My fan seems to be working when I turn the ac on, but when it's off the fan works intermittently, module bad, haven't tested yet but i'm pretty sure that is the culprit as i hard wired the fan wires after melting the ground connector awhile back. Great video
I don't like the way GM has ran its wiring to the starter solenoid. So i ran heavier gauge wire to the starter, alternator, and under hood fuse box. This puts less strain on the electrical system. i also heat wrapped the starter and its wiring. The heavy red wire is for my stereo system. I also added heavier grounds. And a extra ground to the frame. Thanks for watching!
I knows the fan on my Corvette wasn't running so I take it to the garage a sensor was defective so it wouldn't allow the fan to turn on and cool down the motor
my ac stopped working. it blows hot air i've noticed the button beside the auto comes on when i turn the dials ac on...i think that's not supposed to turn on the one with the car and arrow on it but at night the ac doesnt blow hot air and that light doesn't turn on only in day time...got a few things i'm gonna check today hopefully it's a quick and easy fix and no something i need to take to a shop with all this quarantine going on
I have C5 can you gimme Litle boost where is this fan controller located on this car 🚗 to trying to clean up a code P0418 that’s making the check engine light 💡 came out....
I made them out of 10 gauge wire and 10 gauge crimp terminals. You can buy these at most auto parts stores in the electrical section. Take a screen shot of the jumpers to get the right connectors. Thanks for watching!
If the fan motor is good and the switch is good, then what? My C6 fan had stopped working and car was about to over heat so i stopped driving it for a while. Last week decided to pull it out after sitting a while, fan came on finally but at over 200 degrees. Stayed on for a little while and stopped again.
I'm going to do the test now I've had this problem twice now and yesterday night I didnt notice it climb up and hit 250 atleast it was a cold night so once I hoped on the highway it stayed at 220 all the way home they should really make the fans simpler or atleast put a manual switch somewhere 🤦♂️
I have this problem with my z..this was the most informative video I have seen. Now I know what to check.
great information perfectly explained. i was wondering how to bypass that box very useful thanks
I've watched numerous amounts of useless videos, Thanx 4 getting straight to the point! This is a good starting point for my heating issue.
My fan seems to be working when I turn the ac on, but when it's off the fan works intermittently, module bad, haven't tested yet but i'm pretty sure that is the culprit as i hard wired the fan wires after melting the ground connector awhile back. Great video
This saved me the price of buying a new module. HUGE thanks for your help!!
right to the point . excellent video and thank you . yes very helpful
well done body tht really helps during emergency... thanks
You're welcome! thanks for watching.
Thanks for the excellent advice. I was able to determine that my fan motor and fan controller are good.
Thats how to make a helpful vid.
LIKED
Thanks for the tip, good to know
Very good information. Could you please explain the extra wiring attached to the battery. Thanks Bob
R & J Restoration Station pretty sure they’re just cables going to aftermarket speakers
I don't like the way GM has ran its wiring to the starter solenoid. So i ran heavier gauge wire to the starter, alternator, and under hood fuse box. This puts less strain on the electrical system. i also heat wrapped the starter and its wiring. The heavy red wire is for my stereo system. I also added heavier grounds. And a extra ground to the frame. Thanks for watching!
Thank you
thank you for the good info, it really helps
You're welcome! thanks for watching
Is 12 gauge wire okay?
Appreciate the info.
Cool stuff, thank you
I knows the fan on my Corvette wasn't running so I take it to the garage a sensor was defective so it wouldn't allow the fan to turn on and cool down the motor
my ac stopped working. it blows hot air i've noticed the button beside the auto comes on when i turn the dials ac on...i think that's not supposed to turn on the one with the car and arrow on it but at night the ac doesnt blow hot air and that light doesn't turn on only in day time...got a few things i'm gonna check today hopefully it's a quick and easy fix and no something i need to take to a shop with all this quarantine going on
Have you checked the connection from the module to the fan motor? Those plugs go bad.
Good video!
I have C5 can you gimme Litle boost where is this fan controller located on this car 🚗 to trying to clean up a code P0418 that’s making the check engine light 💡 came out....
Where can I get these jumpers
I made them out of 10 gauge wire and 10 gauge crimp terminals. You can buy these at most auto parts stores in the electrical section. Take a screen shot of the jumpers to get the right connectors. Thanks for watching!
doesnt your fan come on after a certain temp?
If the fan motor is good and the switch is good, then what? My C6 fan had stopped working and car was about to over heat so i stopped driving it for a while. Last week decided to pull it out after sitting a while, fan came on finally but at over 200 degrees. Stayed on for a little while and stopped again.
Mine is doing this but the fan still turns on
I'm going to do the test now I've had this problem twice now and yesterday night I didnt notice it climb up and hit 250 atleast it was a cold night so once I hoped on the highway it stayed at 220 all the way home they should really make the fans simpler or atleast put a manual switch somewhere 🤦♂️
Driftprodigy01 did you find a solution to your problem ?
@@SixFo-qc5ui not sure what happened it was the fan control module I guess got wet not sure tho since it did do it twice