very clean work. just one tip from one mechanic to another, those M177/LS1 engines (which are found in the c63/c63s) actually have two drain plugs. one is located at the very front of the upper oil pan, above the front engine cover which you took of last. you will get about 1 more liter of old oil out if you open this one as well. otherwise, great video:)
Thank you. I have changed the oil, air and fuel filters on my W204 thanks to your videos. However, this time I shall be filling to the middle of the dipstick, not to the top.
I really appreciate the attention to detail-Great job! I would not put the lower covers back on the car until I started with new oil and visually checked for any oil leaks.
Finally someone that knows how to do a CORRECT oil change. The only 3 things I do differently here in the states is: 1. I never touch the filtration element of the filter with my gloves. I just touch the base of the filter or the very top during installation. 2. I don't pull the filler cap until it's time to add oil. I just pull the dip stick out a bit to allow it to drain easier. Less likely for contaminates to fall off the towel covering it, etc.. and into the engine as the car goes up and down on the lift. 3. I pour the oil in right out of the bottle into that funnel. Those filler cans allow the possibility of dust and debris to get into the system.
So glad you’re back, please keep uploading these regularly maintenance videos. They really help me to relax and learn new things at the same time 😂 is the new A35 basically the same as last a45?
Great video! Nice work. I think there is a second oiltap in front. So the black plastic one you already changed en there is a metal ‘schraube’ in front.
hi i have a AMG A45 a nine years old car very low mileage only 1000km but the service center tell me i need to replace brake linings and brake disc anyone know is it necessary ? 🙏🙏
Could you tell me what is best when checking oil level, on warm operating temperature or cold engine? I have a C43amg, i have some issues understanding what MB considers to be accepted level. When operating temp i checked after 5 min, level is just below to 1/2 between Min and Max. After 20 min slightly above 1/2 Min and Max. After 2h is about 3/4 Min and Max. Cold engine, next morning, is 3/4 Min and Max. What is to follow cold or hot level? Because if you follow cold level and is little above Min, when going warm will be below Min, and if you make level close to Max when warm, when going cold will be above the Max.
Oh no. Say it isn't so? MB put the oil filter on the bottom? I have been servicing these since 2001 and never saw one on the bottom even going back to mid 90s. I am disgusted. This will suck on the ground. Great video BTW! Edit: Just did one today on the ground. It sucks because you will be dropping the middle and rear pan.
Könnte man die Abdeckungen von Dreck abspülen und die Schrauben mit Kupfer oder mit der Keramikpaste schmieren....auf die deutsche Straßen wird viel Salz verströht... Dafür/Ölwechselung wird minimum 200€ gefragt...
That is a surgically clean and perfect oil change. I would drive my car to this guy every time if I could. FANTASITC VIDEO.
Finally a new video!! Love the attention paid to small details. Makes the difference between a good or a normal mechanic!
I was going to make one but beat me to it haha
That’s the difference between a grease monkey and a professional!
very clean work. just one tip from one mechanic to another, those M177/LS1 engines (which are found in the c63/c63s) actually have two drain plugs. one is located at the very front of the upper oil pan, above the front engine cover which you took of last. you will get about 1 more liter of old oil out if you open this one as well. otherwise, great video:)
Doesn't that mean he overfilled the oil by 1L? he added 9, but took out 8?
So happy for comeback to share video for us ,good luck
Amazing video as always, the attention to details is wonderful
Thank you. I have changed the oil, air and fuel filters on my W204 thanks to your videos. However, this time I shall be filling to the middle of the dipstick, not to the top.
I really appreciate the attention to detail-Great job! I would not put the lower covers back on the car until I started with new oil and visually checked for any oil leaks.
Great video mate, love the mechanical work
Thank you for sharing another quality video, Excellent.
the whole time i would have a big smile on my face while doing service on amg vehicles 😊 those are magnificent masterpieces from amg. Truly🥰
Oil filter under the engine... even such easy job as engine oil change is so complicated on the newer Mercedes cars...
Thank you for the video :)
Wait until someone tries the crankcase ventilation valve on the M274. It's too much fun.
@@marcsmith3881 😉
Deine Videos entspannen einfach. Perfekt wenn man nicht zur Ruhe kommt. Grüße!
Freut mich zu hören! :)
Good to see that you are alive ^^
Welcome back 🤠
Wellcome back !!! 👍👍👍
Bro ohne Scheiss ich liebe deine Videos. Fahre zwar nen Golf an dem ich auch alles selber mach aber deine Videos sind ja mal wirklich mega😍
Hi, great video!!! i hope you post more videos like that, and some repairs awso!
Fantastic! I wish my Dad would have taught me, I wish I had that set up, I wish I had that expertise, I wish I had that ethic of excellence.
what a perfect change of oil 😀👋👋
It’s been long time. Finally bro
Wow, finally you came back. Been a while tho
Professional work, what else to say.
9:44 Fail :D, nice Video bro very clean Work
Servus Andreas.
Ein neues Video von dir 🔧👍🔧😁
Beste Grüße von
Michael
Thank you sir for beautiful video
Finally someone that knows how to do a CORRECT oil change.
The only 3 things I do differently here in the states is:
1. I never touch the filtration element of the filter with my gloves. I just touch the base of the filter or the very top during installation.
2. I don't pull the filler cap until it's time to add oil. I just pull the dip stick out a bit to allow it to drain easier. Less likely for contaminates to fall off the towel covering it, etc.. and into the engine as the car goes up and down on the lift.
3. I pour the oil in right out of the bottle into that funnel. Those filler cans allow the possibility of dust and debris to get into the system.
Have you actually done a oil change on any car lol?
what if the filler cap won't come off and you drained the oil?
@MowerModdin Then you get another car because if someone was stupid enough to over tighten it, you don't want that poorly maintained car anyway.
So glad you’re back, please keep uploading these regularly maintenance videos. They really help me to relax and learn new things at the same time 😂 is the new A35 basically the same as last a45?
Thank you. No the A35 and old A45 have different engines, gearboxes and 4matic systems.
Wonderful from France !!
Professional 🤌
I have w205 2015 C63s. Should I go 9L 5w-40 or 0w-40 (Great video btw)
Hi! I recently purchased E63s 2018 with M177 engine. 5w40 or 0w40 engine oil ?
Should I used the extration method?
What kind of oil ?
Great video! Nice work. I think there is a second oiltap in front. So the black plastic one you already changed en there is a metal ‘schraube’ in front.
Yes there is!
Yes, thats true. But arccording to the instruction of the oil change this "Schraube" is not removed.
Thanks for sharing 😀
Hi Andreas could you help with a question ? Pls
hi i have a AMG A45 a nine years old car very low mileage only 1000km but the service center tell me i need to replace brake linings and brake disc anyone know is it necessary ? 🙏🙏
My God bro, it takes 5 months for a new video ?, please upload more videos like this.
Buen mecánico saludos
Make video for Waterpump m133 pls
Great video. My engine is also Made by Julian Kappert!!
Great video !!!! I need a lift lol
Bravooo!!!!
how can i send you an e-mail I will ask you a question about amg
Sehr schön! Endlich wieder ein Video von dir. Hat der M177 keine zweite Ablassschraube am Öl-Kühler?
Danke Dir. Nein, Öl wird rein über die Ablassschraube abgelassen.
Unintentional ASMR
Super Video. Hab nur eine Frage: sollte man nicht die Dichtung vom Ölfilterdeckel leicht mit Öl benetzen?
10:45 😂
@@KatusLPAh, danke! Hab ich wahrscheinlich übersehen.
hey great video! what do you use to spray down areas/parts that have been covered with oil? seems very handy
Hi and thank you. I use brake cleaner. Its perfect to remove engine oil.
@@WaveCeptor22 Thank you for the reply :D
6:46 What size socket for the oil filter cap removal?
24mm
2:27 the blue container looks like it came from Beretta.
What did you use for cleaning in that sprayer?
Its brake cleaner
Could you tell me what is best when checking oil level, on warm operating temperature or cold engine?
I have a C43amg, i have some issues understanding what MB considers to be accepted level.
When operating temp i checked after 5 min, level is just below to 1/2 between Min and Max.
After 20 min slightly above 1/2 Min and Max.
After 2h is about 3/4 Min and Max.
Cold engine, next morning, is 3/4 Min and Max.
What is to follow cold or hot level?
Because if you follow cold level and is little above Min, when going warm will be below Min, and if you make level close to Max when warm, when going cold will be above the Max.
@@WaveCeptor22 can you help?
@@ailie234 Normally, the oil level is checked when the engine is at operating temperature after the engine has been off for 5 minutes.
What about draining the oil cooler?
That's not necessary.
Alte oder neue Ablassschraube?
Ablassschraube wird immer neu gemacht.
Oh no. Say it isn't so? MB put the oil filter on the bottom? I have been servicing these since 2001 and never saw one on the bottom even going back to mid 90s. I am disgusted. This will suck on the ground. Great video BTW!
Edit: Just did one today on the ground. It sucks because you will be dropping the middle and rear pan.
Not to mention plastic oil pan
Wow there is no space in the engine bay. I got used to only OM651 beeing in there hehe
The front end of the car had to be extended by 5 cm to accommodate the V8 engine xD
@@WaveCeptor22 Yeah i can imadgine the pain of the engineres when they realised it wont fit, but still its a beast
Schade nur das du eine Schraube vergessen hast zum Öl ablassen
Naja "vergessen" habe ich sie nicht. Ja sie ist da aber bei einem Ölwechsel wird sie laut Herstelleranleitung nicht herausgeschraubt.
Nice video! Engine oil brand?
We are using Shell Helix Ultra engine oil.
@WaveCeptor22 did you use 5-30 or 5-40. I heard w205 C63s amg takes 5-30 but else where some are saying 5-40. thanks
@@Isaac-pm1pxNein, ein M177 braucht definitiv ein 0w40 oder 5w40, niemals ein w30
Mercedes-Benz ㉦❤️ᄉ
Did you buy a new car?
No, I still have my A45 AMG.
@@WaveCeptor22 good to hear, the A45 is a little monster😈
Könnte man die Abdeckungen von Dreck abspülen und die Schrauben mit Kupfer oder mit der Keramikpaste schmieren....auf die deutsche Straßen wird viel Salz verströht...
Dafür/Ölwechselung wird minimum 200€ gefragt...
That’s a lot of engine oil 😅
Promo`SM 🤣
Plastic drain plug 👎 at least the 5.5 had aluminum