Parts & Funtctions of Varmax Sewing Machine with Extension Table Part 2

Поделиться
HTML-код
  • Опубликовано: 9 янв 2025

Комментарии • 82

  • @donaldsunny7836
    @donaldsunny7836 3 года назад +1

    A million THANK YOU's from London, England, UK!!! This is one of the best and helpful videos I've ever seen. If there was an award for helpful instruction videos, this should win it. I bought this machine and it came with instructions which you probably need a science degree to understand. This video is so simple and easy to understand. I became an expert in under 20 minutes. Thank you a million times. Thank you, thank you, thank you, thank you.....

  • @DilaniDiva
    @DilaniDiva 6 лет назад +3

    Thanks I just purchased this. This really helped. Great job explaining

  • @cathybobalek8069
    @cathybobalek8069 4 года назад

    Thanks for the information.needed.havent machine sewed for decades.so thanks for refresher .

  • @nettis1459
    @nettis1459 3 года назад

    You really Help me thank you

  • @gitoutover
    @gitoutover 4 года назад +2

    If you can't get the bobbin thread to come up, tuck an inch of it in back of the bobbin. Drape the thread backwards as shown in the video before sliding the cover over. Then, make sure you have at least 6" of thread coming out of the needle. SLOWLY turn the wheel toward you down and all the way back up. You may not see the bobbin thread yet. Slide one side of a pair of scissors between the foot and base plate of the machine to gently and slowly pull the thread all the way back. The bobbin thread should come up. Slide the scissors under again to fully pull both threads straight out.

  • @missamelie17
    @missamelie17 6 лет назад +1

    Thank you.. I am very new to sewing & your video is greatly appreciated! :-)

    • @yukki258
      @yukki258 6 лет назад

      Amelie Angels ur icnjc

  • @sadderwhiskeymann
    @sadderwhiskeymann 5 лет назад +1

    nice vid, thank you!
    to my question now:
    *none* of this vids demonstrates a sewing job for more than ~10cm.
    i bought what appears to be a Chinese rip-off, but looks/works *exactly* the same. Problem is that after about half a meter it messes up and everything unwinds (i am trying to sew a blanket) and i have to go through the whole trouble of putting the thread into the 7-step process...
    *big bummer!*
    Any advice please??

    • @FamataKay
      @FamataKay 5 лет назад

      Sadder Whiskeymann they make the fabric very short because they don’t want to waste fabric

  • @alexanderigbagwu9094
    @alexanderigbagwu9094 3 года назад

    My machine working, but not sewing, please what will I do, I love this machine thanks

  • @sudhasusmithaemani9392
    @sudhasusmithaemani9392 6 лет назад +4

    Hi, I followed the same steps as yours, but the needle does not catch the bobbin thread. Mine is a brand new machine though. Please suggest what can be done. Thanks in advance.

    • @mphillips351
      @mphillips351 6 лет назад +1

      Same here I use a cordless drill with a sharpen pencil on it and used that to load the Bobbin.

    • @ellenlaing4612
      @ellenlaing4612 6 лет назад

      im having the same problem

    • @dalbirkaur9332
      @dalbirkaur9332 6 лет назад

      Susmitha Sharma xď

    • @photographylover6457
      @photographylover6457 6 лет назад

      ellen laing ruclips.net/video/tjz8O_P6tT4/видео.html maybe this might help u

  • @marielabuiles7185
    @marielabuiles7185 3 года назад

    Buenas noches donde se consigue la tabla de la maquina gracias

  • @jeannieeaton2242
    @jeannieeaton2242 5 лет назад

    What pre wound bobbins threads could I use for this machine? Also what size needle is used.

  • @anapauladasilvaoliveira8144
    @anapauladasilvaoliveira8144 4 года назад

    Hello, if you could help me, my mini doesn't stitch, both thread are too loose, the needle pierces the fabric, the two threads are there, but don't form the stitches, what should I do? Thank you so much, Ana.

  • @rrabittz8999
    @rrabittz8999 5 лет назад

    The model of the sewing machine I’m using is very similar but the sewing machine is a little more hefty shaped and I guess you can say larger since I have seen that model to compare but it’s still a mini sewing machine. I can’t seem to have the bobber part string up and sew. It is already going through the hole but it’s not making any stitching and I can’t seem to find what’s wrong?

  • @lisapalmiero3527
    @lisapalmiero3527 6 лет назад

    I have mine threaded properly, but it will be going along fine then the thread comes out of the needle. I can tell when it happens because the carriage will start to move faster. Is it because of too much tension on the top thread, crappy thread or just a quirk in the machine?

  • @alexanderigbagwu9094
    @alexanderigbagwu9094 3 года назад

    Am from abuja Nigeria, please help me I love this machine not sewing but is work.

  • @lydialangreo9993
    @lydialangreo9993 3 года назад

    Ask ko lang kc gusto umorder how much naman po yan.hindi kaya sirain yan.tnx and godblss.

  • @aspenagoo2662
    @aspenagoo2662 6 лет назад +1

    thanks for the info

  • @tammibrown5512
    @tammibrown5512 2 года назад

    Need charging cord it didn’t have one with it and also the tension button came off can’t get it back on

  • @Chiabelss
    @Chiabelss 6 лет назад

    I have the same brand I just noticed that after I finish a stitch and cut the thread I have to unite the lower and upper thread again. Does it really work like that? Because if I don't the upper thread comes off

    • @janew1111
      @janew1111 4 года назад

      yes, well mine does!

  • @joyadako7148
    @joyadako7148 6 лет назад +1

    How can I sew it front and back

  • @carolamin8447
    @carolamin8447 6 лет назад

    That bobbing thread is not coming up, what am I doing wrong. I followed everything and nothing is happening

    • @linhengli1790
      @linhengli1790 6 лет назад

      Hi carol, i would like to suggest you contact "kpsm_service@kpe-commerce.com", it is the customer service email of Varmax. They might can help you.

  • @sewinguide2307
    @sewinguide2307 4 года назад +2

    Varmax Little Sewing Machine with Extension Table Review! || Step By Step Turotrial Of 2020

  • @sherryebersole1349
    @sherryebersole1349 4 года назад

    well from looking at all the comments I dont see any replies from Varmax , so shoot I think this is probably going back in the closet as one of my waisted spendings .I was hoping to do some simple mask making

    • @janew1111
      @janew1111 4 года назад

      there are other videos! I was just a beginner, but I figured it out!

  • @ganeshsambyal5379
    @ganeshsambyal5379 6 лет назад +2

    mini sewing machine is good product.but its not working properly thread problem plz tell me how i can use this product

  • @sheantalherrera7755
    @sheantalherrera7755 6 лет назад

    How can I sew it using a thread?

  • @mihaelagabrielasandu6330
    @mihaelagabrielasandu6330 3 года назад

    De ce îmi sare ata de la mașina de cusut la fel ca mașina aceasta

  • @LRogersPhoto
    @LRogersPhoto 4 года назад

    I lost the screw that holds the needle in place, any idea of where I can get a replacement?

  • @lilismith7227
    @lilismith7227 6 лет назад

    For some reasons I just can’t bring the bobbin threat (under threat) up.

    • @janew1111
      @janew1111 4 года назад

      your other thread needs to be long, and then, you need to turn the purple thingy towards you. if that doesn't help, you can go check out part 1 of this. to find part 1, search "varmax sewing machine part 1"

  • @applebsb75
    @applebsb75 6 лет назад +1

    My bobbing thread not coming up on top

  • @nsunilblue4698
    @nsunilblue4698 6 лет назад

    The niddle that can't catch that bobbin thread what can I do please answer me

  • @baatsebachauke7573
    @baatsebachauke7573 6 лет назад

    Does this feature a zic zac pattern?

    • @eraturbo99999
      @eraturbo99999 6 лет назад

      No, this machine can only do basic stitching. The machines that can do different patterns are usually more expensive than this one. This one is normally sold for $20 and under.

  • @2SpoiledCatsFitness
    @2SpoiledCatsFitness 6 лет назад

    you do not show how to get the winding pole out! If you could add that, it would be appreciated.

    • @varmaxlimited6996
      @varmaxlimited6996  6 лет назад

      Dear customer, we have added a video to show how to get the winding pole works. please click the ruclips.net/video/OfKf1WuO974/видео.html . Hope this can help you.

    • @varmaxlimited6996
      @varmaxlimited6996  6 лет назад

      Dear customer, we have added a video to show how to get the winding pole works. please click the ruclips.net/video/OfKf1WuO974/видео.html . Hope this can help you.

    • @varmaxlimited6996
      @varmaxlimited6996  6 лет назад

      Dear customer, we have added a video to show how to get the winding pole works. please click the ruclips.net/video/OfKf1WuO974/видео.html . Hope this can help you.

    • @varmaxlimited6996
      @varmaxlimited6996  6 лет назад

      Dear customer, we have added a video to show how to get the winding pole works. please click the ruclips.net/video/OfKf1WuO974/видео.html . Hope this can help you.

    • @varmaxlimited6996
      @varmaxlimited6996  6 лет назад

      Dear customer, we have added a video to show how to get the winding pole works. please click the ruclips.net/video/OfKf1WuO974/видео.html . Hope this can help you.

  • @francesadelaidebowensharri9404
    @francesadelaidebowensharri9404 4 года назад

    Replacement needles where do you get them what brand?

    • @amesale1t
      @amesale1t 4 года назад

      You can get them on Amazon and they are 90/14 organ brand

  • @jpemm2418
    @jpemm2418 6 лет назад

    How do you sew using the thread spindle?

  • @jasnavijasu9034
    @jasnavijasu9034 6 лет назад

    Machine is not striched what I do

  • @mahmudaakter2379
    @mahmudaakter2379 5 лет назад

    Eta te tension kharap hoy.ki korle selai ta thik hobe ektu janaben.uporer selai thik hoy bt nicer selai thik moto hoy na

  • @rehabomar5708
    @rehabomar5708 6 лет назад

    بكام المكنة دى بالمصرى؟😂😂😂😂😂

  • @robyndemmings4107
    @robyndemmings4107 4 года назад

    My needle broke

  • @taraharan4524
    @taraharan4524 6 лет назад

    How to rethread an empty bobbin

    • @Livience
      @Livience 6 лет назад

      Go to 5:58 in the video ruclips.net/video/TKJazx_KZuc/видео.html

  • @nikokostov529
    @nikokostov529 4 года назад

    iskam da por4m

  • @kavya051003
    @kavya051003 6 лет назад

    It's working, but not getting stitched properly, means getting loose stitching in some places

  • @tejaalapati8428
    @tejaalapati8428 6 лет назад

    in tulugu Voice

  • @emiliek.7943
    @emiliek.7943 5 лет назад

    This whole things a scam! Why did I just find this exact video on 3 different channels?? No wonder I don’t get a reply on my questions

  • @sbabujbangla4050
    @sbabujbangla4050 6 лет назад

    not good

  • @mxwxgxgxb
    @mxwxgxgxb 6 лет назад

    Its not a good machine. Its worst than a toy.

  • @LRogersPhoto
    @LRogersPhoto 4 года назад +1

    I lost the screw that holds the needle in place, any idea of where I can get a replacement?