Nice setup mate, i received the motors and wiring today for the E racing RS MEGA+ today just waiting on the actuators. Besides the buttkickers does the software you use do haptics?
Hey just got one fo these setups as well and run the g2 as well, did you find that you needed to run motion compensation? I sometimes get a grey screen loss of tracking and not sure if it i from the tracking or possible emi. I know wmr adds a grey screen when tracking is lost.
Hi. Thanks. I'm only using 4. I have extra, but I don't need them. There's absolutely no flex at the crossbar. I have two corner brackets on the bottom, and two in the front. This keeps the crossbar from twisting (instead of having two on the bottom and two on the top..
I used these as rails across the top and bottom to attach the drives inside the enclosure with sheet metal screws. www.amazon.com/dp/B0925T8BF7/ref=sspa_dk_detail_1?psc=1&pd_rd_i=B0925T8BF7&pd_rd_w=TGPXH&content-id=amzn1.sym.7b21e0c7-2d6d-4279-a40b-74d2b0593b5a&pf_rd_p=7b21e0c7-2d6d-4279-a40b-74d2b0593b5a&pf_rd_r=5Z6TF7P4AN1M398BPCB8&pd_rd_wg=NfldF&pd_rd_r=b5b13375-e0f8-4bb8-8b18-0c2316bd83b6&s=aht&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWxfdGhlbWF0aWM&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzMUtNUVk5VlBWSkpCJmVuY3J5cHRlZElkPUEwMDA1MDM3MkNKRTgxQlpUR1lPJmVuY3J5cHRlZEFkSWQ9QTEwMTE1NzMxSzlJQU9DOEdBS1FIJndpZGdldE5hbWU9c3BfZGV0YWlsX3RoZW1hdGljJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==
@@pwsmanowar I had some issues with EMI but they are gone with 4 ferrite cores . I just felt it when I was touching my Varjo Aero headset. The screen went grey for like 5 seconds. That was it. After I looped my VR Cable 4 times each thru 2 ferrite cores it was gone. Some people had to use 3 Cores. Beside that I felt nothing. I used the 2 other cores in my cabinet where i looped the electrocables thru it.
Nice set up, do u not get any issues with EMI wen running VR and the eRacing motion? I used to have the eRacing but I only use VR and I was getting nothing but problems with tracking when the motion was switched on?
@@CaliCuh I use the Varjo Aero VR and it was literally unplayable in VR when motion was running, there are allot of issues with this system that people fail to mention, because it’s a DIY system you will get allot of issues as it’s not plug and play, my main issues was EMI which is an interference from the servo drives, it’s effects my VR tracking, one minute ur driving next ur in the crowd somewhere cuz VR lost tracking, also my Simucube wheel would just go mental spinning sometimes, a constant earth loop problem too, I research forums for weeks for fixes, like EMI filters, ferrite cores, earthing my rig, but still the same, I ended up jus selling it and buying a D-Box, I think the eRacing system is decent for monitors but VR was a nightmare for me, but bare in mind I use base stations for my tracking, just giving you information I wish someone had told me mate before I purchased
@@SURG3NT mines is actually not a diy system. They have a new package where everything is plug and play and configured For 2023 . Yea no base stations for me . I was going to go dbox but this is hnder half the price so I will try it out.
@@CaliCuh mine was the RS mega+, u still have a lot of wiring to do, I had to also program servos, maybe the new version is different for you hopefully, as wen the system worked it was pretty good, it was jus more fixing issues rather than driving with me,
Nice vid and setup. I want to get the RS Mega+. Had no idea the controller modules were that big...
Nice setup mate, i received the motors and wiring today for the E racing RS MEGA+ today just waiting on the actuators. Besides the buttkickers does the software you use do haptics?
thanks for you reply.. MR Moore.
Have you tried your rig with flight sim. I want to know if it's smooth and don't have any cogging or jittering ? Thanks
what are your acc settings and openxr settings, what do you mean by drss enabled?
Le Gt1 Evo est suffisamment rigide ? apparemment il est conseillé de partir sur le P1 pour du Motion, en tout cas super config 👍
Hey just got one fo these setups as well and run the g2 as well, did you find that you needed to run motion compensation? I sometimes get a grey screen loss of tracking and not sure if it i from the tracking or possible emi. I know wmr adds a grey screen when tracking is lost.
Hello ! Just add extra corner brakets on the profile that sustain your wheelbase , do u have only 4 , add another 4
This is my old build but you can see the extra corners ruclips.net/video/BYsu-ux4n9w/видео.html
Hi. Thanks. I'm only using 4. I have extra, but I don't need them. There's absolutely no flex at the crossbar. I have two corner brackets on the bottom, and two in the front. This keeps the crossbar from twisting (instead of having two on the bottom and two on the top..
Beautiful rig btw.
hello ..quick question where did you get the metal box from that has your actuator control gear in ? or does it come with the kit?
Hi... www.amazon.com/gp/product/B07NPG9Z5P/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
I used these as rails across the top and bottom to attach the drives inside the enclosure with sheet metal screws. www.amazon.com/dp/B0925T8BF7/ref=sspa_dk_detail_1?psc=1&pd_rd_i=B0925T8BF7&pd_rd_w=TGPXH&content-id=amzn1.sym.7b21e0c7-2d6d-4279-a40b-74d2b0593b5a&pf_rd_p=7b21e0c7-2d6d-4279-a40b-74d2b0593b5a&pf_rd_r=5Z6TF7P4AN1M398BPCB8&pd_rd_wg=NfldF&pd_rd_r=b5b13375-e0f8-4bb8-8b18-0c2316bd83b6&s=aht&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWxfdGhlbWF0aWM&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEzMUtNUVk5VlBWSkpCJmVuY3J5cHRlZElkPUEwMDA1MDM3MkNKRTgxQlpUR1lPJmVuY3J5cHRlZEFkSWQ9QTEwMTE1NzMxSzlJQU9DOEdBS1FIJndpZGdldE5hbWU9c3BfZGV0YWlsX3RoZW1hdGljJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==
Have you had any EMI issues? Any interference with the VR headset? Thanks
Nope. None.
@@pwsmanowar I had some issues with EMI but they are gone with 4 ferrite cores . I just felt it when I was touching my Varjo Aero headset. The screen went grey for like 5 seconds. That was it. After I looped my VR Cable 4 times each thru 2 ferrite cores it was gone. Some people had to use 3 Cores. Beside that I felt nothing. I used the 2 other cores in my cabinet where i looped the electrocables thru it.
Hey Ralph rad set up did you need to bring 220v outlet into the room to run the mega+ servo actuators?
Thanks. Nope, there's a setting that tells it 110 or 220. Either on the Thanos or the drives. Off hand, I forget.
@@pwsmanowar I would assume you would be sacrificing alot of speed running at a lower voltage but glad to hear it works on 110v
@@fulybuilt I run it about 50%-70% . Seems to react similar to other sfx-150 type rigs you see on RUclips.
@@pwsmanowar I emailed them and they confirmed no difference I subscribed to your channel.
@@fulybuilt good to know. Thanks!
Nice set up, do u not get any issues with EMI wen running VR and the eRacing motion? I used to have the eRacing but I only use VR and I was getting nothing but problems with tracking when the motion was switched on?
I just ordered a rs mega+ last week. What issues are you getting as to I’m a vr user also. I have a oculus rift s .
@@CaliCuh I use the Varjo Aero VR and it was literally unplayable in VR when motion was running, there are allot of issues with this system that people fail to mention, because it’s a DIY system you will get allot of issues as it’s not plug and play, my main issues was EMI which is an interference from the servo drives, it’s effects my VR tracking, one minute ur driving next ur in the crowd somewhere cuz VR lost tracking, also my Simucube wheel would just go mental spinning sometimes, a constant earth loop problem too, I research forums for weeks for fixes, like EMI filters, ferrite cores, earthing my rig, but still the same, I ended up jus selling it and buying a D-Box, I think the eRacing system is decent for monitors but VR was a nightmare for me, but bare in mind I use base stations for my tracking, just giving you information I wish someone had told me mate before I purchased
@@SURG3NT mines is actually not a diy system. They have a new package where everything is plug and play and configured For 2023 . Yea no base stations for me . I was going to go dbox but this is hnder half the price so I will try it out.
@@CaliCuh mine was the RS mega+, u still have a lot of wiring to do, I had to also program servos, maybe the new version is different for you hopefully, as wen the system worked it was pretty good, it was jus more fixing issues rather than driving with me,
@@SURG3NT yea Servos are pre configured and everything is plug and play .