@@baltasaur77 I'm not running map 6 yet. Just trying to find the good params to start with. Also curious, do you know if 94 Octane with 10% ethanol would be better than pure 91 Octane?
@@jz1607 when I was running map 6 I never went past 7 peak psi, and if you’re runnning anything over 4 psi you get way better results using a mix, I always used 91+E85 mix, 6 gallons of E85 and the rest 91
@@baltasaur77 Thanks a lot for your answers. It seems getting E85 is gonna be a hassle here in Montreal. Sticking with 91, do you have a MAP 6 configuration that you used? (Without E85 mix).
I think you should have very clearly specified that you are doing this on a SS. Last thing you want is some RS owner adding 9.0 PSI. Also, it would have been helpful if you included a recommended Map 6 for us RS owners.
OMG you need to learn about afr dude. It went supper lean under boost it will be pulling crazy timing to protect that motor especially on small turbos! Good luck with that!
@crescent fallen 11.5-12.5 would be the range I would try to keep it in. Every different type of engine/fuel system has a best afr to make power but I would be on the safe side no mater what!
I been running map 7 since i got the jb4 installed yesterday and it has been running great on a 2018 3.0t silversport. I need help with map 6 and would even pay someone if they help me after I log.
Hey man, how was in the install on this bluetooth app for the JB4? Pretty straight forward? I definitely want to go this route on my 18 Q60 rather than just the Stage 1.
I recently purchased mine. When I connect to it, my RPMS, AFR, GEAR, IGN, IAT gauges don’t move. I guess it’s not reading them. Any ideas how to fix that? Thanks.
So map 7 is pretty safe then? I'm running a mix of about 5-6 gallons of e85 the rest 93 I haven't had any issues yet been running it for about 4 or 5 months already haha
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
When I take my foot off the gas my AFR goes up to 25 is that normal?
Yes you're good bro
What are the best map 6 settings if Im running straight 91? All I have are intakes. Don’t have 93 anywhere near me
did you get any response?
I'm running 91 Octane, bone stock and not sure what to put for Map 6 (Not RS)
@@jz1607 what’s your map 6 set up?
@@baltasaur77 I'm not running map 6 yet. Just trying to find the good params to start with.
Also curious, do you know if 94 Octane with 10% ethanol would be better than pure 91 Octane?
@@jz1607 when I was running map 6 I never went past 7 peak psi, and if you’re runnning anything over 4 psi you get way better results using a mix, I always used 91+E85 mix, 6 gallons of E85 and the rest 91
@@baltasaur77 Thanks a lot for your answers. It seems getting E85 is gonna be a hassle here in Montreal. Sticking with 91, do you have a MAP 6 configuration that you used? (Without E85 mix).
You mentioned in the video about the car potentially running richer & build ups in the catalytic converters, what if I have catless downpipes?
I think you should have very clearly specified that you are doing this on a SS. Last thing you want is some RS owner adding 9.0 PSI. Also, it would have been helpful if you included a recommended Map 6 for us RS owners.
I am going to update this video 1 do appreciate you
you kinda didnt explain when ur finished datalogging what u leave ur setup as
OMG you need to learn about afr dude. It went supper lean under boost it will be pulling crazy timing to protect that motor especially on small turbos! Good luck with that!
@crescent fallen 11.5-12.5 would be the range I would try to keep it in. Every different type of engine/fuel system has a best afr to make power but I would be on the safe side no mater what!
Can't wait to see the Dyno
Are the Map already preset from factory or do you have to create the profiles ?nay the way appreciate the time you put in for educating..
What map can I use without mapping, seems to complicated to worry about, thanks Jim
Omg!! You just made things even more confusing! I’m getting a headache!
Does anyone know what website he's talking about at the end? Can't quite understand and I've tried different ways of spelling it with no luck.
You had a heat exchanger at this time correct?
update: Z1 ran 27lbs of boost with stock turbos
They are full e85 so I'm guessing the turbo isnt getting as hot as it would with 91 or 93
What 1/4 mile time can you get using this map 6 on a stock car?
Mid 12s
@@BoostInMotion not bad. What about with intakes, HX and downpipes
broo thank youu for this video man
I been running map 7 since i got the jb4 installed yesterday and it has been running great on a 2018 3.0t silversport. I need help with map 6 and would even pay someone if they help me after I log.
are you running an e85 mix or 91?
@@andrewramirez8623 if i fill up 93, can I run map 7 safely stock?
yea with that boost what fuel are you running with?
My afr is 14.6 but is it normal for it to be putting 0.3 psi while idling?
Yup
Hey man, how was in the install on this bluetooth app for the JB4? Pretty straight forward? I definitely want to go this route on my 18 Q60 rather than just the Stage 1.
install was super easy including the app you download. results were better than my expectations.
would you still run these settings on map 6 for a Q50 Premium
Did you ever get an answer?
What’s the tune for 400hp RS? What map settings? 1,2... etc
what kind of fuel and what about the timing
I recently purchased mine. When I connect to it, my RPMS, AFR, GEAR, IGN, IAT gauges don’t move. I guess it’s not reading them. Any ideas how to fix that? Thanks.
same here, does that mean the jb4 boost isn’t working?? if you found a fix let me know
@@ahmadalsheikh4236 I’ve legit been having that issue but my boosts still kick in amazingly but I still want all my gadgets to work
You need to connect the ob2 data cable to the jb4 and the obd2 port then connect via bluetooth and there that's it.
So map 7 is pretty safe then? I'm running a mix of about 5-6 gallons of e85 the rest 93 I haven't had any issues yet been running it for about 4 or 5 months already haha
SS or RS
@@BoostInMotion SS
Oh yeah that's fine if you're running E85 map7 is perfectly good
@Boost In Motion is it safe to run map 7 on straight 93. I have a luxe 3.0t.
@@dixitamin2852 did you find out? i want to run map 7 on 93 also
Are you still running this psi set up?
What’s your best 0-60 on JB4?
Love the vids! 1 Thing please stop with the candy. That is horrific through the speakers.
What mods did you have on this ?
stock at this time
How often should u data log?
When it starts getting very hot outside
Stock internals ?
Yes with cars make 500whp on e85 stock block/turbos and internals
Boost In Motion what mods you on with jb4
Right now ams intakes and Jb4.
Boost In Motion what’s next and how much hp you expect once down piped ?
Funny that I’m listening to this and you didn’t even have 500 subscribers yet
Hey men that map is better for my Q50 lexu 2018 just jb4
luis miguel mercado wat map did u end up running
Do you run map 6 on pump 93?
Yes you can run maps six on 93 pump is perfectly fine just data log in and make sure everything is within parameters
you are going to bloooooow that engine, no wander you sold it
What map do you run?? And what bolts on you got??
I run map 6 at 3500-5000 I run +7 psi, also I got a y Y-Pipe back exhaust and downpipes
G0t2BMiiRii currently running map 6. Im stock for now.
G0t2BMiiRii I'm running +9 from 2.5k -6.0k
I'm data logging. Afr is around 12.5- 13.5. Timing looks good also
Boost In Motion your mixing it with E85 most likely right???
G0t2BMiiRii I have no e85 station. Near me so I've been data logging to make sure I'm safe
Does jb4 work on 3.7 ?