Thank you all for the awesome feedback on this video and following along for the journey! Rember you can enter to WIN this bike right here: kincadepavich.com/item/ktm-200-giveaway/
I think the holes you`re talking about at 10:00 are for the plastic chain mud guard that comes on the road legal EXC versions of this bike, I think they`re required to be installed from the factory here in europe for some reason, but i`m not entirely sure on that.
A solution to your clutch tool would be to have your buddy weld a few old steel clutch plates together, and weld on a handle that clears the basket. This will support the clutch basket all the way around and distribute the load onto all the teeth and not just two. Only downside is, its a motor specific tool and not a universal tool like you have. However, if you find yourself rebuilding the same type of motor all the time, the homemade tool is much nicer to use.
Post number 8 of trying to convince Kincade to do a subscriber rebuild! 03 ktm 125sx!!!! Also unicycle is wicked 😂😂 I switched my handle man! Just in case😂
Hey, talking about that hole in swingarm 10:00 it is there so you can add chain guard, that goes on top, like you see on street bikes. Nice videos, keep it up!
Incredible how you crank that ktm and very good on that hard enduro. You have me focused on your videos good transformations to those bikes almost for scrapping. Keep it up! Greetings from Spain brother 🔥🇪🇸
As someone who recently got into dirtbikes again from when I was a kid to now an adult with 0 mechanic skill. These videos are really inspiring to try picking up a project bike and learn! I dont have the space for it at the moment, but it's a really fun idea to have and something I might do in the future. Thank you and this was a really well put together video and story!
Mr. Kincade: my name is Clifton Riley love riding dirt bike's but never really learned how to ride one properly . When I came across your web. Page ,I was automatically hooked .looking forward to viewing more, as soon as I get the subscription part done. Again THANK YOU so very much for doing what & you do it ,,very well
30:30 ouch man. I felt the pain. I'm always so nervous tightening clutches for that reason. Wrapping the full length of a ratchet strap (minus the ratchet) around the hub and anchoring that to the work bench seems to be a really solid way to do it. The pressure is evenly distributed, and it holds well. I feel like an idiot when I do it that way, but it's never failed me, and no metal on metal.
man, I've been drooling over this bike since watching you build it. I'm currently riding a 2015 ktm 300 xcw for trail riding and desert but something about that 200 has made me want to try one. most definitely going to buy some entries!
Only half way thru loved the intro mtb wheelie the whole time looking at the camera . I have a 07 200 exc bought new best bike ever , yours definately got the bling going on surprized you running the orange rear spring i find the white pcs spring way better as its way more progressive the orange lone is linear .200 rules .
Kincade, that unicycle scene had me thinking... But I need the training wheel in front of me!! So, with that said, I'll stick with my bicycle!! Nothing wrong with being 95% underbiked!! Get out there and play...
Such a transformation on that bike I have a kx250 21 model that i attempt hard enduro on and i get some weird looks doing it on a 4 stroke but id love to have a 2 stroke to try enduro with
You're making me question buying an 06 for $1k near me that needs a rebuild haha. I already own one that needs a rebuild, figured I may as well rebuild two at a time and have 2 of my favorite bikes in my garage.
Feel free to bless me with some spare parts lol got an 07. Rode it twice had to rebuild the suspension completely including having the bottom rear clicker drilled out and now needs a top and bottom rebuild. Only rode it for an hour 😅
man the winner will be lucky i wloud try to enter but i cant cause im from slovakia im rideing a cr125 i think its a 1995 with kayaba forks that look like a 80s forks and a kx80 engine with a enduro sprocket and cant even work yet so im stuck with a booty bike that needs so much investments that its not even worth it i wloud be lucky if i cloud get a 1990s dt125r but they are still like 1 to 1.5k keep doing great content man hope you reach 200k soon
Man you built a awesome bike and I love the build up I’m watching now so I’mhoping you d pick my name I’ve literally been trying for find a bike to fix cause I’m not really in a position to buy one and I’m really wanting to ride brother how many times can I enter lol
Oh no it just locked up I think I did same thing with a 350 Chevy bow tie life barring there were spun going to get a starter out of the problem cool pick Earl The Pearl Gilbert help me out thank you for the chance to win your in tune with life and people waiting for the call ha ha
Thank you all for the awesome feedback on this video and following along for the journey! Rember you can enter to WIN this bike right here: kincadepavich.com/item/ktm-200-giveaway/
The camera lens had it's priorities straight at 13:05
Dude your videos are getting so good😂🤜🏽the backwards unicycle clip had me dying
I think the holes you`re talking about at 10:00 are for the plastic chain mud guard that comes on the road legal EXC versions of this bike, I think they`re required to be installed from the factory here in europe for some reason, but i`m not entirely sure on that.
A solution to your clutch tool would be to have your buddy weld a few old steel clutch plates together, and weld on a handle that clears the basket. This will support the clutch basket all the way around and distribute the load onto all the teeth and not just two. Only downside is, its a motor specific tool and not a universal tool like you have. However, if you find yourself rebuilding the same type of motor all the time, the homemade tool is much nicer to use.
Kincade your dedication persistence and having fun is what we the fans enjoy.. 😁💪🙏🏁
Post number 8 of trying to convince Kincade to do a subscriber rebuild! 03 ktm 125sx!!!! Also unicycle is wicked 😂😂
I switched my handle man! Just in case😂
G Luck
@@leonamadeusivkovic911 thanks man!
03’ 125 Ktm is shit I finally got mine sold
@WcTrace one of the best bikes I've owned man 🤣 sorry. 😅 what did you get?
I'm down for this video, giveaways are cool but helping a subscriber with a bike would be awesome, especially during the winter
This is by far my favorite video by you! Great story telling good editing great explanation on the build aspect
Hey, talking about that hole in swingarm 10:00 it is there so you can add chain guard, that goes on top, like you see on street bikes. Nice videos, keep it up!
Who builds the sickest dirt bikes on the internet? Camron Niemela followed very closely by Kincade hot on his heels.
Followed since the beginning! Love machines with a story and this one is just built different 💯
This is so good! Work of art Kincaid :)
Epic video, but I'm pretty sure it's against the law to leave the 200 club once you've joined...
Incredible how you crank that ktm and very good on that hard enduro.
You have me focused on your videos good transformations to those bikes almost for scrapping.
Keep it up!
Greetings from Spain brother 🔥🇪🇸
As someone who recently got into dirtbikes again from when I was a kid to now an adult with 0 mechanic skill. These videos are really inspiring to try picking up a project bike and learn! I dont have the space for it at the moment, but it's a really fun idea to have and something I might do in the future. Thank you and this was a really well put together video and story!
Mr. Kincade: my name is Clifton Riley love riding dirt bike's but never really learned how to ride one properly .
When I came across your web. Page ,I was automatically hooked .looking forward to viewing more, as soon as I get the subscription part done.
Again THANK YOU so very much for doing what & you do it ,,very well
that is one sick build, video and story! Thanks for sharing kincade!
30:30 ouch man. I felt the pain. I'm always so nervous tightening clutches for that reason. Wrapping the full length of a ratchet strap (minus the ratchet) around the hub and anchoring that to the work bench seems to be a really solid way to do it. The pressure is evenly distributed, and it holds well. I feel like an idiot when I do it that way, but it's never failed me, and no metal on metal.
Side note, I'd totally run that hub hahaha. I don't race though.
man, I've been drooling over this bike since watching you build it. I'm currently riding a 2015 ktm 300 xcw for trail riding and desert but something about that 200 has made me want to try one. most definitely going to buy some entries!
You should do a KDX next
Only half way thru loved the intro mtb wheelie the whole time looking at the camera . I have a 07 200 exc bought new best bike ever , yours definately got the bling going on surprized you running the orange rear spring i find the white pcs spring way better as its way more progressive the orange lone is linear .200 rules .
This is another beautiful bike man your bike builds are awesome
Good videos love it
Swingarm hole is most definitely a drain hole my RM250 has three different random holes and they’re for draining if water or dirt gets inside
Great video, very well done.
incredible is an understatement, killer job!
As an avid viewer…..This was a great series and the bike came out amazing
Wait, so how do you feel about the older small frame 200s?!
37:20 I was thinking about this the other day, would like a Yamaha petcock bolt up? They're much shorter.
For high horsepower snow bikes grindhard plumbing co made one out of a hyabusa, they had issues with it shredding the timber sled drive belts.
Hey man im a local in gallatin valley love the work you do keep it up!!
just wrap a shop towel around the clutch hub and stuff it tight into the space between it and the clutch basket. no broken stuff
a masterpiece build👍♥️
Fair effort 8th , nice bike, nice bike
I'm 15 years old, but a bike like that is a dream🤩
Such a sick vid!!!
Sweet! Seems that bike needs to come to South Africa 😊
Always enjoy your videos 👍🏻👍🏻👍🏻🇬🇧
the unicycle is a must
Yes! Under three hours
i live in the sliver valley and i raced in silver kings all but this year. i regret not going this year i wouldve loved to meet you 😭😭
That bike is awesome!
I have 2003 KTM 200 mxc
Kincade, that unicycle scene had me thinking... But I need the training wheel in front of me!! So, with that said, I'll stick with my bicycle!!
Nothing wrong with being 95% underbiked!! Get out there and play...
My 06 also has the hole in the swing arm
Definitely entering !!! I love ktm 200s and I would like to have a chance to talk to one of my favorite you tubers
I also have a kawasaki kdx 200 what are the odds
I got it in the middle of the year and it rips i just struggle to get the right parts usually
I want a cr 125 giveaway build
It's scary for me that was 20 years ago.
Such a transformation on that bike I have a kx250 21 model that i attempt hard enduro on and i get some weird looks doing it on a 4 stroke but id love to have a 2 stroke to try enduro with
Props to the dj for the shock rebuild tunes low key 😂
That is a 2003-2007 IMS tank for RFS 4-stroke KTM. 250/400/450/525. You made it work though.
You should take the 600 to silver kings next year
19:23 THATS A FILTER finnally
Is there a reason why all your enduro bikes dont have an headlight?
That video reminded me to never work on my bike, so stressful, so expensive just bring it to the mechanic 😅
Cool to see you put the expensive screw ups in the video- happens to all of us!
Definitely a nice bike, had to put in an entry! Fingers crossed lol 🤞
Love this bike!!
I'm moving from Australia so I can win it! Hahah
30:34 Ive always used a rattle gun while holding the hub with a rag and never had issues. You have to know your rattle gun though.
Kincade why don’t you rebuild 4 strokes
Best thing you did, electric start. I am jealous.
It's time for a 300 2 stroke build so you'll have a proper bike for Silver Kings.
Bro knew what he was doing with the camera 😂
Brother just got a 200
You're making me question buying an 06 for $1k near me that needs a rebuild haha. I already own one that needs a rebuild, figured I may as well rebuild two at a time and have 2 of my favorite bikes in my garage.
Question where did you get that cool little clutch soaker/ holder thing the orange thing
@@moparman44069 it’s linked in the description! A follower reached out and sent it to me, they’re sweet!
thank you man
@@KincadePavich37:30 Hello, i like to have more info about what u have use to dont leak fuel and other things
great project
Wish I had forests like that to ride
love your videos i would even parcipate in the giveaways but im not from america and dont have the legal age.
Dang it! I missed this vid until today and I missed the window to enter.
@@ronconblack12 welcome to the channel, there will be more!
@KincadePavich oh I'm a long time lurker, but just realized I wasn't subbed! I really enjoy how thorough you are in your vids!
looking to add a fan on my 01 cr250 how do you like the fan you have
With this build I don’t think you bit the bullet. I think you ate the bullet.
43:52 gotta stop to rizz
Air Forks are not better than 2006 open chamber forks for enduro
I live in Laurel Montana
Hello where are getting sticker ?
Hey, I love your videos so much ,can you win this in Canada?
43:54 game is game
i have an 06 and it doesnt have the hole thats weird
well that made my butt pucker lol glad you didnt eat that huge side by side
Feel free to bless me with some spare parts lol got an 07. Rode it twice had to rebuild the suspension completely including having the bottom rear clicker drilled out and now needs a top and bottom rebuild. Only rode it for an hour 😅
I am South African can I enter? I had the same bike!!
Be cool of he did live stream for silver kings then an edited video
More unicycle content
you got a insane talint 😃
Just stick with the keihin carb,much better
prepararias una 49cc
God damn that thing looks so slow on camera
@@TraviNomotion 😂😂😂
Not the 200😢
It is a 2010
2006
is there any way i could pay you to build me a bike?
man the winner will be lucky i wloud try to enter but i cant cause im from slovakia im rideing a cr125 i think its a 1995 with kayaba forks that look like a 80s forks and a kx80 engine with a enduro sprocket and cant even work yet so im stuck with a booty bike that needs so much investments that its not even worth it i wloud be lucky if i cloud get a 1990s dt125r but they are still like 1 to 1.5k keep doing great content man hope you reach 200k soon
pin me in 50th veiw
Man you built a awesome bike and I love the build up I’m watching now so I’mhoping you d pick my name I’ve literally been trying for find a bike to fix cause I’m not really in a position to buy one and I’m really wanting to ride brother how many times can I enter lol
Oh no it just locked up I think I did same thing with a 350 Chevy bow tie life barring there were spun going to get a starter out of the problem cool pick Earl The Pearl Gilbert help me out thank you for the chance to win your in tune with life and people waiting for the call ha ha