Nice job . I have questions , the K bus and k-can bus are the same ? K bus have one wire ? The signal voltgate of it is the battery voltage???? That seems odd!!
So when I plug in I get 61 faults they will all clear but D904 K-CAN Line Fault. Car starts everything works blinkers head lights if you didn’t plug in you wouldn’t Evan know there was an issue. So in my case is it the (champ) central head unit and multimedia? I’ve never had a can issue with anything so wouldn’t Evan know where to test if there was a short. I’ve wanted a good head unit anyways for some loud tunes Any help is greatly appreciated
Looking at the diagram, the diagnostic line between the scan tool and the network did not directly connect to any networks and went directly to the cluster indicating this is the gateway on this vehicle connecting Communication buses. Hope this helps
So what does it mean if I'm told that "K bus monitors need to be reconnected". I have the opportunity to buy a Cooper S and the current owner is telling me this is an issue.
Hi everyone, I've been trying to search out this problem but I can't seem to find anyone who has had all the symptoms I'm having at the same time. So I have a 2006 base Mini Cooper and the EP light continues to flash on and off and when this happens the car randomly shifts gears and most of the time it seems to down shift because the RPMs go up. On top of that the temperature gauge needle will go all the way to the top as if indicating the car is overheating though it is not. Also the tachometer and all the lights on it (check engine and brake) will go completely dead. The speedometer will also die too. Also a number of warning lights will come on and some seem to stay on permanently, like tire pressure sensor, while others just flash on temporarily. This happens for a couple seconds at a time and then things just go back to normal, but things like the check engine light and tire pressure light stay on. This used to be a sporadic occurrence, but now I can't even drive the car because it just keeps bucking so much from the random shifting it's doing. It's almost like the car is possessed. Has anyone ever encountered anything like this. Thanks
hello mate. what you've wrote sounds exactly like what I have right now. did you find a resolve? ive heard it could be a short in the wiring somewhere or an issue with the bcm but have yet to resolve. Did you fix this yet
@@chrismarkwick1761 on my Mini it ended up being a pigtail on the rear bumper/valance. The pigtail got loose and rested on the exhaust, melted both K wires to the bulb ground. Probe the k circuit to see if it has direct ground or Bat+. Trace from there.
Nice job .
I have questions , the K bus and k-can bus are the same ?
K bus have one wire ? The signal voltgate of it is the battery voltage???? That seems odd!!
Great find Ryan! Brilliant video and explanation 👌
Thank you & thanks for stopping by and watching!
Great video and explanation of system Ryan... keep up the good work
Thanks, Lawson! Much appreciated. Thanks for watching
Well done Ryan thanks for sharing
So when I plug in I get 61 faults they will all clear but D904 K-CAN Line Fault. Car starts everything works blinkers head lights if you didn’t plug in you wouldn’t Evan know there was an issue. So in my case is it the (champ) central head unit and multimedia? I’ve never had a can issue with anything so wouldn’t Evan know where to test if there was a short.
I’ve wanted a good head unit anyways for some loud tunes
Any help is greatly appreciated
Great job. Thanks for sharing
Thanks for taking the time to share 👍🏻
Your welcome, thank you for taking the time to watch
Another great video. Keep them coming
Thank you & Thank you for watching
Thank you Ryan. Good job. Have a blessed and safe New Year to you and your family.
Thanks, Billy, i wish you all the best to you and yours also.
How did you know the cluster was the gateway?
Awesome video
Looking at the diagram, the diagnostic line between the scan tool and the network did not directly connect to any networks and went directly to the cluster indicating this is the gateway on this vehicle connecting Communication buses. Hope this helps
Elite Automotive Diagnostics like a tipm on a Chrysler. I got ya
So what does it mean if I'm told that "K bus monitors need to be reconnected". I have the opportunity to buy a Cooper S and the current owner is telling me this is an issue.
Job well done.....skilllllls 🔥🔥🔥
Great job
Thanks for watching 😄
That's an interesting one. Nice find Ryan
Thanks Cuba ❤
Hi everyone,
I've been trying to search out this problem but I can't seem to find anyone who has had all the symptoms I'm having at the same time. So I have a 2006 base Mini Cooper and the EP light continues to flash on and off and when this happens the car randomly shifts gears and most of the time it seems to down shift because the RPMs go up. On top of that the temperature gauge needle will go all the way to the top as if indicating the car is overheating though it is not. Also the tachometer and all the lights on it (check engine and brake) will go completely dead. The speedometer will also die too. Also a number of warning lights will come on and some seem to stay on permanently, like tire pressure sensor, while others just flash on temporarily. This happens for a couple seconds at a time and then things just go back to normal, but things like the check engine light and tire pressure light stay on. This used to be a sporadic occurrence, but now I can't even drive the car because it just keeps bucking so much from the random shifting it's doing. It's almost like the car is possessed. Has anyone ever encountered anything like this. Thanks
I just had very similar symptoms… diagnosing now
hello mate. what you've wrote sounds exactly like what I have right now. did you find a resolve? ive heard it could be a short in the wiring somewhere or an issue with the bcm but have yet to resolve. Did you fix this yet
@@chrismarkwick1761 on my Mini it ended up being a pigtail on the rear bumper/valance. The pigtail got loose and rested on the exhaust, melted both K wires to the bulb ground. Probe the k circuit to see if it has direct ground or Bat+. Trace from there.
👨🔧👍