Thanks for listening to the Yuck Fam, very2 unique grip, 1st time ive seen the battery grip( except for the battery grips for coils and regular rotaries you've reviewed before), the best machine from Mast, for me at least, i believe the eccentric cam can be changed to a 4.2-5mm, definitely in my wishlist for sure🤘🏻
It can definitely shade as that would greatly depend on our technical application. And it can also pack nicely as well with ease. I would recommend it to anyone who’s looking for a good & affordable tattoo machine. It really depends on the artists what’s and needs that would determine what machine one is right for them.
Ooooo this is super difficult to answer. I don’t have a favorite as I like most machines I have used for different reasons. What I can do is say what machine would I use if I had to use 1 machine indefinitely would be the Neuma 4 because of the performance and features but I’m not a big fan of loud tattoo machines. I have full reviews on my channel on the neuma 4. My brain also says inkclaw, cnc, ambition, dragonhawk haha. It’s very difficult for me to answer. Haha. I hope this helps in some way .
Thats a great question! I would say the CNC Q2 is a great place to begin! We can change the cam wheel so we can get a harder or softer hit from the Q2. Dragonhawk also has a nice looking little PMU machine as well that would be suitable for this application. I would say a mid to softer hit would be ideal for scalp micro pigmentation. I will link you below to a few machine that I feel would be great for this. Dragonhawk PMU Pen dragonhawkofficial.com/all-products/permanent-makeup-machines/pmu-machines/wireless-tattoo-pen-machine-with-2-5mm-stroke-permanent-makeup-mast-p20/?ref=3cqB0cjX CNC Q2 Terminator Tattoo Machine www.cnctattoo.com/shop/cnc-q2-tattoo-pen-machine-terminator/?ref=10 CNC Q2 Kit www.cnctattoo.com/shop/tattoo-machine-q2-professional-shader-with-3-boxes-cartridge-kit/?ref=10 CNC Q2 & Series Cam www.cnctattoo.com/shop/stroke-for-q-series-tattoo-machine-3-4-mm/?ref=10 CNC Q2 Lorna Tattoo Machine www.cnctattoo.com/shop/cnc-q2-tattoo-pen-lorna/?ref=10
I love mast and I love ambition but ambition has been more reliable and more consistent and they hit hard bro u can do power lines u can do fine line and I’ve put mine through the ringer it’s my daily but I also use a bronc v10 and my cnc q2 it’s about the motor and mechanism that runs the machine cnc is great but all the cams are the same even though they are supposed to be 3 3.5 and 4 they aren’t they just made the push rod longer
Cnc q2 is an amazing shader and small lines and my bronc v10 is an amazing liner and super smooth shading and packing but u can’t use big mags or big RS it’s more for packing in small areas or knees elbows and hands but the ambition is what I run lines with RS and pack big areas of black and do stipple shading sometimes depending on where it’s at on the body
Ohh if I had to pick I would pick the Mast Tour Pro Plus because the design. If I remember correctly we can take apart the tour pro to sterilize the bar, and inside of the machine. Also because the mast tour pro is more of my style of machine in terms of personal preference. However I don’t think we can go wrong with either or as both machines perform on multiple fronts.
I think, is the BEST review i ever seen, with no doubt!
Thank you for the kind feedback and support! I appreciate that 🤝
Thanks for listening to the Yuck Fam, very2 unique grip, 1st time ive seen the battery grip( except for the battery grips for coils and regular rotaries you've reviewed before), the best machine from Mast, for me at least, i believe the eccentric cam can be changed to a 4.2-5mm, definitely in my wishlist for sure🤘🏻
Thank you very much for your continued time and support my friend! You are greatly appreciated 🤝
Is it a good shadow and fill machine that can create clear lines? should i buy? or a machine you can recommend for this ?
It can definitely shade as that would greatly depend on our technical application. And it can also pack nicely as well with ease.
I would recommend it to anyone who’s looking for a good & affordable tattoo machine. It really depends on the artists what’s and needs that would determine what machine one is right for them.
Suprised more people aren’t talking about this machine. Seems awesome for hygiene reasons 😊
It’s an all around good machine! I personally love it. Thank you for your feedback time and support!
Ordered many machines now from your review, my favorite I would say is the Mummy adjustable machíne, love how strong the motor is🤘🏻
Can you use rca jack as well ?
How bad is the vibration and the heating? Some say it's really significant, others don't even mention it, I'm getting confused.
Daniel, which is your most used tattoo machine today? Your go to machine? Thanks!
Ooooo this is super difficult to answer. I don’t have a favorite as I like most machines I have used for different reasons.
What I can do is say what machine would I use if I had to use 1 machine indefinitely would be the Neuma 4 because of the performance and features but I’m not a big fan of loud tattoo machines. I have full reviews on my channel on the neuma 4.
My brain also says inkclaw, cnc, ambition, dragonhawk haha. It’s very difficult for me to answer. Haha. I hope this helps in some way .
I use a Mast racer was curious what voltage where you operating at for packing black?
That is a great question!
I like to run at about 6-6.5 volts when it comes to packing black and color.
Appreciate the response I run at 6.5 for packing so perfect, great to know. Thank you so much! Always enjoy all your content keep it up much love!
Is it better for line work then a Ambition Torped?
I wouldn’t be able to answer that and for that I apologize. I haven’t tried the ambition torped but should this change I will bring a review.
What would you suggest for Scalp Micropigmentation?
Thats a great question!
I would say the CNC Q2 is a great place to begin! We can change the cam wheel so we can get a harder or softer hit from the Q2. Dragonhawk also has a nice looking little PMU machine as well that would be suitable for this application.
I would say a mid to softer hit would be ideal for scalp micro pigmentation.
I will link you below to a few machine that I feel would be great for this.
Dragonhawk PMU Pen
dragonhawkofficial.com/all-products/permanent-makeup-machines/pmu-machines/wireless-tattoo-pen-machine-with-2-5mm-stroke-permanent-makeup-mast-p20/?ref=3cqB0cjX
CNC Q2 Terminator Tattoo Machine
www.cnctattoo.com/shop/cnc-q2-tattoo-pen-machine-terminator/?ref=10
CNC Q2 Kit
www.cnctattoo.com/shop/tattoo-machine-q2-professional-shader-with-3-boxes-cartridge-kit/?ref=10
CNC Q2 & Series Cam
www.cnctattoo.com/shop/stroke-for-q-series-tattoo-machine-3-4-mm/?ref=10
CNC Q2 Lorna Tattoo Machine
www.cnctattoo.com/shop/cnc-q2-tattoo-pen-lorna/?ref=10
Is it better then the Mast Fold pro?
I don’t think I have tried the mast fold
Pro as of yet but shouldn’t I get my hands on this machine I will surely bring a review.
Which is a better machine ? This or mast tour pro plus ?
I love mast and I love ambition but ambition has been more reliable and more consistent and they hit hard bro u can do power lines u can do fine line and I’ve put mine through the ringer it’s my daily but I also use a bronc v10 and my cnc q2 it’s about the motor and mechanism that runs the machine cnc is great but all the cams are the same even though they are supposed to be 3 3.5 and 4 they aren’t they just made the push rod longer
Cnc q2 is an amazing shader and small lines and my bronc v10 is an amazing liner and super smooth shading and packing but u can’t use big mags or big RS it’s more for packing in small areas or knees elbows and hands but the ambition is what I run lines with RS and pack big areas of black and do stipple shading sometimes depending on where it’s at on the body
@@josephwhitaker7973 which ambition if i may ask
Ohh if I had to pick I would pick the Mast Tour Pro Plus because the design. If I remember correctly we can take apart the tour pro to sterilize the bar, and inside of the machine. Also because the mast tour pro is more of my style of machine in terms of personal preference.
However I don’t think we can go wrong with either or as both machines perform on multiple fronts.
Ayyy thanks for the feedback Joseph! It is appreciated.
Nice one! 🤙🏻
Thank you for your time and support Jessica! I appreciate you.
Thank you for bring us this review only thing I wished mast would do is Disposable grips for all there tattoo machine
You’re welcome Michael! I appreciate your continued support and feedback.
I think disposable grips would be awesome as well!
Heck yeah!!!!
Thank you for your feedback upgrade!
Ciao io ho la mast flip e comincia d’armi problemi, il motore non ha i giri regolari, che posso fare? Grz