VW/Volkswagen Tiguan How to Change Replace Right Front Brake Pads and Rotors
HTML-код
- Опубликовано: 10 сен 2024
- In this video, I will show you how to the VW/Volkswagen Tiguan How to Change Right Front Brake Pads and Rotors.
Do you want to see more tutorials? Send EJ tip through Paypal to support the channel:
paypal.me/ejga...
You can purchase the tools and parts from my affiliate links below:
1. FRONT PADS - Bosch BP1375 QuietCast Premium Semi-Metallic Front Disc Brake Pad Set
amzn.to/2HOFbG0
2. REAR PADS - Akebono EUR1348 EURO Ultra-Premium Ceramic Brake Pad Set
amzn.to/2CL1jx3
3. FRONT ROTORS - Detroit Axle - 12.28" (312mm) 5 Lug FRONT Drilled and Slotted Brake Rotors For Audi VW Models - Check Fitment Chart
amzn.to/2U4szRD
4. REAR ROTORS - Detroit Axle - 11.25" dia (286mm) REAR Drilled and Slotted Brake Rotors For FWD ONLY Audi A3 Quattro Volkswagen CC GTI Jetta Passat Tiguan
amzn.to/2CL1jx3
5. Lisle 13410 Disc Brake Caliper Brush
amzn.to/2HL30yF
6. 2 of CRC 05084 BRAKLEEN Brake Parts Cleaner - Non-Chlorinated - 14 Wt Oz
amzn.to/2HWVNuA
7. Pro-LifT T-6906D Double Pin Jack Stands-6 Ton
amzn.to/2UhqQIg
8. Liftmaster 3 Ton Heavy Duty Ultra Low Profile Steel Floor Jack with Quick Lift
amzn.to/2U6BuSS
9. Craftsman 450-Piece Mechanic's Tool Set
amzn.to/2OzHSf6
10. Neiko 00206A 1/2 Inch Drive Premium Breaker Bar, 24" Length | Cr-V Steel
amzn.to/2HLUpvx
11. TOOLTOQ 1/2" 30-150FTLB Torque wrench set, [Protector impact sockets]
amzn.to/2WxWGxD
12. DISC Brake Piston Separator-Disc Brake Pad Spreader Tool - Caliper Piston Compressor - Steel Separator for Car Pistons - Heavy Duty Auto Plates T-bar Hand Tool JTC J01
amzn.to/2HP3nrN
13. Permatex 80078 Anti-Seize Lubricant - 8 oz. Bottle
amzn.to/3cZ6vQi
Thanks for this channel! My son bought a used Tiguan, appreciate your time sharing! For people doing brake jobs for the first time, it’s helpful to use a hi grade synthetic grease on certain parts of the brake pads that are in contact with caliper and also on the caliper guide pins. And as some other commenters suggested, loosen all the way your brake fluid reservoir because when you depress the caliper, you are forcing brake fluid back into the reservoir. If you added brake fluid since the last pad change, it can overflow so keep an eye on that. Thanks again!
My pleasure Pastor Fred and God bless you and your family.
Thank you guys! You guys save me a lot of money. I’ve never been mechanically inclined and with this pandemic going on I’m fixing my 2016 Tiguan myself. I feel like this Tiguan I have is my starter mechanic car. Easy convenient car to fix.
My pleasure and please stay safe from the Covid-19
Kudos to your child 👏 helping daddy to complete the job. Great team work! Very informative video to save $$$$.
Thank you very much John 😀🙏
I watched your Tiguan maintenance videos a few years already. I have a Tiguan 2012. I follow you to do all the same tasks on my car. I did save big money. Thank you very much. You and your daughter are the best team work.
Our pleasure. We are glad to hear that the videos have helped you save big money.
Thank you for this video. Made it very approachable. I saved at least $600 compared to the estimate I received from a mechanic. I have a 2018 Tiguan which is a little different but overall mostly the same process (mine doesn't have that clip you were working with).
My pleasure Matt
You can purchase the tools and parts from my affiliate links below:
1. FRONT PADS - Bosch BP1375 QuietCast Premium Semi-Metallic Front Disc Brake Pad Set
amzn.to/2HOFbG0
2. REAR PADS - Akebono EUR1348 EURO Ultra-Premium Ceramic Brake Pad Set
amzn.to/2CL1jx3
3. FRONT ROTORS - Detroit Axle - 12.28" (312mm) 5 Lug FRONT Drilled and Slotted Brake Rotors For Audi VW Models - Check Fitment Chart
amzn.to/2U4szRD
4. REAR ROTORS - Detroit Axle - 11.25" dia (286mm) REAR Drilled and Slotted Brake Rotors For FWD ONLY Audi A3 Quattro Volkswagen CC GTI Jetta Passat Tiguan
amzn.to/2CL1jx3
5. Lisle 13410 Disc Brake Caliper Brush
amzn.to/2HL30yF
6. 2 of CRC 05084 BRAKLEEN Brake Parts Cleaner - Non-Chlorinated - 14 Wt Oz
amzn.to/2HWVNuA
7. Pro-LifT T-6906D Double Pin Jack Stands-6 Ton
amzn.to/2UhqQIg
8. Liftmaster 3 Ton Heavy Duty Ultra Low Profile Steel Floor Jack with Quick Lift
amzn.to/2U6BuSS
9. Craftsman 450-Piece Mechanic's Tool Set
amzn.to/2OzHSf6
10. Neiko 00206A 1/2 Inch Drive Premium Breaker Bar, 24" Length | Cr-V Steel
amzn.to/2HLUpvx
11. TOOLTOQ 1/2" 30-150FTLB Torque wrench set, [Protector impact sockets]
amzn.to/2WxWGxD
12. DISC Brake Piston Separator-Disc Brake Pad Spreader Tool - Caliper Piston Compressor - Steel Separator for Car Pistons - Heavy Duty Auto Plates T-bar Hand Tool JTC J01
amzn.to/2HP3nrN
13. Permatex 80078 Anti-Seize Lubricant - 8 oz. Bottle
amzn.to/3cZ6vQi
Thank God for dahling's help on this brake job.
👍👍😃
Excellent teacher and great camera footage. Didn’t leave anything out
Thank you very much
About to do the front brakes on my 2017 VW Alltrack for the first time, this is a HUGE help!!!
Good luck Jeff, you can do it! It is similar to the the Tiguan 😀👍Let me know how it goes.
@@ejsgarage I've done brakes before, 30+ years of car ownership and maintenance... Just hadn't done them on my Alltrack (but I've done VW and Audi brakes many times).
Went OK... I live in the Northeast, which means snow/ice and road salt. The rotors had to be heated with a torch to get them off. The bolts than hold the caliper frame in place were VERY tight! Other than that, it went about as well as brakes will go. Saved a bunch of money for about 3 hours of work.
FYI... The brakes on the front end of a Golf are a little different than those of the Tiguan. There are no springs to remove. Just the two bolts for the piston assembly and two bolts for the caliper frame. Oh yeah, a #30 Torx bit for the single screw that holds the rotor on the hub.
That is good that you were able to get it done in 3 hours. Good job and thank you very much for letting me the difference between the Alltrack and Tiguan.
When you are putting drilled and slotted rotors you have to watch the directions of the slots. They are there for a reason. I think you put the right hand side rotor to left side and vise versa.
Regarding loosen up the bolt caliper-handle direction of torque wrench downward for the right side and upward for the left side that you mentioned bizarre, i think it is based on known way bolt direction: loosening is counter-clockwise and tightening clockwise direction.
That's probably why 😃
Hey EJ, you’ve inspired me to give this a try. Thank you!
You can do it brother 👍
Just to say HI! And, I'll leave this topic of yours to my husband to watch! He loves your videos, and I love the ones with your parrots! Best regards, and have a great Sunday and a week to come!
Hi Milica. Thank you very much for saying Hi! I hope you and your husband are doing well. Have a wonderful weekend ☺️😉😃
@@ejsgarage Thank you so much. All the best to you and your family!
Thank you very much 😉😃
Thank you! Saved me a couple hundred bucks
My pleasure 😊
This video is funny 😂😂😂😂😂
Nice job. The two caliper bracket bolts are definitely 200Nm or about 148ftlbs. Looking at a VW workshop manual in front of me.
Thank you very much
Thank you! I thought 95 ft/lbs sounded low myself. Any torque specs on the T40 bolts that secure the caliper piston too? Nice video!
@rickwhitfield7617 My pleasure
Thank you so much !!! Did this today with success Saved me alot of money!!
My pleasure. It is an easy job that costs a lot at the dealer. I hope that you will subscribe to my channel 😀
Thanks for showing Brother very handy tips I enjoyed your video
My pleasure Brother David. I hope you, Myriam and your mother are doing well. 😉😃
Please upload the rear brake job too 👍
Forgot to clean the piston rubber boot befor using push tool you don't want contaminated dirt getting it 💪
Thank you for the detailed video very informative and helpful! 😀😀
My pleasure Jon 🙏
Please rethink about something. Loosing is counter clockwise, not up or down ! 😂 so it's normal to go up on left side and down on the right side. The rest of it, good job !!
Lol thanks
Nice video
Thank you
Great video! Helped me alot
Thank you very much Ken
New to the channel and no sure if u were joking or not but @6:40 " its really bizarre that on the left you have to bring it up and on the right u have to bring it down to loosen" lololol. No its not bizarre. its the same on every single car because no matter what side u are its still turn anti-clockwise to loosen... for pretty much any screw anywhere on anything in the world (except the few specificall made to be the opposite). U are literally turning both in the same direction.
lol that is true. 😂🤣🤣 Thank you for watching 😃
Great video. Saved me about $1300!! Everything went fine but now there’s a squeak from the breaks just when the car comes to a stop. Any suggestions???
It should stop soon, did you use the Bosc quiet cast pads? New pads and cross drilled rotors squeak a bit.
Good video, but when pushing the piston back at 30:56 you should really loosen off the brake fluid reservoir cap to stop the build up of pressure.
Thank you very much for the tip.
It's even better to open the bleed valve.
👍👍👍
Great job bro really helped out thanks for the vid
My pleasure. I hope that you will subcribe to my channel 😀
Awesome vid! Thank you
Thank you very much Cindy :)
Hi EJ, what did you use as the jack point for your floor jack? Thanks for the video!
There is an arrow pointing down mark in the bottom of Tiguan if you look closely.
@@ejsgarage Okay, that makes sense. Was there enough room on the reinforced pinch weld to get your floor jack in place next to your jack stand?
@@tomlatham8482 Oh yes, make sure pick the hardest part of the frame
@@ejsgarage okay, thank you!
thanks for ice sharing!
My pleasure. Have a wonderful Sunday 😉
Indonesia hadir om
Selamat pagi Hari. Terima kasih banyak ya buat kunjungannya ☺️😉😃
Thanks for the tips
My pleasure Zam 😀👍
God bless you
Thank you very much. God bless you too.
Greetings, friend... Good work....!!!
Thank you very much Olivier. Have a great Sunday 😊
thank you
You're welcome
95ft? It's actually supposed to be 200nm which is about 150ft torque 😬
👍
I understand this is a old post, but do you know why the brake pads I bought have the sensor attached to them ? Same as with the ones you posted with a link. But in the video it shows you have no sensor attached to your brake pad.
The sensor is on the driver side. 😃
Love your videos man. Any idea how to get the 75 827 without buying the whole toolset?
Thank you Ethan. Try the autozones auto part
Great video , what year is your Tiguan? my is a 2012 and it comes w/ the with Electronic brake
Thank you very much. Mine is 2013, the rear brake is pain in the neck. I have done it but I have been avoiding making the video lol
I hope the loosening thing was a joke
Hello, did you ever have to de-carb your engine valves?
No I didn't yet
I Ej, what is the name of the aluminium liquid you put at 22:30 and is it possible to tell me if its available on amazon ! Thanks a lot
Hi William, thank you for reminding to list the item. It is the Permatex liquid amzn.to/3cZ6vQi
@@ejsgarage thanks for the fast reply 💯
My pleasure Will.
Like brother
Thank you very much Yashkuri 😃
Please upload the rear break job soon!!!
I sold the Tiguan already.
Good video, just a question where do you find your torque specs. If you could share that I would appreciate it.
Thank you. I saw it sometimes ago on VW forum 90 to 95 front and 59 rear.
@@ejsgarage foot pounds or Newton meters?
FT LB
Will this be the same for a 2011?
Yes, the same.
Did you ever have time to film a rear brake video? Would love to see that!
I sold the Tiguan due to the pandemic. We didn't drive the Tiguan for months.
@@ejsgarage Totally understand! Curious, did you consider the rear difficult because of having to release the parking brake, or was there something else that made it harder to do than the front?
I did change it but I didn't make a video. You need to remove the EBrake and wind it manually or use an OBD2 like my Autel scan tool that has ebrake disabling feature . It was pain in the neck. You also need a special torx bit for removing the caliper.
Thanks for helping I'm just gonna try to change them to i never did a vw car, i have a question i have a 2010 vw tiguan how can i find what type it is s, se or sel please ??
My pleasure. You can see it by using the car VIN number. It is on the driver side window.
What year tiguan is this?
2013 SEL 4Motion
u know what you doing
Thank you
Other than being an ugly teenage girls car, it’s a pretty solid vehicle. Can tow 5000lbs (per uk rating), can fit 8 foot 2x4 with trunk closed, can handle mild off roading, can cruise at 110mph all day.
lol ugly teenage girls car. I never heard before.
@@ejsgarage all the girl teenagers drive there around here..... aaaaannnndddd so do I 😂
Hi EJ, how r these pads and rotors holing up?
They are awesome. I love it. You can't go wrong with BOSCH
One mistake need t45 torque socket
Thank you very much David! :)
Wow you must be college educated
Thanks
What size socket to remove the caliper bracket?
it is the t45, you can watch this video ruclips.net/video/69cS1i2adf8/видео.html
@@ejsgarage I did watch the video I just didn't catch what size for the caliper bracket the caliper is a t45 and the rotor was a T25 thank you
2013 Tiguan my girlfriend drives brake place says she needs a special key to take the tire off anyone ever heard of such a thing
Yes, VW comes with a wheel lock. The key should be in the trunk next to the spare tire or front compartment.
@@ejsgarage all of that stuff was gone.
Ebay sells it for $6.99 to $20.
Do i have to get a computer and put the car into service mode as I have the handbrake on a button not a mechanical handle?
For the rear brake, you need a computer to disengage the electric brake
@@ejsgarage thanks