no, no one WANTS to break their toys. But, it’s what they’re made for. We take precautions to upgrade and avoid broken parts. To fix the damage on this run would cost the price of dinner for one night. I also get to wrench on my cars which I also enjoy. 1 differential pin and cosmetic stuff we don’t NEED but makes it look cool. This was a mild session. Also, EVERYTHING on them is replaceable. That’s what the term “hobby grade” comes from 🤘🏻😎 thanks for watching
@@RC_Berserker I'm not trying to rude but if you make a more realistic jump I believe you will get more viewers 😎👍
@@richardbrown6762 you definitely haven’t watched kamakazi_RC, RCdude81, Keven Talbot, Aldo loyal and Rich dooperbash videos 😂 they’ve all gone WAY bigger than that and all have 20k plus subs. I for one am not as active as they are/were to gain popularity. If you were into the hobby you’d know what these things can do and appreciate the skill it takes to drive/build rigs like this. I would suggest having knowledge on the subject before making absurd comments on social media 🤷🏻♂️