Wire Art DIY - Chicken Wire Viking Ship Part 3 | Spiral Crafts

You can make a multimedia Viking Ship with Sail by following this series of three DIY step by step photo tutorials.
It's perfect for chicken wire art lovers as a garden decoration (although best to roll the sail up on windy days!) and would look great sailing through a sea of grasses or ground hugging plants.
These tutorials are recommended for INTERMEDIATE sculptors who have made chicken wire sculptures before and only require high level instruction.
TOP TIP: When hemming the sides of the sail, cut the webbing in half. That way, it goes further and you don’t get too much glue in the seam.
Tutorial #1 will show you how to make the body of the Viking Ship, tutorial #2 the shields and tutorial #3 the sail, mast and supports.
Tutorial #1 is here: • Wire Art - Chicken Wir...
Tutorial #2 is here: • Wire Art DIY - Chicken...
This is Tutorial #3
This tutorial would get extremely long if I showed the complete end to end process in a single tutorial, but if you have any questions then please comment below.
Tools (for the ENTIRE project):
• Round nosed pliers
• Flat nosed pliers
• Tape measure
• Tinsnips
• Heavy duty wire cutters
• Pinking shears
• Dark fabric pencil
• Ruler
Materials (for the ENTIRE project):
• Chicken wire 13mm hole (sheets - 1 x 29hex/12hex and 2 x 29hex/23hex)
• Stainless steel galvanised wire, 1mm diameter (approx 58cm, 2 x 29cm pieces)
• Stainless steel galvanised wire, 0.7mm diameter
• Aluminium wire 2mm diameter (Do not cut from reel. 6 shields to make so at least 3m in length approx, maybe more)
• Hollow Steel rod/tube - 1m long and 1.2cm diameter (Plastic could be used but this rod is pushed into the ground so would need to be strong)
• Wooden dowl - 900cm long and 9mm diameter (2 x 41cm metal/plastic rods would also work)
• Fabric - red and white stripes, 38cm wide and 50cm tall
• Fabric mesh to glue seams of sail - this can also be sown if you want to do that
Please give this tutorial a thumbs-up if you enjoyed it and hit the subscribe button so you see the upcoming videos for Wire Sculpture beginners too.
For new tutorials sent directly to your inbox, sign up for the free newsletter here: spiralcw.wixsi...
WANT A READY MADE SCULPTURE TO GO IN YOUR GARDEN?
No problem!
Visit the Spiral Crafts Etsy shop for garden ready items or have a sculpture made especially for you.
ETSY shop here: www.etsy.com/u...
COMMISSION a sculpture : spiralcw.wixsi...
If you would like to see more tutorials about wire sculpting, then please leave a comment below and I’ll do what I can to get tutorials made.
If you would like to support this channel so I can keep making more free tutorials then you can Buy Me A Coffee here: www.buymeacoff...
Thank you for watching,
Sandy@Spiral
#wireart #howto #DIYGarden #Vikingship #mixedmedia