Thanks for the upload. Are you happy with his setup? Seems like this is the only crossbar setup I can find that you can use with a folding tonneau cover. My only gripe is how much the brackets stick out when the rails are removed, a lower profile would be perfect. Do you know of any other companys making similar products?
I'm pretty happy with this setup. It rains a lot where I live. I find this useful to my everyday. I don't know any other companies that does this. The brackets does stick out but it also gives me an extra 2 inchs of height. Hope this helps
Do you think that the 18” rack would provide enough clearance to open up another fold of the Bakflip? Is it the width or height of the rack preventing further opening?
@@911sc1981 yes and no. No for tri-folds because the height clearance doesn't allow it. when opening you'd need a foot or more of a clearence to open. Though from my research my OEM tonneau cover sits underneath the KB voodoo tonneau cover addon which does not allow it to open. IMO though Its sort of like having two spaces. One inside the truck bed and then on top of the truck bed. Though if you have a roll up or one of those fancy electronic sliders then yes
Project Onix my question would be if you’re able to flip your bakflip to the 3rd panel (the fold before it leans on the truck) and then install the bed rack, or does the Height of the folded portion interfere with the angled bed rack arms. Thank in advance!
Hi there, can you do a follow up video with the roof top tent on it pls? I would love to know if this 14” rack gives enough room in the bed to pack a lot of gear or “18 is better. Thnx
So I just bought the hi rise bars from voodoo and have the Bakflip g2. I got the brackets which are beefer than the ones you have. Did you have to shave any of the plastic black inside rail on the truck at all so that the silver Bakflip relocator brackets fit? Tough to explain, sorry. It the seal still good or do you have any leaks? Seeams like it is going to be a really tight fit with these brackets for the tri fold to close.
i like how you showed how this turned out. I didnt know that the brackets replace the ones that came with the bakflip. Very nice how bad does it leak tho?
I have a ultraflex trifold tonneau cover. What brackets do i need so i can do the same set up as yours? My factory railings are already used by the cover
Just first unfold of it. Unfortunately not the whole thing. I still like it because it protects it from the outside elements. It rains a lot where I live.
@@pinay56 I never said the flip cover will work. Where I live it rains a lot. The bed cover helps protects it. If you go with the retrax system it will work. 👍
Wow..this is bad design especially for an off-road use. Only 4 bolts and especially the 4 flimsy L brackets at the support bases. A square tubing at the base would provide much better support than the L brackets.
That's nice; but you don't have the film on how all of this works, and for some who would like this setup, it would be helpful if you could demonstrate how the BakFlip works with the Voodoo rack installed. For all we know, you could be blowing smoke up our asses, and we all have to depend on your say so that it works......
*I drove 20 hours across state with a **Latest.Bike** on this rack never budged. Highly impressed. Easy install one two go!*
Can you open the tonneau cover with the rack on?
The one thing I came here to see and he doesn't lift the cover under the rack 😭
In for the answer also
EXACTLY what I was wanting to know!
Definitely can’t. Lol.
They have a higher rack but i don't think that 14" will allow the tri fold to clear
can you open the trifold with the rack fully asembled?
Can you still open the bakflip all the way with that rack?
The most important info is missing! Cannyou open the tonneau or not?
Can you still open the tonneau properly ? Thanks
Does the cover still fold back under the rack?
Very EFFECTIVE
Can the Bakflip still be folded all the way to the window w/ the bedrack on?
Can you still open your bakflip with the rack on? I would get one that would make everything functional
he ever answer these questions?
I have the same question
This is bogas, if anyone can show the backflip open we are interested
@@burnsbrigade no reply so far
Good video and finally…the kinda rack I’d like to see matched with the MX4.
Do you know if they make this for F150’s? Thanks.
Thanks for the upload.
Are you happy with his setup? Seems like this is the only crossbar setup I can find that you can use with a folding tonneau cover.
My only gripe is how much the brackets stick out when the rails are removed, a lower profile would be perfect.
Do you know of any other companys making similar products?
I'm pretty happy with this setup. It rains a lot where I live. I find this useful to my everyday. I don't know any other companies that does this. The brackets does stick out but it also gives me an extra 2 inchs of height. Hope this helps
Now with the brackets does the rated Capacity of the dynamic and static change.
I believe not by much. I recommend getting bed stiffiners brackets
Will those brackets hold a rooftop tent with 2-3 people in it?
Do you think that the 18” rack would provide enough clearance to open up another fold of the Bakflip? Is it the width or height of the rack preventing further opening?
I haven't seen anyone with a 18" and a Bakflip yet. That may be possibility.
That looks sick
Really wish you would have opened the tonnue cover lol
How's the aluminum rack holding up? Debating between the steel and aluminum one. Any visible cracks anywhere?
Where can i get that relocating bracket, im trying to do the same thing without getting rid of my trifold.
Subbed
So does the Bakflip still open with the rack in place? You don't show the tonneau cover in the open position
Can you open the bakflip tonneau with rack installed?
Any water enter the bed with the brackets?
Hi. Any issues to report since you installed? I have about 500 lbs to put on top of this rack with the the same BAKFlip cover you have.
Can your mx4 open with the rack on?
Can you respond to this question? Thanks!
@@911sc1981 yes and no. No for tri-folds because the height clearance doesn't allow it. when opening you'd need a foot or more of a clearence to open. Though from my research my OEM tonneau cover sits underneath the KB voodoo tonneau cover addon which does not allow it to open. IMO though Its sort of like having two spaces. One inside the truck bed and then on top of the truck bed. Though if you have a roll up or one of those fancy electronic sliders then yes
Did you ever trim the backflip base to accommodate the side of the kb voodoo brackets?
Does the tonneau cover opens still?
Very nice dude! How are you liking the the setup after having it for a while?
What is the height from the bed liner to the bottom of the rack in the middle? I wanna know if I’d be able to tuck two recreational kayaks in there.
Hi, Are T-slot nuts needed to bolt the brackets unto the Tacoma bed rail? If so, which one's did you buy?
You think that setup would make your prinsu flush with with prinsu top rack over the voodoo?
It's not 100% flush. But with a spare tire or rtt looks great with it
Saw that you had a third bar added to your RTT does that help with distributing the weight or increasing the weight the rack can handle?
Are you able to open the backflip with the bed rack installed?
Unfortunately no. But it keeps everything safe and dry from the elements
Project Onix my question would be if you’re able to flip your bakflip to the 3rd panel (the fold before it leans on the truck) and then install the bed rack, or does the Height of the folded portion interfere with the angled bed rack arms. Thank in advance!
@@ColtenJuliana unfortunately it does interfere with the rack. I would recommend looking at the retrax pull system bed covers. 👍
Hi there, can you do a follow up video with the roof top tent on it pls? I would love to know if this 14” rack gives enough room in the bed to pack a lot of gear or “18 is better. Thnx
Follow up would be great. maybe a 1 year later.
So I just bought the hi rise bars from voodoo and have the Bakflip g2. I got the brackets which are beefer than the ones you have. Did you have to shave any of the plastic black inside rail on the truck at all so that the silver Bakflip relocator brackets fit? Tough to explain, sorry. It the seal still good or do you have any leaks? Seeams like it is going to be a really tight fit with these brackets for the tri fold to close.
what happened to the spare tire mount video ?
Did the OEM rail relocation kit come with your order? was it a separate option?
Separate order.
Do you happen to have the link for the rail relocation kit? I looked on Voodoo's website and I didn't have any luck finding it.
@@aamstutz69 it should be on there. Don't use the drop down. Go to the extras sections. You will see the bakflip relocation bracket
Los felicito, un muy buen video, un abrazo desde Perú.
Nice video, what gun case is that mounted to your roof rack?
Thanks! Plano tactical case 👍
Do you get water leakage in your truck bed with the adapter brackets?
Very little. Nothing major.
Hi, with the rack mounted can you open the bed cover fold and unfold?
How is the stability of it. Seems like the bends and screws may be the week points. Do you know what the static limit is?
The static load is listed as 600lbs on their website.
i like how you showed how this turned out. I didnt know that the brackets replace the ones that came with the bakflip. Very nice
how bad does it leak tho?
Thanks! Leak isn't that bad. Only a little here and there. 👍
I have a ultraflex trifold tonneau cover. What brackets do i need so i can do the same set up as yours? My factory railings are already used by the cover
Did you ever figure this out? I don't have the relocated railings either
Any update??
Camera very hard to follow so shaky I fast forward the video get away from the dizziness
Do u talk to customer service regarding on your bracket?
I've emailed him back and forth. No issues. He was very helpful.
I can see only on website is short bed 46” long and long bed 58” but yours 48”?
correct. I have a short bed tacoma
Do they make it for tundras??
They do 👍
any issues since the install, any bending on the brackets?
So any issues with the brackets so far?
Are you able to open the bakflip still?
Just first unfold of it. Unfortunately not the whole thing. I still like it because it protects it from the outside elements. It rains a lot where I live.
@@ProjectOnix: So it doesn't work... How can anyone say that this really works when all you have is 1/3rd that actually flips backward....
@@pinay56 I never said the flip cover will work. Where I live it rains a lot. The bed cover helps protects it. If you go with the retrax system it will work. 👍
How is the visibility throught the rear window?
Clear! 👍 The relocation bracket gives it an extra 2 inches of height. It's perfect
tonneau cover will not open
But you can't open the cover. So you have to take off the rack to open it. That's stupid.
Wow..this is bad design especially for an off-road use. Only 4 bolts and especially the 4 flimsy L brackets at the support bases. A square tubing at the base would provide much better support than the L brackets.
That's nice; but you don't have the film on how all of this works, and for some who would like this setup, it would be helpful if you could demonstrate how the BakFlip works with the Voodoo rack installed. For all we know, you could be blowing smoke up our asses, and we all have to depend on your say so that it works......