How did you connect the adapter to the clear hose, did you have to make the hole a little bit bigger for the adapter to fit? Really having a hard time trying to get air in. I even tried with a nitrogen needle adapter.
Good Help! For filling with air I took a needle for filling a Footbal and put a shrinking tube around it. When pushing the piston in the inner tube came out. So I had to use a short pipe to hold it back.
@@nathanielandrade2371 he's pushing the floating piston in the outer chamber to push the oil into the centre chamber, oil on inside, to the float then air on the outside of the float.
Bless you. Thanks for the awesome video!
How did you connect the adapter to the clear hose, did you have to make the hole a little bit bigger for the adapter to fit? Really having a hard time trying to get air in. I even tried with a nitrogen needle adapter.
Thanka for the video . What psi did you put in the post please .
Thanks
Andrew
Now i can work on my dropper post. Thank you. Can we use any fork oil for this?
Good Help! For filling with air I took a needle for filling a Footbal and put a shrinking tube around it. When pushing the piston in the inner tube came out. So I had to use a short pipe to hold it back.
Where to buy the pressure adapter?
Does that oil will work Castrol EDGE 5W30 LL 1L???
Hello what is the needle gauge or diameter did you use
Hello, how to get the red tip that connects to the seatpost to put the pressure back? Thanks for your help Chris
In my case, I used the light gas refill plastic adaptor
In my country, normally included gas refill adapter.
How do you put air on it ?
Pls do not put on high pressure.
hello，air how many psi？
@@unknownuser39999 do not put hign pressure on it
Hi, how many bars (air) you pump the droper on ??
What the Part with the Wire for? pushing something deeper. What, why ?
You can use a thin, strong wire
Be careful not to get a scratch when using it.
The resaon is to minimize the air in the chamber.
@@lulu-oc4zp thanks.
At around the 7 minute time mark, what did you use the long wire for?
Use thick steel wire or plastic that does not bend well.
@@lulu-oc4zp did you use it to push something like a seal?
@@nathanielandrade2371 he's pushing the floating piston in the outer chamber to push the oil into the centre chamber, oil on inside, to the float then air on the outside of the float.
@@simonhigh5914 , thank you.
Hello, many oil you put?
Pls fill oil up to top of inner tube.
please pur oil upto top od inner tube.
Hi, What type of oil you used in this video ?
Hi. I'm using SAE 5W-30.
@@lulu-oc4zp OK, thanks. Is this KS i900R or KSi950R ?
Same All~~, Have a good riding!!
lulu룰루 ok, thanks a lot
@@lulu-oc4zp does that oil will work? Castrol EDGE 5W30 LL 1L???