Toyota RAV4 (2019-2024): How To Adjust Headlights (Low Beam) And Fog Lights.

Поделиться
HTML-код
  • Опубликовано: 13 сен 2024
  • In this video, we will show how to adjust headlights (low beam) and fog lights in the 2019, 2020, 2021, 2022, 2023, and 2024 Toyota RAV4.
    If your headlights are not properly adjusted in your Toyota RAV4 they can blind other drivers or make it harder for you to see distant objects.
    RECOMMENDED TOOLS:
    1. PHILLIPS HEAD SCREWDRIVER - Klein Tools 603-4 Screwdriver - amzn.to/3kFGex0.
    2. SOCKET SET, RATCHET - GEARWRENCH 57 Pc. 3/8" Drive 6 Pt. Mechanics Tool Set, Standard & Deep, SAE/Metric - amzn.to/41wE6Z3.
    Toyota RAV4 (2019-2024): DIY Playlist - • Toyota RAV4 (2019-2024... .
    Thank you for watching! Please support us by liking the video and subscribing to the channel!
    You can also buy us a coffee! :) - www.paypal.com....
    DISCLAIMER: All information displayed in the video is for entertainment and informational purposes only. You can't treat it as professional advice. Should you decide to act upon any information in this video, you do so at your own risk. When you click on links to various merchants on this site and make a purchase, this can result in this site earning a small commission. Affiliate programs and affiliations include, but are not limited to, the Amazon Associates Program.
    #MorozovAutomotive #2019RAV4 #2020RAV4 #2021RAV4 #2022RAV4 #2023RAV4 #2024RAV4

Комментарии • 46

  • @MorozovAutomotive
    @MorozovAutomotive  4 года назад +2

    RECOMMENDED TOOLS:
    1. PHILLIPS HEAD SCREWDRIVER - Klein Tools 603-4 Screwdriver - amzn.to/3kFGex0.
    2. SOCKET SET, RATCHET - GEARWRENCH 57 Pc. 3/8" Drive 6 Pt. Mechanics Tool Set, Standard & Deep, SAE/Metric - amzn.to/41wE6Z3.
    Watch How To Replace Fog Light Halogen Bulbs With LEDs in 2019 Toyota RAV4 Adventure/Trail - ruclips.net/video/pXHvTmfxyNg/видео.html.

    • @cici9645
      @cici9645 4 года назад

      Thanks for your videos, the fog light of my toyota rav4 2019 does not work after replace it by Halogen, what can I do to fix it

  • @frankcastle5993
    @frankcastle5993 4 года назад +10

    Thank you! I was looking for this for a long time! My right side low beam is too low, sometimes can't see 50 meters away. It makes me feels danger while driving at night. Now I can adjust it!

  • @TRF_U
    @TRF_U 3 года назад +4

    Now finally I can set up my headlights down so I don't shine into the eyes of other drivers ... I'm kind of disappointed, that my 2000's Ford Focus had this adjustment electric. Thank you! :)

  • @paulx7620
    @paulx7620 2 года назад +6

    This is great. I've been getting flashed for the last 3 years, hopefully this will help. I just figured it was because leds looked wierd to people.

  • @JJFLD
    @JJFLD 4 года назад +12

    I adjusted the headlights up higher and WOW, huge difference! They actually light up the road really far down now!

    • @2k_
      @2k_ Год назад +1

      Yeah it makes a big difference. I made them higher too and the visibility is amazing

    • @robs9324
      @robs9324 Год назад

      Did you turn the adjuster clockwise to raise the lights?

    • @JJFLD
      @JJFLD Год назад

      @@robs9324 I don’t remember unfortunately. Just screw one way or another and you should be fine.

    • @alanf5351
      @alanf5351 Год назад

      @@robs9324if using Philips screwdriver, turn handle clockwise to raise light. If using socket wrench, then counterclockwise to raise light beam

  • @johsiv8530
    @johsiv8530 3 года назад +2

    My RAV4 Prime -21 had plastic 8mm for the adjustment. The right lamp was not accessible due to all pipes with any thing els then a long screwdriver. Thanx for a nice video!

  • @allenn7955
    @allenn7955 9 месяцев назад +1

    Thank you for this video!

  • @TheLazyHangman
    @TheLazyHangman Год назад +1

    I can't believe my shitty 2009 Fiat Grande Punto had a switch for this on the cockpit and today you have to do it manually

  • @bwd1963
    @bwd1963 2 года назад +2

    Thanks for the tip

  • @bhileshwartrilochun1062
    @bhileshwartrilochun1062 4 года назад +2

    Great video. Thank you!

  • @tomtang
    @tomtang Год назад +3

    謝謝!

  • @zeliop6024
    @zeliop6024 Месяц назад

    I like how you mentioned not to adjust to high or it will blind other driver, Now take that advice and ask why trucks which are higher blind the lower car drivers?

  • @NGH51
    @NGH51 3 года назад +2

    Thank you

  • @robs9324
    @robs9324 Год назад

    Do you turn the adjuster clockwise to raise the light?

  • @TheSafariHunter
    @TheSafariHunter 3 года назад

    For a moment I thought that the review was about 2000 model when headlights beam were adjusted by screws while nowadays most of car makers started extensively to use matrix headlights.

  • @Colonel_Mark
    @Colonel_Mark 6 месяцев назад

    Hello, i have a 23 R4H. At 3 meters away, how many inches should it be lower, 3"?

  • @plyallstar
    @plyallstar 4 года назад +2

    another great video. Can you make a video on how to change the license plate light? I like the fact that it's already a white, led light from the factory, but its a little dim for my taste. I would love to change the bulb to something a bit brighter.

  • @cereprepus6106
    @cereprepus6106 4 года назад +2

    спасибо за видео! Скажите пожалуйста, можно ли отключить дневные ходовые огни?

    • @MorozovAutomotive
      @MorozovAutomotive  4 года назад

      Размыкание цепи ДХО отправит ошибку в бортовой компьютер. Можно обмануть компьютер подключением эквивалентной нагрузки (резистор вместо лампы ДХО).

  • @kurthelm4417
    @kurthelm4417 2 года назад

    How do you adjust the horizontal headlight and fog light beams? On the headlight, it appears the horizontal adjustment screw(?) is under a rubber cover at the very outside end of the headlight, requiring moving the fuse box on the left headlight, and the washer tank on the right side. Is that it? My left headlight is aimed too far to the right.
    I am not sure where the horizontal adjustment is for the fog lights. I will have to investigate, as I did not look too hard when I replaced my fog lights with LED yellow lights. My XLE required change out through the wheel well by removing a couple of snaps and pulling the liner out of the way to access the light assembly. Pretty easy job really, and to adjust the fog light I will also have to access the light from the wheel well.

  • @Andrii-rides-and-swims
    @Andrii-rides-and-swims 4 года назад +2

    Подскажите, не совсем понял, почему свет должен быть ниже ленты (точки) на стене?

    • @MorozovAutomotive
      @MorozovAutomotive  4 года назад +1

      Свет должен быть ниже для того, чтобы достаточное количество света попадало на дорогу перед Вами, и для того, чтобы не слепить встречных водителей.

    • @Andrii-rides-and-swims
      @Andrii-rides-and-swims 4 года назад

      @@MorozovAutomotive Спасибо

  • @fadimalouf1236
    @fadimalouf1236 4 года назад

    Can I ask you if there is more than one fuse responsible for the left headlight? It stopped suddenly and I don't know which fuse is responsible

  • @seancheang1910
    @seancheang1910 3 года назад

    How to disassemble the headlamp

  • @sherweezy408
    @sherweezy408 2 года назад

    Are the LED headlight bulbs replaceable/serviceable? If my headlights go out, do I have to replace the whole headlight assembly?

    • @MorozovAutomotive
      @MorozovAutomotive  2 года назад

      I believe you will need to replace the whole assembly.

  • @buldozerovich
    @buldozerovich 4 года назад

    если я правильно понял указатели в процентах наклееные на корпусах фар, то проще делать по ним, на моей машине сейчас 1%, то есть это - 10 см от центра фары на расстоянии в 10 метров от стены к примеру ну или 1 см в 1м от источника света, на раве не смотрел, только вчера пригнали, но светят фары почти под бампер, очень неудобно. Хотя официальный дилер уверял что все выставлено как надо. Буду колупать чуть позже

  • @NikolayOPK
    @NikolayOPK 4 года назад

    Добрый день. Дополнительные ДХО -LED потребление 200 ма. Не подскажите куда тогда их лучше подключить. Выдергиваю верхний небольшой разъем от фары штатные ДХО горят. Что запитывает этот разъем на фаре? К нижнему разъему подходит большой разъем с толстым жгутом. Не хотелось бы его тормошить может есть еще какое нибудь место где можно. Еще подскажите пожалуйста при включение ДХО в светлое время суток-задние габариты должны гореть?

  • @danakresic4114
    @danakresic4114 3 года назад

    How do u replace headlight on 2021?

  • @alikalik5528
    @alikalik5528 4 года назад +1

    Добрый день. Пожалуйста переведите это видео для русскоязычных. Заранее благодарен

  • @JaspreetSingh-ew8ek
    @JaspreetSingh-ew8ek 2 года назад

    how to deal with high beam because its really bad in 2022

  • @NikolayOPK
    @NikolayOPK 4 года назад +1

    Спасибо очень оперативно. Только спросил у вас про снятие заднего бампера. Тут же появилось видео. Подскажите пожалуйста, я подключил дополнительные ДХО к верхнему разъему фары. Как включаешь зажигания сразу они зажигаются. Тут недавно обнаружил , что при дистанционном запуске двигателя загораются только мои дополнительные ДХО, а штатные не горят. Может не туда подключил ДХО. Подскажите куда их лучше подключить ,что бы работали как штатные? Нижний разъем у фары так капитально замотан (заизолирован) даже не знаю ка к нему подлезть. Может есть схема ДХО где можно правильно подключиться. У меня полная комплектация Престиж SAFETY. Заранее большое спасибо.

    • @MorozovAutomotive
      @MorozovAutomotive  4 года назад

      Судя по вашему описанию, сейчас Ваше ДХО подключены к accessory (12 вольт при включении зажигания) и не видят реальный сигнал от ламп ДХО. Для того чтобы дополнительные ДХО и штатные ДХО работали синхронно, доп. ДХО нужно подключать параллельно штатным. Лучшая зона для подключения - участок провода непосредственно перед входом в штатную лампу ДХО. В этом случае нагрузка на этот участок цепи сумируется (увеличивается на мощность подключаемой лампы). Поэтому подключаемая дополнительная лампа не должна быть слишком мощной, желательно LED. Иначе сгорит предохранитель этого участка цепи.

    • @NikolayOPK
      @NikolayOPK 4 года назад

      Добрый день. Дополнительные ДХО -LED потребление 200 ма. Не подскажите куда тогда их лучше подключить. Выдергиваю верхний небольшой разъем от фары штатные ДХО горят. Что запитывает этот разъем на фаре? К нижнему разъему подходит большой разъем с толстым жгутом. Не хотелось бы его тормошить может есть еще какое нибудь место где можно подключиться. Еще подскажите пожалуйста при включение ДХО в светлое время суток-задние габариты должны гореть?

  • @geneklosinski348
    @geneklosinski348 4 года назад

    For lowering fog lights- WHAT do you do with the screwdriveR??? Just push it? Don't get it!

    • @MorozovAutomotive
      @MorozovAutomotive  4 года назад +1

      The screwdriver has to be long enough to reach the adjustment mechanism. Then you turn it left or right to adjust the height of the light beam. You can also use 10mm socket to perform the same task. It is shown in the video as well at 0:25.

  • @password9384
    @password9384 2 года назад

    what about fog lights??????