FlySky Voltage Sensor User Review
HTML-код
- Опубликовано: 8 окт 2024
- Purchase Link:
www.banggood.c...
-------------------------------------------------------------------
It's a very useful product for all RC lover because it helps you to monitor your battery status. By which you can calculate how much flight time or play time is left. And you also set an alarm for low voltage in your transmitter.
--------------------------------------------------------------------
Please SUBSCRIBE my channel
/ makerhand
-------------------------------------------------------------------- 
Наука
If you plug into only one cell on your LIPO. Ground (black) and the wire next to it, you can then go into RX battery setting and set a audible alarm in the external sensor field. You can set low voltage, high voltage and alarm. That way you do not need to look at the TX display. Works with the FS-i6x and both FS-iA6b and FS-iA10b
that battery tho.. about to explode
I'm new to rc planes how do you know it's going to explode?
Great Review , exactly what I was searching for :-) Thanks for sharing.
Hello ! Great vid. I conect oposite voltage baterry to my fs ia6 receiver AND saw smoke... any ideas for the repair
Technically you can, but it will cost you the same as the new one, so my suggestion is to go for a new one.
@@MakerHand thanks
The video was really good... Could you please tell me if the iA10b is compatible with the i6x transmitter as well or not? Thanks! :)
Yes, iA10B is compatible with the i6x transmitter.
Hi Maker hand: Your video is really helpful. I ordered on of them. This was the biggest problem i was facing. But can you please shiw us the best and chipest method to get rssi. Lot of time i am afraid about remote range. is there any easy method to get rssi. i have radio flysk fs i6. thank you
In i6 there is a "ERROE % " in the display you can fly upto 80% of error according to my experience. But the problem is if you use any sensor like voltage, temp, speed etc then you wouldn't get the "ERROR %"
@@MakerHand do I have to do any upgrades for the telemetry I got the sensor in video. Or is it included in the update to 10ch and timer and rssi in another video. Didn't kno if it was all 1 upgrade or will it just pop up when turned on
@@Reecefpv don't need any upgrade
Nice review, thanks. I have a couple of these they are very good. What is the other socket on the sensor for, what does it connect to?
to connect another sensor
@@MakerHand 2 voltage sensors connected together?
@@speckledjim_ yes
@@speckledjim_ for a parallel setup like i run two 1500 100c packs on my trainstar ascent. because it was the cheapest high c rating route to go and also because that plane is very nose light. so having 2 sensors would be sweet AF
What are the other 2 wires for? (Extra wires that come with the module?
You can calibrate your telemetry module voltage reading to show the actual value. Yours is 0.3v off
I have got fs-i6x transmitter and i have battery 14.8volt why transimitter show me only 5volt?
Cuz it shows u the voltage supplied to the 5v coming from the BEC to the 5v rail of the receiver. If you want to see your battery voltage, you will need a battery voltage telemetry module. You can also mod ur receiver to show battery voltage without buying a seperate module but its a little tricky and risky
Thanks for the reply, I've been wondering the same thing! 😊@@yaimem
I just order the voltage sensor. Thank you sir!
welcome
I trust the sensor more than the ultra low cost DMM
Sir fs-R6b k lie kon sa voltage telementry module ata h
Unfortunately isme koi v telemetry supprot nahi ha.
Thanks. Just what I nerder😊
What parameters to set on the transmitter for the 11.1V battery? How much for low, high and for alarm? The alarm rings even at full battery.
You just can't set it higher then 10volt. Need firmware update
Bhai aapne to kamal kar dia
Thank youuuu...
I use my batterie's balance plug to power my fpv system. Can this still be used in some way?
Yes jus use a Y connector
@@MakerHand Oh duh! Thanks lol
Mere pas x6b hai... Uska battery port ka gnd and red wala directly battery me dal sakta???
yes
X6b me direct 12 dene se kharab nai hoga??
Does this work without modding the Software of the Transmitter?
Yes
@@MakerHand Nice, and thanks for the answer
Is there an alarm on it?
NO
Bro i have fs IA 10 A receiver. How do i connect ?
If it have a sensor port then you can connect it
thanks sir could you please put a video for altitude sensor for flysky radio is vario available and it compatible with flysky in radio for telementry
Using a GPS and FC will be more reliable
+MakerHand is GPS facility flysky i6 radio?
no
+MakerHand thanks so much sir so HELPFUL I know KHALIN Mohan in Chandigarh he taught me how to laminate thermocol that he learned from your videos.Tranis radio is very good qx7
Awesome
Flysky Voltage sensor can be used with 24vdc batteries
How to buy sky fs i6 please tell me as soon as possible
Please make sure you choose 'India Direct Mail' as shipping method
Bhai iski range kitne metre he??
A to aapki receiver se connected hoga so aapka receiver ka range jitna hoga ohi iska range ha. Joki lagvag 950 meter ha.
MakerHand ruclips.net/video/HTPRwnqg4Io/видео.html
Maker hand please watch the vdo.i want to buy transmitter and receiver...i,m thinkg to buy transmitter nd reciever..thats why i,m confused...which one to buy flysky or avionic?? suggest me
This is the best transmitter you can get. If you buy this, then choose shipping method as " Direct ship to INDIA" in this method you will not get stuck in customs. And buy (Mode2 left hand Throttle)www.banggood.com/Flysky-FS-i6X-2_4GHz-10CH-AFHDS-2A-RC-Transmitter-With-X6B-i-BUS-Receiver-p-1090406.html?p=6805044548439201605Q
Direct ship to india is not available...bhai tell me how to skip custom duty...
name some sensor which I use in this receiver…please sir reply fast
wind,speed, rpm, temperature
Show !!!!!!!!!!!!
Nice video 👌🏻👌🏻
holy shit.. thats the puffiest battery i have EVER seen.. you need to throw that away asap dude.. that thing is gonna explode any minute now.. and destroy your RC or burn your house down.. wow..
i know this is an older video so hopefully you got a new battery by now.
Makerhand i m not able to get your point of shipping method...there is only 3 methods available...1.AIR PARCEL REGITER(FREE)
2.EMS EXPRESS MAIL SERVICE(Rs460)
3. Expedited shipping service(Rs1476)
You can buy this through AIR PARCEL REGITER with tracking number
How to use this in rs i6 receiver
You need i6B receiver
The joke is you don't need that voltage sensor you can mod the receiver in 2 min to do the same thing
How
You are 100% r8 but after doing the mod i'm getting heating issue of the receiver and also it's decreasing the range little bit. Is it normal??? Any one have any idea ?? plz inform me.
Your battery is blown and unstable. Needs destroying.
It is asc it is esc
Why would we like you ahhhhhh
It is not sarvo it is servo
reply me fast sir…please sir its important
I already replied you
wind,speed, rpm, temperature
@@MakerHand sorry for late reply…
only 4 types of sensor
@@MakerHand sorry for asking again and again…
I ask u this question again and again because my phone not showing ur reply
@@MakerHand reply me sir only 4 type of sensor
Yes